SVS PB-1000 Powered Subwoofer

1. Pengenalan

Thank you for choosing the SVS PB-1000 Powered Subwoofer. This manual provides essential information for the proper setup, operation, and maintenance of your new subwoofer. The PB-1000 is designed to deliver deep, powerful, and accurate bass for both home theater and music listening experiences. Its 10-inch high-excursion driver and 300-watt RMS (700+ watts peak) Sledge STA-300D DSP amplifier ensure precise control and impressive low-frequency extension.

Rajah 1.1: Depan view of the SVS PB-1000 Subwoofer without the grille, highlighting the driver and port.

2. Maklumat Keselamatan

Please read all safety instructions before operating your SVS PB-1000 subwoofer. Retain this manual for future reference.

• Sumber Kuasa: Connect the subwoofer only to a power outlet of the type described in this manual or marked on the unit.
• Pengudaraan: Ensure adequate ventilation around the subwoofer. Do not block any ventilation openings.
• Air dan Kelembapan: Do not expose the subwoofer to rain, moisture, dripping, or splashing. Do not place objects filled with liquids, such as vases, on the apparatus.
• haba: Do not place the subwoofer near heat sources such as radiators, heat registers, stoves, or other apparatus (including amppenghidup) yang menghasilkan haba.
• Pembersihan: Bersihkan hanya dengan kain kering.
• Servis: Jangan cuba servis produk ini sendiri. Rujuk semua perkhidmatan kepada pegawai perkhidmatan yang berkelayakan.
• penempatan: Place the subwoofer on a stable, level surface to prevent tipping.

3. Kandungan Pakej

Upon opening the box, please verify that all items are present and in good condition:

• SVS PB-1000 Powered Subwoofer
• Kabel Kuasa Boleh Tanggalkan
• Panduan Mula Pantas (rujuk manual ini untuk arahan terperinci)
• Grille (pre-installed or separate)

Rajah 3.1: Depan view of the SVS PB-1000 Subwoofer with the grille attached.

4. Persediaan

4.1 Penempatan Subwoofer

Subwoofer placement significantly impacts performance. Experiment with different locations to find the best sound for your room. Common placement options include:

• Front of the Room: Near the front speakers, often in a corner or along the front wall. Corner placement can increase output but may also emphasize certain frequencies.
• Mid-Wall: Along a side wall, which can provide a more balanced bass response.
• "Subwoofer Crawl": Place the subwoofer in your primary listening position, then crawl around the room to find where the bass sounds best. This is often the ideal spot for the subwoofer.

Gambar 4.1: Cthample of SVS PB-1000 placement in a living space.

4.2 Sambungan

The PB-1000 offers both Line Level (RCA) and Speaker Level inputs. Choose the connection method that best suits your audio system.

Figure 4.2: Rear panel connections and controls of the SVS PB-1000.

4.2.1 Line Level Connection (Recommended)

This is the preferred method for most home theater receivers and pre-amplifiers with a dedicated Subwoofer/LFE output.

1. Connect one end of an RCA cable to the LFE/Subwoofer output on your receiver/processor.
2. Connect the other end of the RCA cable to the "LINE LEVEL INPUT" (LFE) on the PB-1000's rear panel.
3. If your receiver has separate Left and Right pre-outs for the subwoofer, connect both to the "LINE LEVEL INPUT" (Left and Right) on the PB-1000.

4.2.2 Speaker Level Connection

Use this method if your receiver/amplifier does not have a dedicated subwoofer output.

1. Connect speaker wires from the main left and right speaker outputs of your receiver/amplifier to the "HIGH LEVEL SPEAKER INPUT" terminals on the PB-1000. Ensure correct polarity (+ to + and - to -).
2. Then, connect your main left and right speakers to the "HIGH LEVEL SPEAKER OUTPUT" terminals on the PB-1000.

4.3 Hidupkan

1. Connect the detachable power cord to the AC inlet on the rear panel of the PB-1000.
2. Pasangkan hujung kord kuasa yang satu lagi ke soket dinding yang sesuai.
3. Flip the main power switch on the rear panel to the "ON" position. The LED indicator on the front of the subwoofer will illuminate.

5. Kawalan Operasi

The SVS PB-1000 features several controls on its rear panel to fine-tune its performance to your system and room acoustics.

• Kelantangan (Kenaikan): Melaraskan tahap output keseluruhan subwoofer. Mulakan dengan tetapan rendah dan tingkatkan secara beransur-ansur sehingga bes sebati dengan pembesar suara utama anda.
• Low Pass Filter (Crossover): This control sets the upper frequency limit for the subwoofer. Frequencies above this setting will be rolled off.
  • If using a receiver with LFE output and bass management, set this to LFE (120Hz) or bypass if your receiver handles the crossover.
  • If using speaker level inputs or a stereo receiver without bass management, adjust this to blend with your main speakers (typically between 60Hz and 100Hz).
• Fasa: Adjusts the phase of the subwoofer output relative to your main speakers. This helps ensure that bass waves from the subwoofer and main speakers arrive at your listening position in sync.
  • Start at 0 degrees. If the bass sounds weak or hollow, try 180 degrees. The setting that produces the loudest and most impactful bass is usually correct.
• Auto/On/Standby Switch:
  • Auto: Subwoofer akan dihidupkan secara automatik apabila isyarat audio dikesan dan memasuki mod siap sedia selepas tempoh tidak aktif.
  • pada: Subwoofer kekal dihidupkan secara berterusan.
  • Bersedia: The subwoofer remains in a low-power standby state.

6. Penyelenggaraan

The SVS PB-1000 is designed for years of reliable performance with minimal maintenance.

• Pembersihan: Use a soft, dry cloth to clean the cabinet. Avoid using abrasive cleaners, solvents, or harsh chemicals.
• habuk: Regularly dust the driver and port areas to prevent accumulation.
• Pengudaraan: Pastikan bahagian belakang amplifier panel has adequate airflow and is not obstructed.
• Storan: If storing the subwoofer for an extended period, disconnect it from power and store it in a cool, dry place.

7. Penyelesaian masalah

If you experience issues with your PB-1000, consult the following table before contacting customer support.

8. Spesifikasi

Figure 8.1: SVS PB-1000 Subwoofer dimensions.

9. Maklumat Waranti

SVS products are designed for reliability and performance. The SVS PB-1000 Subwoofer comes with a comprehensive warranty. Please refer to the official SVS website or your purchase documentation for the most current and detailed warranty terms and conditions. Generally, the warranty covers defects in materials and workmanship under normal use.

Jenis Waranti: penuh

For warranty claims or inquiries, please retain your proof of purchase and contact SVS customer support.

10. Sokongan Pelanggan

For technical assistance, troubleshooting beyond this manual, or warranty service, please contact SVS customer support:

• Webtapak: Visit the official SVS webtapak untuk Soalan Lazim, artikel sokongan dan maklumat hubungan.
• E-mel/Telefon: Specific contact details can be found on the SVS webbahagian sokongan tapak.

When contacting support, please have your product model (PB-1000) and serial number ready.