1. Pengenalan
This manual provides essential information for the proper installation, operation, and maintenance of your DS18 PRO-X10M 10-Inch Classic 8-Ohm Midrange Loudspeaker. Please read these instructions thoroughly before use to ensure optimal performance and longevity of your product. Retain this manual for future reference.
2. Maklumat Keselamatan
Sentiasa patuhi langkah berjaga-jaga keselamatan berikut semasa pemasangan dan operasi:
- Disconnect the vehicle's battery negative terminal before beginning any electrical work to prevent short circuits.
- Pastikan semua pendawaian ditebat dan diikat dengan betul untuk mengelakkan kerosakan akibat getaran atau tepi tajam.
- Use appropriate gauge wiring for power and speaker connections to handle the speaker's power requirements.
- Elakkan memasang pembesar suara di lokasi yang menghalang ciri keselamatan kenderaan atau penglihatan pemandu.
- Do not expose the speaker to excessive moisture or extreme temperatures.
- Seek professional assistance if you are unsure about any installation steps.
3. Produk Lebihview
The DS18 PRO-X10M is a high-performance 10-inch midrange loudspeaker designed for clear and powerful audio reproduction. It features robust construction and optimized specifications for demanding audio environments.
Ciri-ciri Utama:
- Pengendalian Kuasa Tinggi: 300W RMS and 600W Max power handling for exceptional performance.
- Respons Frekuensi Luas: Ranges from 100Hz to 5KHz, ensuring accurate midrange and high frequencies.
- Sensitiviti Tinggi: 96dB sensitivity for loud, clear, and distortion-free sound.
- Pembinaan Tahan Lama: Built for longevity and consistent performance.
- Compact Mounting Depth: 3.77 inches (96mm) for flexible installation.
- Gegelung Suara: High efficiency 2-inch Kapton voice coil.
- Bahan Bakul: Oversized DS18 tooled steel basket in glossy red.
Apa yang ada di dalam Kotak:
- 1 x DS18 PRO-X10M Midrange Speaker
Imej 3.1: Depan view of the DS18 PRO-X10M 10-inch Midrange Loudspeaker.
Image 3.2: Visual representation of key specifications including 300W RMS, 600W MAX power, 8 Ohms impedance, 10-inch size, and non-pressed paper cone.
Image 3.3: Details on the high-efficiency 2-inch Kapton voice coil, 96dB sensitivity, and 100Hz-5KHz frequency response.
4. Persediaan dan Pemasangan
Careful installation is crucial for optimal sound quality and product longevity. Follow these guidelines for setting up your PRO-X10M loudspeaker.
Pemasangan:
- Choose a suitable mounting location, typically a door panel or custom enclosure, ensuring sufficient clearance behind the speaker.
- Measure and mark the cutout area. The recommended front mount baffle cutout diameter is 9.05 inches (230mm).
- Cut the opening carefully, ensuring a clean edge.
- Gerudi lubang pandu untuk skru pelekap.
- Position the speaker and secure it with appropriate screws, ensuring not to overtighten.
Pendawaian:
- Connect the positive (+) terminal of the speaker to the positive (+) output of your amplebih hidup.
- Connect the negative (-) terminal of the speaker to the negative (-) output of your amplebih hidup.
- Pastikan semua sambungan selamat dan bebas daripada kakisan.
- Verify the impedance of your amplifier matches the 8-Ohm impedance of the speaker, or that your amplifier is stable at the combined impedance if using multiple speakers.
Image 4.1: Detailed dimensions including overall diameter (10.07 inches / 256mm), mounting depth (3.78 inches / 96mm), and front mount baffle cutout (9.05 inches / 230mm).
Image 4.2: Illustration of the 3.77-inch mounting depth and the glossy red steel basket material.
5. Arahan Operasi
Once installed, follow these steps to operate your DS18 PRO-X10M loudspeaker:
- Sambung ke Amplebih hidup: Ensure the speaker is correctly wired to a compatible amplebih hidup.
- Hidupkan kuasa: Turn on your audio system and amplebih hidup.
- Tetapan Kelantangan Awal: Mulakan dengan amplifier's gain and head unit volume at their lowest settings.
- Laraskan Keuntungan: Meningkatkan secara beransur-ansur amplifier's gain until the desired volume is achieved without distortion. Avoid setting the gain too high, as this can damage the speaker.
- Tetapan Crossover: For optimal performance and protection, use a high-pass filter (HPF) on your amplifier or head unit. A recommended starting point for the HPF is around 120-150Hz, with a slope of 12dB or 24dB per octave, to prevent low frequencies from reaching the midrange speaker.
- Tempoh Pecah Masuk: Allow a break-in period of approximately 10-20 hours of moderate listening before operating at full power. This allows the speaker's suspension to loosen and perform optimally.
6. Penyelenggaraan
Regular maintenance helps preserve the performance and appearance of your loudspeaker.
- Pembersihan: Use a soft, dry cloth to gently wipe the speaker cone and surround. Avoid using harsh chemicals or abrasive cleaners.
- Pemeriksaan: Periodically check speaker terminals and wiring for secure connections and signs of corrosion or damage.
- Perlindungan Alam Sekitar: If installed in a vehicle, ensure the speaker is protected from direct sunlight, extreme temperatures, and moisture.
7. Penyelesaian masalah
If you encounter issues with your PRO-X10M loudspeaker, refer to the following common problems and solutions:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Tiada Bunyi | Pendawaian longgar atau salah; Amppenguat mati atau dalam mod perlindungan; Isu unit kepala. | Periksa semua sambungan pendawaian; Sahkan amplifier power and status; Test with another audio source. |
| Bunyi Herot | Amplifier gain too high; Incorrect crossover settings; Speaker over-powered or under-powered; Damaged speaker. | Kurangkan amplifier gain; Adjust crossover settings (HPF); Ensure amplifier power matches speaker RMS; Inspect speaker for physical damage. |
| Bunyi Lemah atau Terkedu | Incorrect polarity (out of phase); Insufficient power; Poor quality audio source. | Check speaker wiring for correct positive/negative connections; Ensure adequate power supply to amplifier; Use a high-quality audio source. |
| Bunyi Selang-seli | Loose connections; Damaged wiring; Ampliifier terlalu panas. | Secure all connections; Inspect wiring for breaks or shorts; Ensure proper ventilation for amplebih hidup. |
If the problem persists after attempting these solutions, please contact DS18 customer support.
8. Spesifikasi
Detailed technical specifications for the DS18 PRO-X10M 10-Inch Midrange Loudspeaker:
| Spesifikasi | Nilai |
|---|---|
| Nama Model | PRO-X10M |
| Jenis Pembesar Suara | Julat pertengahan |
| Saiz Pembesar Suara | 10 Inci |
| Impedans | 8 Ohm |
| Kuasa RMS | 300 Watt |
| Kuasa Output Maksimum | 600 Watt |
| Respons Kekerapan | 100Hz - 5KHz |
| Signal-to-Noise Ratio (Sensitivity) | 96 dB |
| Kedalaman Pemasangan | 3.78 inci (96mm) |
| Diameter Keseluruhan | 10.07 inci (256mm) |
| Potongan Penyekat Pelekap Depan | 9.05 inci (230mm) |
| Gegelung Suara | 2-inch Kapton |
| bahan | Ferrite Magnet, Steel Basket |
| warna | Classic (Red Basket) |
| Berat Barang | 2.99 paun (1.36 Kilogram) |
| UPC | 663593055774 |
9. Maklumat Waranti
The DS18 PRO-X10M loudspeaker comes with a Waranti Terhad. Please refer to the official DS18 website or your purchase documentation for specific terms, conditions, and duration of the warranty. This warranty typically covers manufacturing defects and material flaws under normal use. Damage resulting from improper installation, abuse, accident, or unauthorized modifications is generally not covered.
10. Sokongan
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact DS18 customer support:
- Webtapak: Lawati pegawai DS18 webtapak untuk maklumat produk, Soalan Lazim dan sumber sokongan.
- Hubungi: Refer to the 'Contact Us' section on the DS18 weblaman web untuk nombor telefon atau sokongan e-mel.
When contacting support, please have your product model number (PRO-X10M) and proof of purchase readily available.
