Defiant 180-Degree 1-Head Outdoor Black LED Battery Power Flood Light User Manual

1. Maklumat Keselamatan Penting

Please read and understand all instructions before attempting to assemble, operate, or install the product. Failure to follow these instructions may result in electric shock, fire, or other injuries that could be hazardous or fatal.

• Ensure the mounting surface is sturdy and can support the weight of the light fixture.
• Jangan campurkan bateri lama dan baru. Jangan campurkan bateri beralkali, standard (karbon-zink), atau boleh dicas semula (nikel-kadmium).
• Buang bateri dengan betul mengikut peraturan tempatan.
• This product is designed for outdoor wall mount applications only.
• Do not look directly into the LED light source when the light is on.

2. Produk Lebihview

The Defiant 180-Degree 1-Head Outdoor Black LED Battery Power Flood Light is a battery-operated motion-activated security light designed for outdoor use. It provides 200 lumens of light output, making it suitable for illuminating sheds, fences, and other outdoor areas without the need for electrical wiring. The integrated LED technology ensures long-lasting performance without bulb replacement.

Rajah 2.1: Depan view of the Defiant LED Battery Power Flood Light, showcasing its single LED head and motion sensor.

Ciri-ciri Utama:

• Dikuasakan Bateri: No wiring required for installation.
• Keluaran 200 Lumen: Provides bright illumination for outdoor spaces.
• Gerakan Diaktifkan: Dihidupkan secara automatik apabila gerakan dikesan.
• Tetapan Boleh Laras: Features adjustable on-time, lux level (day/night operation), and motion detection range.
• Teknologi LED: Integrated LED bulbs eliminate the need for bulb replacement.
• Tool-less Lamp Pelarasan Kepala: Easily adjust the direction of the light.
• Pemasangan Dinding Sahaja: Designed specifically for wall installation.

3. Persediaan dan Pemasangan

Installation of the Defiant LED Flood Light is designed to be straightforward, requiring only three easy steps. This light is intended for wall mount applications only.

3.1. Pemasangan Bateri

The light requires three (3) "C" batteries (not included). To install the batteries:

1. Locate the battery compartment on the back or bottom of the unit.
2. Buka penutup petak bateri.
3. Insert three "C" batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
4. Tutup penutup petak bateri dengan selamat.

3.2. Memasang Cahaya

Choose a suitable outdoor wall location for mounting. Ensure the area is clear and the motion sensor will have an unobstructed view of the desired detection zone.

Figure 3.1: Product packaging highlighting key features and suggesting easy installation steps.

1. Using the mounting holes on the light fixture as a template, mark the desired drill points on the wall.
2. Drill pilot holes if necessary, depending on the wall material.
3. Secure the light fixture to the wall using appropriate screws and anchors (not included).

4. Arahan Operasi

The Defiant LED Flood Light features adjustable settings to customize its operation based on your needs.

4.1. Melaraskan Tetapan

Locate the adjustment dials, typically found on the underside or side of the motion sensor unit. These dials allow you to control:

• Tepati Masa: Adjusts how long the light stays on after motion is detected and stops. The light can be set to stay on for approximately 10 seconds after all motion ceases.
• Lux Level (Day/Night Sensor): Determines the ambient light level at which the motion sensor becomes active. Set to operate only at night, or during both day and night.
• Julat: Controls the sensitivity and detection distance of the motion sensor.

4.2. Lamp Pelarasan Kepala

Lamp head can be adjusted without tools. Simply grasp the light head and pivot it to direct the light beam to your desired area.

5. Penyelenggaraan

Penyelenggaraan berkala memastikan prestasi optimum dan jangka hayat lampu limpah anda.

5.1. Penggantian Bateri

When the light output diminishes or the light stops functioning, it is time to replace the batteries. Follow the steps in Section 3.1 for battery installation, ensuring to replace all three "C" batteries with new ones.

5.2. Pembersihan

To clean the light fixture, wipe it with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or electronic components. Ensure the motion sensor lens is clean for optimal detection.

6. Penyelesaian masalah

If your flood light is not operating as expected, refer to the following common issues and solutions:

7. Spesifikasi

8. Waranti dan Sokongan

Untuk maklumat mengenai jaminan produk, sokongan teknikal atau alat ganti, sila rujuk kepada pegawai pengilang weblaman web atau hubungi jabatan khidmat pelanggan mereka. Butiran hubungan biasanya diberikan pada pembungkusan produk atau pengilang webtapak.

Note: Keep your purchase receipt for warranty claims.