Pemasa Mekanikal Pasang Masuk 24 Jam BN-LINK

1. Pengenalan

The BN-LINK 24-Hour Plug-in Mechanical Timer (Model FD-60-U1) is designed to automate the operation of various electrical devices by turning them ON and OFF at pre-set times. This grounded timer offers convenience and energy savings for a wide range of indoor applications.

Imej 1: Pemasa Mekanikal Pasang Masuk 24 Jam BN-LINK, hadapan view.

2. Maklumat Keselamatan

• Untuk kegunaan dalaman sahaja.
• Do not exceed electrical ratings: 125VAC, 60 Hz, 1875W, 15A Resistive, 8A Tungsten, 1/2HP.
• Ensure the timer is securely plugged into a grounded electrical outlet.
• Jangan rendam dalam air atau gunakan dalam keadaan basah.
• Cabut palam pemasa sebelum membersihkan.
• Jauhkan daripada kanak-kanak.

3. Produk Lebihview

Image 2: Labeled diagram of the timer's components.

• Dail Jam: Displays 24-hour time.
• anak panah: Menunjukkan masa semasa.
• Pin Tekan: Small segments around the dial. Each pin represents 15 minutes. Pushed down = ON, Pulled up = OFF.
• Suis Slaid: Allows selection between 'ON' (always on) and 'TIMER' (follows programmed schedule).
• Output Indicating Light: Illuminates when the connected device is receiving power.
• Outlet Dibumikan: Where the appliance is plugged in.

4. Persediaan

1. Prepare Pins: Ensure all push pins around the clock dial are in the UP (OFF) position before programming.
2. Tetapkan Masa Semasa: Rotate the clock dial clockwise until the white arrow aligns with the current time of day. The dial uses a 24-hour format (e.g., 13 for 1 PM, 18 for 6 PM).
3. Pasangkan: Insert the timer into a grounded 3-prong electrical outlet.

5. Arahan Operasi

Image 3: Pins pushed down activate the device; pins pulled up deactivate it.

1. Waktu Program HIDUP/MATI: Push down the pins corresponding to the desired ON time. Each pushed-down pin represents 15 minutes of ON time. Leave pins in the UP position for desired OFF times. You can set up to 96 ON/OFF programs per day.
2. Sambungkan Peranti: Plug your electrical appliance into the grounded outlet on the timer.
3. Pilih Mod: Slide the red switch on the side of the timer to the 'TIMER' position for automatic operation based on your programmed schedule. To keep the device continuously ON, slide the switch to the 'ON' position.
4. The timer will automatically cycle through your programmed settings daily. The red output indicating light will illuminate when the device is ON.

6. Aplikasi

This versatile mechanical timer can be used to automate various devices and systems:

• Aquariums and Terrariums (lighting, pumps)
• Grow Lights for Hydroponics and Indoor Plants
• Indoor Lighting (lamps, holiday decorations)
• Small Home Appliances (coffee makers, fans, humidifiers)
• Security Lighting (to simulate occupancy)

Imej 4: Cthamples of timer applications including humidifiers, lamps, fans, grow lights, aquariums, and coffee machines.

7. Spesifikasi

Image 5: Product dimensions and electrical ratings.

8. Penyelesaian masalah

• Peranti tidak HIDUP/MATI:
  • Pastikan pemasa dipasang dengan selamat ke soket hidup.
  • Sahkan perkakas dipasang dengan betul ke pemasa.
  • Check that the side switch is set to 'TIMER' mode.
  • Confirm that the push pins for the desired ON/OFF times are correctly set (down for ON, up for OFF).
  • Ensure the current time arrow is aligned with the actual time on the dial.
• Timer not advancing:
  • The timer's motor may be stuck. Gently rotate the dial to see if it frees up.
  • Ensure the timer is receiving power.
• Loud ticking noise:
  • Mechanical timers typically produce a soft ticking sound. If the noise is excessively loud or unusual, discontinue use and contact customer support.

9. Waranti dan Sokongan

For warranty information, technical support, or any questions regarding your BN-LINK Mechanical Timer, please refer to the contact information provided with your product packaging or visit the official BN-LINK webtapak.

Always ensure to follow all safety guidelines and operating instructions to prevent damage or injury.