Bixolon SRP-350IIICOSG Thermal Receipt Printer User Manual

1. Pengenalan

This manual provides essential instructions for the safe and efficient use of your Bixolon SRP-350IIICOSG Thermal Receipt Printer. Please read this manual thoroughly before operating the printer and retain it for future reference. This printer is designed for point-of-sale (POS) receipt printing applications.

2. Maklumat Keselamatan

• Bekalan Kuasa: Use only the power supply provided with the printer. Using an incorrect power supply may damage the printer and void the warranty.
• penempatan: Place the printer on a stable, level surface. Avoid locations with excessive dust, humidity, or direct sunlight.
• Pengudaraan: Ensure adequate ventilation around the printer to prevent overheating. Do not block ventilation openings.
• Sentuhan Cecair: Keep the printer away from liquids. In case of accidental liquid spillage, immediately disconnect the power and contact qualified service personnel.
• Bahagian bergerak: Keep hands and foreign objects away from the paper cutter and other moving parts during operation.

3. Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej:

• Bixolon SRP-350IIICOSG Thermal Receipt Printer
• Bekalan Kuasa
• Kord Kuasa
• Starter Paper Roll
• Manual Pengguna (dokumen ini)

4. Persediaan

4.1 Membongkar dan Meletakkan

Carefully remove the printer from its packaging. Place the printer on a flat, stable surface near your computer or POS system.

4.2 Menyambungkan Bekalan Kuasa

1. Sambungkan kord kuasa ke bekalan kuasa.
2. Plug the power supply connector into the power port on the back of the printer.
3. Palamkan kord kuasa ke salur keluar elektrik yang dibumikan.

4.3 Menyambungkan Kabel Data

The SRP-350IIICOSG printer supports Serial and USB interfaces.

Rajah 4.3.1: Belakang view of the Bixolon SRP-350IIICOSG printer, illustrating the various connection ports including power, USB, serial, and Ethernet.

• Sambungan USB: Connect one end of a USB cable (Type B) to the USB port on the printer and the other end to an available USB port on your computer or POS system.
• Sambungan Bersiri: Connect one end of a serial cable (DB9) to the serial port on the printer and the other end to an available serial port on your computer or POS system.

4.4 Loading the Paper Roll

1. Open the printer cover by pushing the cover open lever.
2. Insert the new paper roll into the paper compartment with the paper feeding from the bottom.
3. Tarik sedikit kertas keluar melepasi pemotong.
4. Tutup penutup pencetak dengan kuat sehingga ia berbunyi klik pada tempatnya.

Rajah 4.4.1: Bahagian hadapan view of the Bixolon SRP-350IIICOSG printer, showing a paper roll correctly loaded and ready for printing.

4.5 Pemasangan Pemandu

Before using the printer, you must install the appropriate drivers on your computer or POS system. Drivers are typically available on the Bixolon official website. Follow the instructions provided with the driver package for installation.

5. Mengendalikan Pencetak

5.1 Menghidupkan/Mematikan

To power on the printer, press the power switch located on the side or back of the printer to the 'ON' position. To power off, press the switch to the 'OFF' position.

5.2 Petunjuk Status

The printer features LED indicators to show its current status:

• LED kuasa: Illuminates when the printer is powered on.
• LED ralat: Flashes or illuminates to indicate an error condition (e.g., paper out, cover open, cutter error). Refer to the troubleshooting section for details.
• Paper LED: Illuminates when the paper roll is low or out.

5.3 Mencetak Halaman Ujian

To print a self-test page:

1. Ensure the printer is powered off and paper is loaded.
2. Hold down the FEED button.
3. While holding the FEED button, turn on the printer.
4. Release the FEED button once the printer starts printing.

The printer will print a test page showing its current settings and status.

6. Penyelenggaraan

6.1 Membersihkan Kepala Cetak

Regular cleaning of the print head ensures optimal print quality and extends printer life. Clean the print head using an alcohol swab or a specialized print head cleaning pen.

1. Matikan pencetak dan cabut kord kuasa.
2. Buka penutup pencetak.
3. Gently wipe the thermal elements of the print head with the cleaning tool.
4. Benarkan kepala cetakan kering sepenuhnya sebelum menutup penutup dan menyambung semula kuasa.

6.2 Replacing the Paper Roll

When the paper roll is depleted, the paper out LED will illuminate. Follow the steps in Section 4.4 to replace the paper roll.

6.3 Cleaning the Auto Cutter

If the auto cutter experiences frequent jams or malfunctions, it may require cleaning. Use a soft brush or compressed air to remove paper dust and debris from the cutter mechanism.

7. Penyelesaian masalah

Bahagian ini menangani isu biasa yang mungkin anda hadapi dengan pencetak anda.

8. Spesifikasi

Key technical specifications for the Bixolon SRP-350IIICOSG Thermal Receipt Printer:

9. Waranti dan Sokongan

For warranty information and technical support, please refer to the warranty card included with your product or visit the official Bixolon webtapak. Anda boleh mencari pemandu, Soalan Lazim dan maklumat hubungan untuk perkhidmatan pelanggan di sana.

Bixolon Official Webtapak: www.bixolon.com