Nutek BT-2102M-1 Portable Bluetooth Speaker User Manual

pengenalan

This manual provides comprehensive instructions for the safe and efficient operation of your Nutek BT-2102M-1 Portable Bluetooth Speaker. Please read this manual thoroughly before using the device and retain it for future reference.

Kandungan Pakej

Sahkan bahawa semua item yang disenaraikan di bawah terdapat dalam pakej anda:

• 1 x Nutek BT-2102M-1 Portable Bluetooth Speaker
• 1 x Kabel Pengecas USB
• 1 x 3.5mm Audio Cable (AUX)

Image: Nutek BT-2102M-1 Portable Bluetooth Speaker with included USB charging cable and 3.5mm audio cable. This image displays the Nutek BT-2102M-1 portable Bluetooth speaker, a black rectangular device with a perforated grille. Below it are two cables: a black USB charging cable with a standard USB-A connector on one end and a micro-USB connector on the other, and a black 3.5mm audio cable with male stereo jacks on both ends.

Produk Selesaiview

The Nutek BT-2102M-1 is a compact, portable Bluetooth speaker designed for wireless audio streaming and hands-free calling. It features multiple connectivity options including Bluetooth, AUX input, and FM radio. The speaker is equipped with a built-in microphone for hands-free communication and is powered by a rechargeable lithium-ion battery.

Komponen utama biasanya merangkumi:

• Penceramah Grille
• Control Buttons (Power, Volume, Play/Pause, Mode)
• Mikrofon
• Charging Port (Micro-USB)
• AUX Input Port (3.5mm)
• Lampu Penunjuk LED

Persediaan

1. Mengisi Speaker

1. Connect the small end of the USB charging cable to the Micro-USB port on the speaker.
2. Sambungkan hujung kabel pengecas USB yang lebih besar ke penyesuai kuasa USB (tidak disertakan) atau port USB komputer.
3. The LED indicator light will illuminate, typically red, to indicate charging.
4. Once fully charged, the LED indicator light will change color or turn off (refer to specific product behavior). A full charge usually takes 2-3 hours.

2. Hidupkan/Mati Kuasa

• Untuk menghidupkan, tekan dan tahan kuasa button for approximately 3 seconds. An audible tone or voice prompt will confirm the speaker is on.
• Untuk mematikan, tekan dan tahan kuasa button for approximately 3 seconds. An audible tone or voice prompt will confirm the speaker is off.

3. Berpasangan Bluetooth

1. Ensure the speaker is powered on and in Bluetooth pairing mode. The LED indicator light will typically flash blue rapidly.
2. On your Bluetooth-enabled device (smartphone, tablet, computer), navigate to the Bluetooth settings.
3. Scan for available devices. You should see "BT-2102M-1" or "Nutek Speaker" in the list.
4. Pilih pembesar suara daripada senarai untuk memulakan penggandingan.
5. Once successfully paired, the speaker will emit an audible confirmation, and the LED indicator light will typically turn solid blue or flash slowly.
6. Jika digesa untuk kata laluan, masukkan "0000".

4. AUX (Audio Input) Connection

1. Sambungkan satu hujung kabel audio 3.5mm ke port input AUX pada pembesar suara.
2. Connect the other end of the 3.5mm audio cable to the headphone jack or audio output port of your external audio device.
3. The speaker should automatically switch to AUX mode, or you may need to press the Mod button to select AUX input.

5. Persediaan Radio FM

1. Hidupkan pembesar suara.
2. Tekan ke Mod button repeatedly until FM Radio mode is selected.
3. Untuk mengimbas secara automatik dan menyimpan stesen FM yang tersedia, tekan dan tahan butang Main/Jeda butang. Pembesar suara akan mengimbas dan menyimpan stesen secara automatik.

Arahan Operasi

1. General Controls

• Butang Kuasa: Tekan dan tahan untuk menghidupkan/mematikan kuasa.
• Butang Mod: Press to switch between Bluetooth, AUX, and FM Radio modes.
• Butang Main/Jeda: Press to play or pause audio. In FM mode, press and hold to auto-scan.
• Kelantangan Naik (+): Press to increase volume. Press and hold to skip to the next track (in Bluetooth/USB mode) or next FM station.
• Perlahankan suara (-): Press to decrease volume. Press and hold to skip to the previous track (in Bluetooth/USB mode) or previous FM station.

2. Operasi Mod Bluetooth

• Main Balik Muzik: After successful pairing, open your music application on your connected device and begin playback. Use the speaker's Play/Pause, Volume Up, and Volume Down buttons to control playback.
• Panggilan Bebas Tangan:
  • Apabila panggilan masuk, pembesar suara akan berdering. Tekan ke Main/Jeda butang untuk menjawab panggilan.
  • Untuk menamatkan panggilan, tekan butang Main/Jeda butang lagi.
  • Untuk menolak panggilan masuk, tekan dan tahan Main/Jeda butang.
  • Untuk mendail semula nombor terakhir, tekan dua kali butang Main/Jeda butang.

3. Operasi Radio FM

• Pemilihan Stesen: After auto-scanning, briefly press the Kelantangan Naik (+) or Perlahankan suara (-) butang untuk menavigasi stesen yang disimpan.
• Pelarasan Kelantangan: Gunakan Kelantangan Naik (+) or Perlahankan suara (-) butang untuk melaraskan kelantangan.

Penyelenggaraan

• Pembersihan: Gunakan kain lembut dan kering untuk membersihkan bahagian luar pembesar suara. Jangan gunakan pembersih, lilin atau pelarut yang kasar.
• Storan: Simpan pembesar suara di tempat yang sejuk dan kering jauh dari cahaya matahari langsung dan suhu yang melampau.
• Penjagaan Bateri: Untuk memanjangkan hayat bateri, elakkan daripada kerap mencas sepenuhnya bateri. Cas pembesar suara secara berkala, walaupun tidak digunakan, untuk mengekalkan kesihatan bateri.
• Pendedahan Air: Peranti ini tidak kalis air. Elakkan pendedahan kepada air atau kelembapan berlebihan.

Menyelesaikan masalah

Spesifikasi

Waranti dan Sokongan

The Nutek BT-2102M-1 Portable Bluetooth Speaker comes with a Waranti Terhad. Please refer to the warranty card included in your original packaging for specific terms and conditions, including coverage duration and claim procedures.

For technical support or warranty inquiries, please contact Nutek customer service through the contact information provided with your product or on the official Nutek webtapak.