URMET 1745/21

URMET Synthesi CCD + MHP 1T Video Module 1745/21 Instruction Manual

Model: 1745/21

pengenalan

This manual provides detailed instructions for the installation, operation, and maintenance of the URMET Synthesi CCD + MHP 1T Video Module, model 1745/21. This video module is designed for 4+N cable systems and features an integrated micro-HP amplifier, two call buttons, manual adjustment capabilities, and infrared illumination for enhanced visibility.

Produk Selesaiview

URMET Synthesi Video Module in original packaging

Rajah 1: URMET Synthesi Video Module 1745/21 as supplied in its original packaging, showing the front panel design.

URMET Synthesi Video Module with included accessories and documentation

Rajah 2: Contents of the URMET Synthesi Video Module package, including the module, wiring accessories, and instruction leaflets.

Persediaan dan Pemasangan

The URMET Synthesi 1745/21 video module is designed for 5-wire installations without the need for a coaxial cable. Proper installation is crucial for optimal performance. It is recommended that installation be performed by a qualified technician.

Pengenalan Komponen

Depan view of URMET Synthesi Video Module showing camera, infrared LEDs, and call buttons

Rajah 3: Front panel of the video module, highlighting the CCD camera lens, infrared illumination LEDs, microphone/speaker grille, and two call buttons.

belakang view of URMET Synthesi Video Module showing wiring terminals and adjustment potentiometers

Rajah 4: belakang view of the video module, displaying the terminal block for wiring connections and potentiometers for manual adjustments (e.g., audio levels, camera focus).

Arahan Pendawaian

Connect the module using a 4+N cable system. Refer to the detailed wiring diagram provided in the separate installation guide (typically included with the product or available from URMET). Ensure all connections are secure and correctly polarized. The module integrates a micro-HP amplifier, simplifying audio connections.

Melekap

Mount the module securely in the designated Synthesi frame. Ensure it is protected from direct weather exposure if installed outdoors, or use an appropriate weather-resistant housing.

Arahan Operasi

The URMET Synthesi 1745/21 video module provides visual and audio communication for your intercom system.

Membuat Panggilan

Press one of the two call buttons on the front panel (refer to Figure 3) to initiate a call to the corresponding indoor unit. The integrated micro-HP amplifier ensures clear audio transmission.

Video and Audio Communication

Once a call is established, the CCD camera provides video feed to the indoor monitor. The integrated microphone and speaker facilitate two-way audio communication. Infrared illumination automatically activates in low-light conditions to ensure clear video even at night.

Pelarasan

The module features manual adjustment options, typically accessible via potentiometers on the rear (refer to Figure 4). These adjustments may include camera focus, video brightness, and audio volume levels. Consult the detailed wiring and adjustment guide for specific procedures.

Penyelenggaraan

Regular maintenance ensures the longevity and optimal performance of your URMET Synthesi video module.

Pembersihan

  • Gently wipe the front panel, especially the camera lens and infrared LEDs, with a soft, damp kain.
  • Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the surface or optical components.
  • Ensure no moisture enters the module's internal components.

Pemeriksaan

  • Periksa semua sambungan pendawaian secara berkala untuk memastikan ia ketat dan terdapat tanda-tanda kakisan.
  • Ensure the module is securely mounted and that its housing is intact.

Menyelesaikan masalah

If you encounter issues with your URMET Synthesi video module, refer to the following common problems and solutions:

MasalahKemungkinan PuncaPenyelesaian
No video on indoor monitor
  • Loose video wiring connection.
  • Bekalan kuasa tidak mencukupi.
  • Camera fault.
  • Check all video signal wires for secure connections.
  • Verify power supply to the module and system.
  • Contact URMET support if wiring and power are confirmed good.
Tiada audio atau kualiti audio yang lemah
  • Loose audio wiring connection.
  • Microphone or speaker obstruction.
  • Audio level adjustment.
  • Check audio wiring.
  • Ensure microphone and speaker grilles are clear of debris.
  • Adjust audio potentiometers on the rear of the module (Figure 4).
Call buttons not responding
  • Incorrect wiring for call buttons.
  • Kerosakan butang.
  • Verify call button wiring according to the installation diagram.
  • If wiring is correct, the button may require replacement.
Kualiti imej yang teruk pada waktu malam
  • Infrared LEDs obstructed or faulty.
  • Camera lens dirty.
  • Bersihkan kanta kamera dan LED inframerah.
  • Ensure no physical obstructions are blocking the LEDs.

For issues not listed here or if troubleshooting steps do not resolve the problem, please contact URMET technical support.

Spesifikasi

CiriPerincian
PengeluarURMET
Nombor Bahagian1745/21
Dimensi Produk0.03 x 0.03 x 0.03cm; 9.07g
ASINB00LPDRU7M
Bateri DiperlukanTidak
Tarikh Tersedia Pertama21 Februari 2020
Keserasian Sistem4+N Cable System, 5-wire installation (no coaxial cable)
Ciri-ciriIntegrated micro-HP amplifier, 2 call buttons, manual adjustment, infrared illumination

Waranti dan Sokongan

For warranty information, please refer to the documentation provided with your purchase or contact URMET directly. URMET provides technical support for their products.

For technical assistance, spare parts, or further inquiries, please visit the official URMET website or contact their customer service department. Ensure you have your product model number (1745/21) and purchase details available when seeking support.

Dokumen Berkaitan - 1745/21

Praview Urmet Signo 1740: 4" Video Intercom Monitor Installation Guide
This guide provides installation instructions for the Urmet Signo 1740, a 4" video intercom monitor. It details how to replace older Urmet models and outlines the necessary system requirements, including the use of a CCD camera and a relay-based power supply for electric locks.
Praview Installationshandbuch für URMET Namensverzeichnismodul Mod. 1168/51
Umfassendes Installationshandbuch für das URMET Namensverzeichnismodul (Modell 1168/51 und 1168/51G) für Alpha-Rufmodule. Enthält technische Spezifikationen, Anschlussdiagramme und Wartungshinweise.
Praview ZJEDNODUŠENÝ NÁVOD: ZAPOJENÍ SYSTÉMU URMET 1736
Zjednodušený návod pro zapojení a konfiguraci systémů videovrátných a audio vrátných URMET řady 1736. Obsahuje základní schéma zapojení soupravy 1736/501, paralelní zapojení více videotelefonů a příklad rozšíření systému s více tlačítky a byty. Podrobné informace o nastavení DIP přepínačů pro různé konfigurace.
Praview Urmet 7" Video Door Phone Gesture Commands Quick Guide
Quick guide to using gesture commands for the Urmet 7" Video Door Phone (Mod. 1760 series). Learn how to control functions like answering calls, opening doors, and ending calls using touchless gestures.
Praview Sistem Interkom Video Dua Wayar Urmet 1744/501 dengan Monitor 7 inci - Panduan Pemasangan
Detailed installation guide for the Urmet 1744/501 two-wire video intercom system. Covers component descriptions, mounting instructions, wiring diagrams, technical specifications, and system functions for the 7-inch monitor and outdoor call panel.
Praview Manual del Sistema Urmet 2Voice: Instalación y Operación
Guía completa del sistema de videoportero Urmet 2Voice, cubriendo instalación, configuración, características y funcionamiento. Aprenda a configurar y gestionar el sistema de comunicación de su edificio.