Manual Pengguna Kerusi Pejabat Belakang Tengah Amazon Basics HL-002566

pengenalan

This manual provides detailed instructions for the assembly, operation, and maintenance of your Amazon Basics Mid-Back Office Chair, model HL-002566. Please read this manual thoroughly before assembly and use to ensure proper function and safety.

Imej: Depan view of the Amazon Basics Mid-Back Office Chair.

Maklumat Keselamatan

Arahan Keselamatan Penting:

• This chair has a maximum weight capacity of 275 paun (124.74 kg). Jangan melebihi had ini.
• Proper assembly is necessary for stability. Please follow all instructions in this user manual carefully.
• Pastikan semua skru dan bolt diketatkan dengan kukuh sebelum digunakan. Periksa secara berkala dan ketatkan semula jika perlu.
• Jangan berdiri di atas kerusi.
• Use the chair only for its intended purpose as an office or task chair.
• Jauhkan kanak-kanak daripada kerusi semasa pemasangan. Bahagian-bahagian kecil mungkin boleh menyebabkan tercekik.

Kandungan Pakej

Sebelum memulakan pemasangan, pastikan semua bahagian ada dan tidak rosak. Jika mana-mana bahagian hilang atau rosak, jangan teruskan pemasangan dan hubungi khidmat pelanggan.

• Kusyen Tempat Duduk
• Kusyen Belakang
• Silinder Angkat Gas
• Asas (asas bintang 5 mata)
• Tempat letak tangan (2)
• Kastor (5)
• Perkakasan (skru, pencuci, sepana Allen)

Arahan Perhimpunan

Follow these steps carefully for proper assembly. It is recommended to assemble the chair on a soft, clean surface to prevent damage.

1. Pasang Kastor ke Pangkalan: Insert each of the five casters into the holes at the end of each leg of the 5-point star base. Push firmly until they click into place.
2. Masukkan Pengangkat Gas: Letakkan silinder pengangkat gas ke dalam lubang tengah tapak yang dipasang.
3. Pasangkan Tempat Letak Tangan pada Kusyen Tempat Duduk: Align the armrests with the pre-drilled holes on the underside of the seat cushion. Secure them using the provided screws and Allen wrench. Do not fully tighten yet.
4. Attach Back Cushion to Seat Cushion: Align the back cushion with the seat cushion and the armrests. Secure the back to the armrests and seat using the remaining screws. Once all screws are in place, tighten all armrest and back cushion screws evenly.
5. Letakkan Bahagian Atas yang Dipasang ke atas Pengangkat Gas: Carefully place the assembled seat and back onto the gas lift cylinder, ensuring the center mechanism on the underside of the seat aligns with the top of the gas lift.

Image: Diagram illustrating key features like pneumatic controls, tilt mechanism, and the stable 5-point base.

Arahan Operasi

Your Amazon Basics Office Chair offers several adjustments for personalized comfort.

• Pelarasan Ketinggian Tempat Duduk:

  To raise the seat, lift the lever on the right side of the chair while taking your weight off the seat. To lower the seat, lift the lever while seated. Release the lever at the desired height.

  

  Image: Pneumatic control lever for adjusting seat height.
• Tilt and Tilt Tension Adjustment:

  The chair features a tilt mechanism allowing the backrest and seat to recline together. To enable tilting, pull the same lever used for height adjustment outwards. Push it inwards to lock the chair in an upright position.

  Adjust the tilt tension by turning the round knob located under the front of the seat. Turn clockwise to increase tension (making it harder to recline) and counter-clockwise to decrease tension (making it easier to recline).

  

  Image: Tilt tension adjustment knob.
• Fungsi Pusing:

  The chair is designed with a 360-degree swivel function, allowing for easy rotation without moving the base.

• Roda Caster:

  The five caster wheels provide smooth mobility across various indoor surfaces.

  

  Image: One of the chair's caster wheels.

Image: A person using the Amazon Basics office chair at a desk, demonstrating its ergonomic design.

Penyelenggaraan

Regular maintenance helps prolong the life and appearance of your chair.

• Pembersihan: Lap bersih dengan iklanamp cloth. Avoid harsh chemicals or abrasive cleaners, which can damage the faux leather finish.
• Pemeriksaan perkakasan: Periodically check all screws and bolts to ensure they are tight. Re-tighten as necessary to maintain stability and prevent squeaks.
• Penjagaan Kastor: Keep caster wheels free of debris (hair, dust, etc.) to ensure smooth rolling.

Menyelesaikan masalah

Jika anda menghadapi sebarang masalah dengan kerusi anda, rujuk penyelesaian biasa berikut:

• Chair is unstable or wobbly:

  Ensure all assembly screws are fully tightened. Check that the gas lift is properly seated in the base and the seat mechanism.
• Seat height adjustment not working:

  Verify that the gas lift lever is functioning correctly and that the gas lift cylinder is properly installed. If the issue persists, the gas lift may need replacement.

• Kerusi berdecit:

  Tighten all screws and bolts. A small amount of silicone lubricant can be applied to moving parts if squeaking continues, avoiding contact with upholstery.

• Kastor tidak bergolek dengan lancar:

  Tanggalkan sebarang rambut atau serpihan yang membalut roda kastor. Bersihkan roda dan gandar.

Spesifikasi

Image: Detailed dimensions of the office chair, including height, width, and depth.

Sokongan Pelanggan

For further assistance, missing parts, or warranty inquiries, please contact Amazon Basics customer support. Refer to your purchase documentation for specific contact details.

Anda juga boleh melawat pegawai tersebut Kedai Asas Amazon untuk maklumat lanjut.