pengenalan
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Primo Bottom Load Water Dispenser, Model 900130. Please read all instructions carefully before use and retain this manual for future reference.
Maklumat Keselamatan Penting
- Always unplug the dispenser before cleaning or performing any maintenance.
- Do not operate the dispenser with a damaged cord or plug.
- Jauhkan dispenser daripada cahaya matahari langsung dan sumber haba.
- Ensure the dispenser is placed on a level, stable surface.
- This appliance is intended for dispensing potable water only.
- Jangan rendam dispenser, kord atau palam dalam air atau cecair lain.
Produk Selesaiview
The Primo Bottom Load Water Dispenser provides convenient access to hot, cold, and room temperature water. Its bottom-loading design eliminates the need for lifting heavy water bottles.
Imej: Depan view of the Primo Bottom Load Water Dispenser in stainless steel and black finish. The top section is black with the 'PRIMO' logo and indicator lights. Below that are three spouts for water dispensing. The lower section is stainless steel, housing the water bottle compartment.
Persediaan
- Membongkar: Carefully remove the dispenser from its packaging. Retain packaging for future transport if needed.
- penempatan: Place the dispenser on a hard, level surface at least 4 inches away from a wall to allow for proper ventilation. Ensure it is not in direct sunlight or near heat sources.
- Pembersihan Awal: Before first use, clean the drip tray and wipe down the exterior with a damp kain.
- Pemasangan Botol Air:
- Buka pintu kabinet bawah.
- Insert the probe assembly into a fresh 3 or 5-gallon water bottle. Ensure the probe is fully inserted and the cap is secure.
- Slide the water bottle into the lower cabinet.
- Tutup pintu kabinet.
- Penyebuan: Before plugging in, dispense water from the cold and hot spouts until water flows steadily. This removes air from the lines.
- Sambungan Kuasa: Plug the dispenser into a grounded 110-120V AC outlet.
Arahan Operasi
- Hidupkan kuasa: Once plugged in, the indicator lights will illuminate. The dispenser will begin cooling and heating water.
- Pemberian Air Panas: To dispense hot water, press the safety button (if applicable) and then press the hot water lever/button. Use caution as water is hot.
- Pengeluaran Air Sejuk: Press the cold water lever/button to dispense chilled water.
- Room Temperature Water Dispensing: Press the room temperature water lever/button to dispense water at ambient temperature.
- Bottle Empty Indicator: The dispenser will have an indicator light to signal when the water bottle is empty and needs replacement.
Penyelenggaraan
- Pembersihan Luaran: Lap permukaan luar dengan lembut, damp cloth regularly. Do not use abrasive cleaners.
- Pembersihan Dulang Titisan: The drip tray should be emptied and cleaned regularly to prevent overflow and bacterial growth. Remove the tray, empty water, wash with mild soap and water, rinse, and dry thoroughly before replacing.
- Pembersihan Gegelung Kondenser: Periodically clean the condenser coils at the back of the dispenser with a vacuum cleaner or brush to ensure efficient operation. Ensure the unit is unplugged.
- Internal Cleaning/Sanitizing: Refer to the full user manual for detailed instructions on sanitizing the internal water tanks and lines. This typically involves using a food-grade sanitizing solution.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Tiada pendispensan air | Water bottle empty or not properly installed; Air lock in lines; Dispenser unplugged. | Replace water bottle; Re-insert probe; Prime the dispenser; Check power connection. |
| Air tidak cukup panas/sejuk | Dispenser recently plugged in; Hot/cold switch off; Poor ventilation. | Allow 15-30 minutes for temperature stabilization; Ensure switches are on; Clear space around dispenser. |
| Bocor | Water bottle cracked; Drip tray full or misaligned; Loose connections. | Replace water bottle; Empty and properly seat drip tray; Contact customer support if issue persists. |
Spesifikasi
- model: 900130
- warna: Keluli Tahan Karat/Hitam
- Bahan: Keluli Tahan Karat
- gaya: Beban Bawah
- Sumber Kuasa: Dipasangkan
- Penilaian Suhu Atas: Kira-kira 190°F (88°C)
- Jenis Pemasangan: Freestanding (Note: While listed as 'Under Sink' in some specifications, this model is a freestanding unit.)
Waranti dan Sokongan
Primo products are backed by a limited warranty. For specific warranty details, registration, or technical support, please refer to the warranty card included with your product or visit the official Primo webtapak. Simpan bukti pembelian anda untuk tuntutan waranti.
For further assistance, you may contact Primo customer service through their official channels.
