Manual Pengguna Terminal Berbilang Lorong Verifone MX915

1. Pengenalan

This manual provides essential information for the safe and efficient operation of your Verifone MX915 Multi Lane Terminal. Please read this manual thoroughly before using the device and retain it for future reference.

The Verifone MX915 is a PCI 3.X compliant terminal designed for multi-lane retail environments, featuring a secure chip card reader (SC), touch screen (TCH), Ethernet connectivity, and contactless payment capabilities (CTLS).

2. Maklumat Keselamatan

• Do not expose the terminal to extreme temperatures, humidity, or direct sunlight.
• Elakkan daripada menjatuhkan atau menyebabkan peranti ini mengalami hentaman yang teruk.
• Only use accessories and power supplies approved by Verifone.
• Do not attempt to open or modify the terminal. This will void the warranty and could compromise security.
• Pastikan pengudaraan yang betul di sekeliling peranti semasa operasi.
• Putuskan sambungan kuasa sebelum membersihkan.

3. Kandungan Pakej

Carefully unpack the box and verify that all items listed below are present and undamaged. If any items are missing or damaged, contact your supplier immediately.

• Verifone MX915 Multi Lane Terminal
• Stylus
• Mounting Bracket (optional, may vary by package)
• Cables (Ethernet, USB, etc. - Note: Power supply and certain cables may not be included and must be acquired separately.)

Rajah 3.1: Contents of the Verifone MX915 package, including the terminal, stylus, various cables, and a mounting bracket. Please note that specific accessories may vary.

Rajah 3.2: jarak dekat view of the mounting bracket and additional cables that may be included or required for the Verifone MX915 terminal setup.

4. Persediaan

4.1 Connecting the Terminal

1. Connect I/O Module: The Verifone MX915 requires an I/O module for connectivity. Connect the appropriate cable from the terminal to the I/O module.
2. Sambungkan Kuasa: Connect the power supply (not included) to the I/O module, then plug the power supply into a suitable electrical outlet.
3. Sambungkan Rangkaian: For Ethernet connectivity, connect an Ethernet cable from your network router or switch to the RJ-45 port on the I/O module.
4. Secure Mounting (Optional): If using a mounting bracket, securely attach the terminal to the bracket according to the bracket's instructions.

Rajah 4.1: Depan view of the Verifone MX915 terminal, showing the display screen, integrated keypad, and stylus.

4.2 But Awal

Once power is connected, the terminal will automatically begin its boot-up sequence. This process may take a few moments. The display will show the Verifone logo and system information as it initializes.

Rajah 4.2: The Verifone MX915 display during initial boot-up, showing the Verifone branding and indicating its Linux-based operating system.

Note: Key injection is required to accept debit or credit card payments. This process is typically performed by your payment processor or a certified technician.

5. Arahan Operasi

The Verifone MX915 operates primarily through its touch screen and integrated keypad. Specific transaction flows will depend on the payment application loaded onto the device by your payment processor.

5.1 Menggunakan Skrin Sentuh

• Use your finger or the provided stylus to interact with the touch screen.
• Tap to select options or buttons.
• Follow on-screen prompts for transaction processing.

5.2 Menggunakan Pad Kekunci

• The keypad is used for entering PINs, amounts, or other numerical data.
• The green button typically confirms an entry.
• The red button typically cancels an entry or transaction.
• The yellow button typically corrects the last entered digit.

5.3 Accepting Payments

• Chip Card (EMV): Insert the chip card into the slot at the bottom of the terminal with the chip facing up. Leave the card in until prompted to remove it.
• Tanpa Sentuh (NFC): Tap the contactless card or mobile device near the contactless logo on the terminal's display. Wait for the confirmation beep or visual cue.
• Jalur Magnetik: Swipe the card through the magnetic stripe reader on the side of the terminal.

6. Penyelenggaraan

6.1 Cleaning the Terminal

• Disconnect the terminal from power before cleaning.
• Gunakan kain lembut dan tidak berbulu sedikit dampdisapu dengan air atau pembersih yang lembut dan tidak melelas.
• Do not spray cleaners directly onto the terminal.
• Avoid using solvents, harsh chemicals, or abrasive materials.
• Clean the screen and keypad regularly to ensure optimal performance and hygiene.

6.2 Kemas Kini Perisian

Software updates are typically managed by your payment processor or IT department. Do not attempt to update the firmware or software independently unless instructed by a certified professional.

7. Penyelesaian masalah

For issues not listed here, or if solutions do not resolve the problem, please contact your technical support provider.

8. Spesifikasi

Rajah 8.1: Product label on the back of the Verifone MX915, displaying model information, PCI compliance details, FCC ID, and manufacturing origin.

9. Waranti dan Sokongan

9.1 Maklumat Waranti

Verifone products typically come with a limited manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official Verifone webtapak untuk terma dan syarat jaminan terperinci. Simpan bukti pembelian anda untuk tuntutan waranti.

9.2 Sokongan Teknikal

For technical assistance, troubleshooting beyond this manual, or service requests, please contact your payment processor or the authorized Verifone reseller from whom you purchased the device. They are equipped to provide specific support for your terminal's configuration and payment application.

You may also visit the official Verifone support portal for general product information and resources: www.verifone.com/support