pengenalan
This manual provides comprehensive instructions for the installation, operation, and maintenance of the HID iCLASS R90 Long Range Reader (Model: 940NTNTEK00000). The R90 is designed for secure and reliable long-range identification in various access control applications. It supports iCLASS SE, standard iCLASS, Wiegand, and terminal configurations, operating with a 32-bit output and standard 1-second read time, without proximity functionality.
Rajah 1: Depan view of the HID iCLASS R90 Long Range Reader. This image shows the device's sleek black casing, a prominent red light bar along the top edge indicating operational status, and the subtle, embossed HID logo near the bottom center. The reader has a textured matte finish.
Maklumat Keselamatan
Please read all safety instructions carefully before installing or operating the device. Failure to follow these instructions may result in injury, damage to the device, or voiding of the warranty.
- Pastikan bekalan elektrik diputuskan sebelum melakukan sebarang pemasangan atau penyelenggaraan.
- Hanya kakitangan yang berkelayakan harus memasang dan menyervis peralatan ini.
- Jangan dedahkan peranti kepada suhu yang melampau, kelembapan atau cahaya matahari langsung.
- Elakkan meletakkan peranti berhampiran medan elektromagnet yang kuat.
- Gunakan hanya aksesori dan bekalan kuasa yang diluluskan oleh pengilang.
Kandungan Pakej
Sahkan bahawa semua item terdapat dalam pakej sebelum meneruskan pemasangan:
- 1 x HID iCLASS R90 Long Range Reader (Model: 940NTNTEK00000)
- 1 x Installation Guide (Printed or Digital)
- Mounting Hardware (Screws, anchors, etc.)
Persediaan dan Pemasangan
Pemasangan yang betul adalah penting untuk prestasi optimum. Ikuti langkah-langkah ini dengan teliti:
- Pemilihan Tapak: Choose a mounting location that provides clear line-of-sight to the intended read area and is protected from severe weather conditions if installed outdoors.
- Pemasangan:
- Secure the mounting bracket (if applicable) to the wall or pole using the provided hardware.
- Attach the R90 reader to the mounting bracket, ensuring it is firmly in place.
- Pendawaian:
- Connect the reader's wiring harness to the access control panel according to the wiring diagram provided in the separate installation guide. Pay close attention to power (VDC), ground (GND), data lines (Data 0, Data 1), and LED control lines.
- Pastikan semua sambungan selamat dan terlindung.
- Hidupkan kuasa: Apply power to the access control system. The reader's indicator light should illuminate, typically red or green, indicating power and readiness.
Arahan Operasi
The HID iCLASS R90 reader operates by reading iCLASS credentials presented within its read range. The operational status is indicated by the integrated LED.
- Credential Presentation: Present a compatible iCLASS credential (card, fob, etc.) within the reader's effective read range. The optimal range will vary based on environmental factors and credential type.
- Lampu Penunjuk:
- merah: Indicates power is applied and the reader is in standby mode.
- Green (or flashing): Indicates a successful read and data transmission to the access control panel.
- Nota: Specific LED behavior may be configurable via the access control system.
- Penghantaran Data: Upon a successful read, the reader transmits the credential data to the connected access control panel via the Wiegand interface. The panel then processes the data to grant or deny access.
Penyelenggaraan
The HID iCLASS R90 reader is designed for minimal maintenance. Regular cleaning and inspection can help ensure long-term reliability.
- Pembersihan:
- Gently wipe the reader's surface with a soft, damp kain.
- Jangan gunakan pembersih yang melelas, pelarut atau bahan kimia yang keras.
- Pastikan tiada cecair memasuki peranti.
- Pemeriksaan: Periodically check the mounting and wiring connections for any signs of wear, corrosion, or loosening.
- Kemas kini Firmware: Consult your access control system administrator or HID support for information on available firmware updates, which may improve performance or add features.
Menyelesaikan masalah
If you encounter issues with your HID iCLASS R90 reader, refer to the following common problems and solutions:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Reader not powering on (no LED light) | No power supply; faulty wiring; damaged reader. | Check power connections and source. Verify wiring to the access control panel. If issues persist, contact support. |
| Reader not reading credentials | Incompatible credential; credential too far; interference; faulty reader. | Ensure credential is iCLASS compatible. Present credential closer to the reader. Check for nearby metallic objects or strong RF sources. Test with a known good credential. |
| Reader reads, but access is denied | Access control panel issue; credential not enrolled; incorrect permissions. | Verify credential enrollment in the access control system. Check user permissions and time schedules. Consult the access control panel's manual. |
If the problem persists after attempting these solutions, please contact HID Global technical support.
Spesifikasi
Key technical specifications for the HID iCLASS R90 Long Range Reader:
- Nombor Model: 940NTNTEK00000
- Jenama: BERSEMBUNYI
- Pengeluar: HID Global
- Penerangan: R90 ICLS SE, STD, WG, TERM, BLK, NO PRX, 32BIT, STD 1 SEC
- Dimensi Pakej: 15.8 x 15 x 2.8 inci (40.13 x 38.1 x 7.11 cm)
- Berat Barang: 4.59 paun (2.08 kg)
- UPC: 639399038402
- Keserasian: iCLASS SE, standard iCLASS credentials
- Output: Wiegand (32-bit)
- ciri-ciri: Long Range, No Proximity Functionality
Waranti dan Sokongan
For warranty information, technical support, or service requests, please contact HID Global directly or refer to their official website. Keep your purchase receipt and product model number (940NTNTEK00000) readily available when contacting support.
HID Global Official Webtapak: www.hidglobal.com
