1. Produk Lebihview
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting P6064-31 1-Light Wall Lantern. This fixture features an oval form factor with a grid overlay and etched glass shades, finished in black. It is designed for both outdoor and suitable indoor applications.
Rajah 1: Depan view of the Progress Lighting P6064-31 Wall Lantern.
2. Maklumat Keselamatan
AMARAN: To avoid electric shock, ensure power is turned off at the circuit breaker or fuse box before installation or servicing. All wiring must be in accordance with national and local electrical codes. If you are unsure about wiring, consult a qualified electrician.
- Jangan melebihi wat maksimumtage dinyatakan untuk mentol.
- Kendalikan komponen kaca dengan berhati-hati untuk mengelakkan pecah.
- Jauhkan bahan mudah terbakar dari lekapan lampu.
3. Kandungan Pakej
Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:
- Wall Lantern Fixture (P6064-31)
- Etched Glass Shade
- Kit Perkakasan Pemasangan
- Lembaran Pemasangan
4. Spesifikasi
| Ciri | Perincian |
|---|---|
| Nombor Model | P6064-31 |
| Jenama | Pencahayaan Kemajuan |
| Jenis Selesai | Finished (Black) |
| Dimensi Produk | 16.13"L x 9.25"W x 6.13"H |
| Berat Barang | 4.63 paun |
| Jenis Pemasangan | Menonjol |
| Tahap Ketahanan Air | Tahan Air |
| Sumber Cahaya Wattage | 100 Watt (Maksimum) |
| Voltage | 120 Volt |
| Output Cahaya Maksimum | 1600 Lumen |
| Jenis Sumber Cahaya | Pijar (Tapak Sederhana) |
| bahan | aluminium |
Figure 2: Product dimensions for the P6064-31 Wall Lantern.
5. Arahan Pemasangan
5.1 Pra-Pemasangan
- Matikan kuasa pada pemutus litar atau kotak fius.
- Buka bungkusan lekapan dengan berhati-hati dan periksa sebarang kerosakan.
- Pastikan semua bahagian yang disenaraikan dalam Bahagian 3 ada.
5.2 Sizing and Placement Guidance
Proper sizing and placement are crucial for optimal illumination and aesthetic appeal. Refer to the video below for visual guidance.
Video: Outdoor Lighting - Sizing and Selection. This video provides guidance on selecting the appropriate size and mounting height for outdoor lighting fixtures, including wall lanterns, for entryways and garages.
- Saiz lekapan: For entrances and garages, select fixtures that measure 1/4 to 1/3 of the door's height.
- Ketinggian pemasangan: Pasang lekapan pada paras mata, kira-kira 5.5 hingga 6 kaki dari tanah ke pusat lekapan.
- Pintu Masuk: Mount lights on either side of the door, 8 to 10 feet apart.
- Pintu Garaj: For a one-car garage, use a single wall lantern. For two or more car garages, mount lights on either side of the doors, or across the top of the doors for even illumination.
Gambar 3: Cthample of wall lantern placement for an entryway.
Gambar 4: Cthample of wall lantern placement for a garage.
5.3 Pendawaian dan Pemasangan
- Pasang pendakap pelekap pada kotak simpang menggunakan skru yang disediakan.
- Connect the fixture's wires to the house wires: black to black (live), white to white (neutral), and bare copper (ground) to the house ground wire and the mounting bracket. Secure connections with wire nuts.
- Berhati-hati masukkan semua wayar ke dalam kotak simpang.
- Align the fixture with the mounting bracket and secure it with the provided screws or nuts.
5.4 Pemasangan Mentol
- Insert one medium base incandescent bulb (not included) into the socket.
- Jangan melebihi wat maksimumtage sebanyak 100 Watt.
- Install the etched glass shade by carefully placing it over the bulb and securing it according to the specific instructions on the included installation sheet.
6. Arahan Operasi
Once installed and powered, operate the wall lantern using the standard wall switch connected to the fixture's circuit. Ensure the bulb is correctly installed and the power is on at the circuit breaker.
7. Penyelenggaraan
To maintain the appearance and functionality of your fixture:
- Pembersihan: Matikan kuasa sebelum membersihkan. Lapkan lekapan dengan lembut, damp kain. Jangan gunakan pembersih atau pelarut yang melelas, kerana ia boleh merosakkan kemasan atau kaca.
- Penggantian mentol: Turn off power before replacing the bulb. Allow the bulb to cool completely. Replace with a new medium base incandescent bulb, not exceeding 100 Watts.
8. Penyelesaian masalah
If your fixture is not operating correctly, refer to the following common issues:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Lampu tidak menyala | Tiada kuasa untuk lekapan | Check circuit breaker, wall switch, and wiring connections. |
| Mentol terbakar | Ganti mentol. | Pastikan mentol diskrukan dengan ketat. |
| Cahaya berkelip-kelip | Sambungan mentol atau pendawaian longgar | Tighten bulb. Check wiring connections (with power off). |
| Fixture is dim | wat mentol tak betultage | Pastikan mentol wattage is appropriate and not too low. |
9. Waranti dan Sokongan
Lekapan Lampu Progress ini dilindungi oleh Waranti Terhad 1 tahun. This warranty guarantees your complete satisfaction with your purchase and includes professional after-sales customer service support.
For warranty claims or technical assistance, please refer to the contact information provided on your purchase receipt or visit the official Progress Lighting webtapak.
