1. Pengenalan
This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your Steinbach Jet Light 060065 LED inlet nozzle. This product is designed to provide illumination for swimming pools, integrating an LED light into a standard inlet nozzle. Please read this manual thoroughly before installation and use, and keep it for future reference.
2. Arahan Keselamatan Penting
Always follow basic safety precautions when installing and using this electrical product, especially when children are present. Failure to follow these instructions could result in injury or property damage.
- Keselamatan Elektrik: Always disconnect power to the pool system before attempting any installation, maintenance, or repair. Ensure the power supply meets the specified voltage (230V AC) and the transformer output (12V DC).
- Air dan Elektrik: Never operate the light if the power cord or transformer is damaged. Do not immerse the transformer in water. Ensure all electrical connections are dry and protected from water.
- Pemasangan: Installation should only be performed by a qualified professional or a knowledgeable individual familiar with pool equipment and electrical safety. Ensure the product is securely installed according to the instructions to prevent leaks.
- Kanak-kanak: Keep all packaging materials and small parts away from children. This product is not a toy.
- Keadaan Operasi: Do not operate the light out of water for extended periods, as this may cause overheating and damage.
3. Kandungan Pakej
Please check that all items are present and undamaged before beginning installation:
- Steinbach Jet Light 060065 LED Inlet Nozzle
- 12V Power Adapter (Transformer)
- Sealing Gaskets/Rings
- Manual Pengguna
4. Persediaan dan Pemasangan
4.1. Sebelum Anda Bermula
- Ensure your pool has a suitable punch-out or opening with a diameter between 59 mm and 65 mm for the inlet nozzle.
- Turn off and disconnect all power to your pool's filtration system and any other electrical components.
- Drain the pool water below the level of the inlet nozzle opening.
- Gather necessary tools (e.g., wrenches, sealant if required).
4.2. Langkah Pemasangan
- Sediakan Pembukaan: Ensure the existing inlet nozzle opening in your pool wall is clean and free of debris. The opening must be between 59 mm and 65 mm in diameter.
- Sapukan Sealant (Pilihan): If desired, apply a thin bead of pool-safe silicone sealant around the edge of the opening on the pool wall for extra sealing.
- Insert the Nozzle: From inside the pool, insert the Steinbach Jet Light 060065 LED inlet nozzle through the prepared opening. Ensure the sealing gasket is correctly positioned between the nozzle flange and the pool wall.
- Selamatkan muncung: From the outside of the pool, attach the retaining nut onto the threaded part of the nozzle. Hand-tighten first, then use a wrench to firmly secure it, ensuring a watertight seal. Do not overtighten.
- Sambungkan Kabel Kuasa: Route the power cable from the nozzle to the location of the 12V power adapter. Ensure the cable is not pinched or damaged during routing.
- Sambung ke Penyesuai Kuasa: Plug the nozzle's power cable into the 12V power adapter.
- Connect Power Adapter to Mains: Plug the 12V power adapter into a grounded 230V AC electrical outlet. Ensure the outlet is protected by a Ground Fault Circuit Interrupter (GFCI) for safety.
- Ujian untuk Kebocoran: Refill the pool to the normal operating level. Carefully inspect around the inlet nozzle for any signs of leaks. If leaks are detected, drain the pool slightly and re-tighten the retaining nut.
5. Operasi
Once installed and connected to power, the Steinbach Jet Light 060065 is ready for use. The light is controlled by the power supply it is connected to. Typically, this will be a switch on the power outlet or a dedicated switch for your pool lighting circuit.
- Menghidupkan: Activate the power switch connected to the 12V power adapter. The LED light will illuminate.
- Mematikan: Deactivate the power switch connected to the 12V power adapter. The LED light will turn off.
- Adjusting Inlet Cone: The central inlet cone can be adjusted to direct water flow as needed.
6. Penyelenggaraan
Regular maintenance ensures the longevity and optimal performance of your Steinbach Jet Light.
- Pembersihan: Periodically clean the visible part of the LED inlet nozzle to remove any algae, mineral deposits, or debris that may accumulate. Use a soft cloth and mild, pool-safe cleaning solution. Do not use abrasive cleaners.
- Pemeriksaan: Regularly inspect the power cable for any signs of damage, fraying, or cracks. Check the sealing around the nozzle for any leaks. Address any issues promptly.
- Musim sejuk: If you winterize your pool, ensure the light is properly drained and protected from freezing temperatures. It is recommended to remove the power adapter and store it in a dry, protected area during the off-season.
7. Penyelesaian masalah
If you encounter issues with your Steinbach Jet Light, refer to the table below for common problems and solutions.
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Cahaya tidak menyala. | No power to the adapter; faulty connection; damaged LED. | Check power outlet and switch. Ensure all connections are secure. If still not working, contact customer support. |
| Cahaya berkelip atau malap. | Loose connection; insufficient power; aging LED. | Check all electrical connections. Ensure the power adapter is functioning correctly. |
| Water leak around the nozzle. | Improperly tightened retaining nut; damaged gasket; incorrect installation. | Drain pool slightly, re-tighten the retaining nut. Inspect and replace gaskets if damaged. Ensure correct installation procedure was followed. |
8. Spesifikasi Teknikal
| Ciri | Spesifikasi |
|---|---|
| Jenama | Steinbach |
| Nombor Model | 060065 |
| Dimensi Produk | 1 x 1 x 1 cm; 1 kg (approximate) |
| Input Voltage | 230 Voltan AC |
| Keluaran Voltage | 12 Volt DC |
| Wattage | 36 Watt |
| Jenis Cahaya | LED |
| Warna Cerah | putih |
| Required Opening Diameter | Ø 59 - 65 mm |
9. Waranti dan Sokongan
Steinbach products are manufactured to high quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official Steinbach website. If you require technical assistance, have questions about installation, or need to report a defect, please contact Steinbach customer support through their official channels. Please have your model number (060065) and proof of purchase ready when contacting support.
