Progress Lighting Helm Collection One-Light 11" LED Flush Mount Instruction Manual

pengenalan

The Progress Lighting Helm Collection One-Light 11" LED Flush Mount fixture is a contemporary lighting solution designed for both ceiling and wall mounting. Featuring an acrylic diffuser with architectural details, this fixture provides efficient and stylish illumination. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new light fixture.

Maklumat Keselamatan Penting

Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries that could be fatal or cause serious damage. All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). If you are unfamiliar with electrical wiring, consult a qualified electrician.

• Sentiasa putuskan sambungan kuasa pada pemutus litar utama sebelum pemasangan atau penyelenggaraan.
• Jangan pasang lekapan ini di lokasi yang basah. Ia direka bentuk untuk kegunaan dalaman sahaja.
• Pastikan semua sambungan selamat dan terlindung dengan betul.
• This fixture is designed for 120 Volts AC.
• Jangan cuba mengubah suai lekapan. Sebarang pengubahsuaian boleh membatalkan waranti dan menimbulkan bahaya keselamatan.
• Sumber cahaya LED disepadukan dan tidak boleh diganti oleh pengguna.

Kandungan Pakej

Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:

• Helm Collection LED Flush Mount Fixture (1)
• Kit Perkakasan Pemasangan (1)
• Helaian Pemasangan (1)

Persediaan dan Pemasangan

Follow these steps carefully to install your new fixture. It is recommended to have two people for installation.

Langkah 1: Sediakan untuk Pemasangan

1. Matikan kuasa pada pemutus litar atau kotak fius untuk mengelakkan renjatan elektrik.
2. Remove the old fixture (if applicable) and disconnect all wiring.
3. Unpack the new fixture and its components. Keep all parts organized.

Langkah 2: Pasang Lekapan

Imej: Depan view of the 11-inch LED flush mount fixture in a brushed nickel finish, showcasing its square design and acrylic diffuser.

Image: Diagram showing the dimensions of the fixture, indicating an 11-inch width and 3-3/4 inch height.

4. Pasangkan pendakap pelekap pada kotak simpang menggunakan skru yang disediakan. Pastikan ia dipasang dengan kukuh.
5. Connect the fixture's wires to the corresponding house wires:
   • Sambungkan wayar hitam (Live) dari lekapan ke wayar hitam dari kotak simpang.
   • Sambungkan wayar putih (Neutral) dari lekapan ke wayar putih dari kotak simpang.
   • Connect the green or bare copper wire (Ground) from the fixture to the green or bare copper wire from the junction box.
   Use wire nuts to secure all connections and wrap them with electrical tape for added safety.
6. Berhati-hati masukkan semua wayar ke dalam kotak simpang.
7. Align the fixture with the mounting bracket and secure it using the provided screws. Ensure the fixture is flush against the ceiling or wall.

Langkah 3: Selesaikan Pemasangan

8. Pulihkan kuasa pada pemutus litar utama.
9. Uji lekapan untuk memastikan ia berfungsi dengan betul.

Arahan Operasi

This LED flush mount fixture is designed for simple operation.

• Menghidupkan/Mematikan: Use a standard wall switch connected to the fixture's circuit to turn the light on or off.
• Peredupan: This fixture is compatible with most standard dimmer switches. For optimal performance and to avoid flickering, use an LED-compatible dimmer switch. Consult your dimmer switch manufacturer's instructions for proper installation and operation.

Penyelenggaraan

Untuk memastikan jangka hayat dan penampilan lekapan anda, ikut garis panduan penyelenggaraan ini:

• Pembersihan: Always turn off the power and allow the fixture to cool before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or acrylic diffuser.
• Sumber Lampu LED: The LED light source in this fixture is integrated and designed for long-term use. It is not user-replaceable. If the LED light source fails, the entire fixture may need to be replaced.
• Pemeriksaan: Periodically inspect the fixture for any loose connections or signs of wear. If any issues are found, disconnect power and consult a qualified electrician.

Menyelesaikan masalah

If you experience issues with your fixture, refer to the following common problems and solutions:

If the problem persists after trying these solutions, contact Progress Lighting customer support or a qualified electrician.

Spesifikasi

Waranti dan Sokongan

Lekapan Lampu Progress ini dilengkapi dengan Waranti Terhad 5 tahun. This warranty guarantees your complete satisfaction with your purchase and includes professional after-sales customer service support.

For warranty claims, technical assistance, or any questions regarding your product, please contact Progress Lighting customer service.

Anda juga boleh melawat pegawai tersebut Kedai Pencahayaan Progress di Amazon untuk maklumat lanjut dan penawaran produk.