Transcend MTS400 256GB M.2 SATA III SSD User Manual

1. Pengenalan

The Transcend MTS400 256GB M.2 SATA III Solid State Drive is designed to enhance the speed and capacity of compatible computing devices. Featuring a compact 42mm M.2 form factor and MLC NAND Flash memory, this SSD offers reliable performance with read speeds up to 560MB/s and write speeds up to 320MB/s. It is ideal for ultrabooks, tablets, and other compact systems requiring a significant storage upgrade.

Image: Transcend MTS400 256GB M.2 SATA III SSD retail packaging.

2. Maklumat Keselamatan

• Always power off and unplug your computer before installation.
• Discharge any static electricity from your body before handling the SSD to prevent damage to electronic components.
• Pegang SSD pada tepinya untuk mengelakkan sentuhan dengan penyambung atau komponen emas.
• Ensure proper ventilation around your device to prevent overheating.
• Jangan cuba membuka atau mengubah suai SSD. Ini akan membatalkan jaminan.

3. Kandungan Pakej

Your Transcend MTS400 256GB M.2 SATA III SSD package should contain:

• 1 x Transcend MTS400 256GB M.2 SATA III Solid State Drive

Note: Mounting screws or additional cables may not be included and might need to be purchased separately depending on your system.

4. Spesifikasi

5. Persediaan dan Pemasangan

5.1. Senarai Semak Prapemasangan

• Keserasian: Ensure your device has an available M.2 slot that supports SATA-based M.2 SSDs (specifically the 2242 form factor). M.2 NVMe and M.2 SATA drives are not interchangeable at the protocol level.
• sandaran: Back up all important data from your existing storage drive before proceeding.
• Alatan: You may need a small Phillips-head screwdriver and possibly an anti-static wrist strap.
• Matikan: Completely shut down your computer and disconnect all power cables.

5.2. Pemasangan Fizikal (Desktop/Komputer Riba)

The installation process varies slightly between desktops and laptops. Refer to your device's manual for specific instructions on accessing the M.2 slot.

1. Open your computer case or laptop's back panel.
2. Locate the M.2 slot on your motherboard. It typically has a small screw at the end.
3. Carefully insert the Transcend MTS400 SSD into the M.2 slot at a slight angle (approximately 30 degrees). The gold contacts should slide in smoothly.
4. Gently press the SSD down until it is parallel with the motherboard.
5. Secure the SSD with the small screw provided with your motherboard or device.

Image: Transcend MTS400 M.2 SSD installed in a motherboard slot.

Imej: Jarak dekat view of the Transcend MTS400 M.2 SATA III SSD.

5.3. Persediaan Perisian (Windows)

After physical installation, you need to initialize and format the new SSD for your operating system to recognize and use it.

1. Reconnect power and turn on your computer.
2. Buka Pengurusan Cakera: Right-click the Start button, then select 'Disk Management'.
3. You should see your new SSD listed as 'Disk [number]' and marked as 'Unallocated'.
4. Right-click on the unallocated space of your new SSD and select 'New Simple Volume'.
5. Follow the New Simple Volume Wizard to assign a drive letter and format the drive. It is recommended to use the NTFS file sistem.
6. Once formatted, the SSD will be ready for use.

5.4. Video Guides for M.2 SSD Installation

For visual assistance with M.2 SSD installation and setup, please refer to the following video guides:

6. Arahan Operasi

Once installed and formatted, your Transcend MTS400 SSD operates like any other storage drive. You can install operating systems, applications, and store files on it. The benefits of an SSD include faster boot times, quicker application loading, and improved overall system responsiveness compared to traditional hard disk drives.

• Sistem pengendalian: For optimal performance, it is recommended to install your operating system on the SSD.
• Penyimpanan Data: Use the SSD for frequently accessed programs and files to leverage its speed.

7. Penyelenggaraan

To ensure the longevity and optimal performance of your Transcend MTS400 SSD, consider the following maintenance tips:

• Sokongan TRIM: Ensure your operating system has TRIM enabled. TRIM helps the SSD maintain its performance over time by efficiently managing data blocks. Most modern operating systems (Windows 7 and later, Linux kernels 2.6.31 and later) support TRIM automatically.
• Pemantauan SMART: Utilize S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) tools to monitor the health and status of your SSD.
• Kemas kini Firmware: Periksa Transcend secara berkala weblaman web untuk sebarang kemas kini perisian tegar yang tersedia untuk model SSD anda. Kemas kini perisian tegar boleh meningkatkan prestasi, kestabilan dan keserasian.
• Elakkan Melebihi: Walaupun SSD berfungsi dengan baik walaupun hampir penuh, meninggalkan sedikit ruang kosong (contohnya, 10-15%) dapat membantu mengekalkan prestasi optimum dan memanjangkan jangka hayat.
• Power Shield: The MTS400 supports Power Shield, which helps prevent data loss during sudden power outages. Ensure your system's power supply is stable.

8. Penyelesaian masalah

8.1. Pemacu Tidak Dikesan

• Semak Sambungan: Ensure the SSD is correctly seated in the M.2 slot and the mounting screw is secure.
• Tetapan BIOS/UEFI: Enter your system's BIOS/UEFI settings (usually by pressing Del, F2, F10, or F12 during boot-up). Verify that the M.2 slot is enabled and configured correctly (e.g., SATA mode).
• Keserasian: Double-check that your motherboard's M.2 slot supports SATA-based M.2 SSDs. Some slots are NVMe-only.
• Try Another Slot/Device: If available, test the SSD in a different M.2 slot or another compatible device to rule out a faulty SSD.

8.2. Initialization/Formatting Issues

• Pengurusan Cakera: Ensure you are using Windows Disk Management (or an equivalent tool in Linux) to initialize and format the drive.
• Status dalam talian: In Disk Management, if the drive is listed as 'Offline', right-click it and select 'Online'.
• Rescan Disks: In Disk Management, go to 'Action' > 'Rescan Disks' to refresh the view.

8.3. Prestasi Perlahan

• TRIM Didayakan: Sahkan bahawa TRIM telah diaktifkan dalam sistem pengendalian anda.
• Perisian tegar: Semak dan pasang sebarang kemas kini perisian tegar yang tersedia untuk SSD.
• SATA III Port: Ensure the SSD is connected to a SATA III (6Gb/s) compatible M.2 slot for maximum speed.
• Kemas Kini Pemandu: Ensure your motherboard's chipset drivers are up to date.

9. Maklumat Waranti

Transcend products are manufactured to the highest standards and undergo rigorous testing. This product is covered by a limited warranty. For detailed warranty terms and conditions, please visit the official Transcend weblaman web atau hubungi sokongan pelanggan Transcend.

10. Sokongan

If you encounter any issues or have questions regarding your Transcend MTS400 SSD that are not covered in this manual, please refer to the following resources:

• Transcend Official Webtapak: melawat www.transcend-info.com for product information, drivers, firmware, and FAQs.
• Perkhidmatan Pelanggan: Contact Transcend customer support through their webtapak untuk bantuan teknikal.