Furman P-8 PRO C Power Conditioner Instruction Manual

1. Pengenalan

The Furman P-8 PRO C is a professional-grade power conditioner designed to provide advanced protection and clean power for your valuable audio, video, and electronic equipment. It incorporates Furman's exclusive Series Multi-Stage Perlindungan (SMP), Teknologi Penapisan Linear (LiFT), dan Extreme Voltage Shutdown (EVS) to safeguard against power surges, spikes, and AC line noise, ensuring optimal performance and longevity of your connected devices.

2. Maklumat Keselamatan

WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Do not remove cover. No user-serviceable parts inside. Refer servicing to qualified service personnel.

• Always connect the P-8 PRO C to a properly grounded 20-amp salur keluar elektrik.
• Do not overload the unit. The total current draw of all connected equipment must not exceed 20 amps.
• Pastikan pengudaraan yang betul di sekeliling unit. Jangan sekat sebarang bukaan pengudaraan.
• Jauhkan cecair dari unit.
• Amaran Proposisi 65: Produk ini mungkin mengandungi bahan kimia yang diketahui oleh State of California yang menyebabkan barah dan cacat lahir atau bahaya pembiakan yang lain.

3. Ciri-ciri Produk

3.1. Advanced Protection Technologies

• Siri Multi-Stage Protection (SMP): Furman's SMP circuit provides superior surge suppression, absorbing and dissipating damaging transient voltages without sacrificing itself. This ensures continuous protection for your equipment.
• Linear Filtering Technology (LiFT): LiFT significantly reduces AC line noise across a wide frequency range, delivering cleaner power to your sensitive electronics. This results in improved audio clarity and video resolution.
• Voltage Shutdown (EVS): The EVS circuit continuously monitors incoming voltage. If it detects an unsafe overvoltage condition (exceeding 137 volts), it automatically shuts down the connected equipment to prevent damage, then restores power once voltage kembali ke tahap selamat.

3.2. Outlets and Power

• Jumlah Outlet: 9 (1 front-panel convenience outlet, 8 rear-panel outlets).
• Rear Outlets: Direka dengan ample spacing to accommodate 'wall wart' power supplies and feature security strapping to prevent accidental disconnections.
• Kord Kuasa: Integrated 10-foot, 12-gauge power cord.
• Amppemadaman: 20-amp capacity, requiring a 20-amp female receptacle or a Furman ADP-1520B adapter for connection.

3.3. Ciri-ciri Tambahan

• Penyambung BNC: A BNC connector is located on the rear panel for optional GN-LED or GN-I gooseneck lights (sold separately) to illuminate the rear of your rack.
• Reka Bentuk Boleh Lekap di Rak: Standard 1U rack-mount chassis for easy integration into professional setups.

4. Persediaan dan Pemasangan

4.1. Pemasangan Rak

The P-8 PRO C is designed for standard 1U rack installation. Secure the unit using appropriate rack screws (not included) through the mounting ears on both sides of the front panel. Ensure sufficient space for ventilation.

4.2. Sambungan Kuasa

1. Connect the integrated 10-foot, 12-gauge power cord from the P-8 PRO C to a dedicated 20-amp, 120-volt AC grounded electrical outlet. If a 20-amp receptacle is not available, use a Furman ADP-1520B adapter.
2. Ensure the main power switch on the front panel of the P-8 PRO C is in the OFF position before connecting any equipment.

4.3. Peralatan Penyambung

Plug your audio, video, or electronic equipment into the 8 rear-panel outlets and the 1 front-panel convenience outlet. Utilize the wide spacing of the rear outlets for larger power adapters. For critical equipment, consider using the security strapping to prevent accidental unplugging.

4.4. Optional Gooseneck Lights

If desired, connect optional Furman GN-LED or GN-I gooseneck lights to the BNC connector on the rear panel for rack illumination.

5. Operasi

5.1. Menghidupkan/Mematikan

Once all equipment is connected, flip the main power switch on the front panel to the ON position. The P-8 PRO C will power on, and connected equipment will receive conditioned and protected power.

5.2. Lampu Penunjuk

• Protection OK (Green LED): This indicator illuminates green when the SMP circuit is active and providing surge protection. If this light is off, the unit's surge protection has been compromised, and the unit should be serviced.
• Voltage (Red LED): This indicator illuminates red when the incoming voltage exceeds safe operating levels (above 137 volts). The EVS circuit will shut down power to connected equipment until the voltage kembali ke julat yang selamat.

6. Penyelenggaraan

The Furman P-8 PRO C is designed for reliable, maintenance-free operation. No user-serviceable parts are inside. For cleaning, disconnect the unit from the power source and wipe the exterior with a soft, dry cloth. Avoid using abrasive cleaners or solvents.

7. Penyelesaian masalah

7.1. No Power to Outlets

• Check the main power switch on the front panel to ensure it is in the ON position.
• Verify that the P-8 PRO C is securely plugged into a functioning 20-amp salur keluar dinding.
• Check the circuit breaker on the P-8 PRO C (usually located near the power cord input) and reset if tripped.
• If the 'Extreme Voltage' indicator is lit, the incoming voltage is too high. The unit will automatically restore power when conditions normalize.
• If the 'Protection OK' indicator is off, the surge protection circuit may be compromised. Discontinue use and contact Furman support.

7.2. Audio/Video Noise

• Pastikan semua peralatan dibumikan dengan betul.
• Periksa sambungan kabel yang longgar.
• The LiFT technology in the P-8 PRO C is designed to reduce AC line noise. If noise persists, try isolating the source of the noise by unplugging devices one by one.

8. Spesifikasi

9. Apa yang ada di dalam Kotak

• 1 x Furman P-8 PRO C Power Conditioner

10. Waranti dan Sokongan

Furman products are backed by a limited warranty. For detailed warranty information, product registration, and technical support, please visit the official Furman webtapak atau hubungi perkhidmatan pelanggan mereka. Simpan resit pembelian anda sebagai bukti pembelian untuk tuntutan waranti.