TOTOLINK iPuppy III 150Mbps Wireless Access Point User Manual

1. Pengenalan

The TOTOLINK iPuppy III is a compact and versatile 150Mbps wireless device designed to provide flexible network connectivity. It supports three primary operating modes: Access Point (AP), Router, and Repeater, making it suitable for various networking needs, from converting a wired connection to wireless to extending an existing Wi-Fi signal. Its micro USB power input allows for convenient powering via a computer or a standard USB power adapter.

2. Kandungan Pakej

Sila sahkan bahawa semua item terdapat dalam pakej anda:

• TOTOLINK iPuppy III Device
• Kabel USB
• Panduan Pemasangan Pantas
• Internet Cable (Ethernet Cable)
• Flyer

3. Produk Lebihview

Familiarize yourself with the device's ports and indicators.

Rajah 1: belakang view of the iPuppy III, highlighting the Reset/WPS button, Ethernet port, and Micro USB power input.

Rajah 2: Atas view of the iPuppy III, showing the TOTOLINK logo and status indicators.

Rajah 3: The iPuppy III held in a hand, illustrating its compact size.

4. Persediaan dan Tatarajah

This section outlines the general steps for setting up your iPuppy III. Specific configuration details will depend on the operating mode you choose.

1. Hidupkan kuasa: Connect the provided USB cable to the Micro USB Power In port on the iPuppy III and plug the other end into a computer's USB port or a USB power adapter (5V/1A recommended).
2. Sambungan Awal:
   • wayarles: On your computer or mobile device, search for available Wi-Fi networks. Connect to the network named "TOTOLINK_iPuppyIII" (default SSID).
   • Berwayar: Connect one end of the Ethernet cable to the iPuppy III's Ethernet port and the other end to your computer's Ethernet port.
3. Akses Web Antara muka: Buka a web pelayar dan masukkan alamat IP lalai (biasanya 192.168.1.1 or itotolink.net) ke dalam bar alamat.
4. log masuk: Masukkan nama pengguna dan kata laluan lalai (biasanya pentadbir/pentadbir or found in the Quick Installation Guide).
5. Pilih Mod Pengendalian: Follow the on-screen wizard to select your desired operating mode (AP, Router, or Repeater) and configure its settings.

Nota: For detailed, step-by-step instructions for each mode, refer to the Quick Installation Guide included in your package or the full user manual available on the TOTOLINK webtapak.

5. Mod Operasi

The iPuppy III supports three distinct operating modes:

5.1. AP Mode (Access Point)

In AP mode, the iPuppy III converts a wired internet connection into a wireless Wi-Fi network. This is ideal for locations with only wired Ethernet access, allowing wireless devices to connect.

• Connect the iPuppy III's Ethernet port to a wired network (e.g., a modem or existing router's LAN port).
• Configure the wireless network name (SSID) and password via the web antara muka.
• Wireless devices can then connect to the new Wi-Fi network.

5.2. Router Mode

Router mode allows the iPuppy III to act as a primary router, providing internet access to multiple devices. It supports various internet connection types:

• DHCP: Automatically obtains an IP address from your Internet Service Provider (ISP).
• PPPoE: Requires a username and password provided by your ISP (common for DSL connections).
• IP statik: Requires manual entry of IP address, subnet mask, gateway, and DNS servers.

Connect the iPuppy III's Ethernet port to your modem. Configure the internet connection type and wireless settings through the web antara muka.

5.3. Mod Pengulang

Repeater mode extends the coverage of an existing wireless network. The iPuppy III connects to an existing Wi-Fi signal and re-broadcasts it, eliminating Wi-Fi dead zones.

• Place the iPuppy III within range of your existing Wi-Fi network.
• Akses ke web interface, select Repeater mode, and scan for available networks.
• Select your existing Wi-Fi network and enter its password.
• The iPuppy III will then extend that network's coverage.

6. Penyelenggaraan

To ensure optimal performance and longevity of your iPuppy III:

• Jaga kebersihan: Regularly clean the device with a soft, dry cloth. Avoid liquid cleaners.
• Pengudaraan: Ensure the device is placed in a well-ventilated area to prevent overheating. Do not block ventilation holes.
• Kemas kini Firmware: Semak pegawai TOTOLINK secara berkala weblaman web untuk kemas kini perisian tegar. Mengemas kini perisian tegar boleh meningkatkan prestasi, menambah ciri baharu dan membetulkan pepijat.
• Tetapkan semula: If the device becomes unresponsive or you forget your login credentials, you can perform a factory reset by pressing and holding the RST/WPS button for approximately 5-10 seconds while the device is powered on. This will restore all settings to their factory defaults.

7. Penyelesaian masalah

If you encounter issues with your iPuppy III, try the following steps:

• Tiada Kuasa:
  • Pastikan kabel USB disambungkan dengan selamat pada kedua-dua peranti dan sumber kuasa.
  • Cuba port USB atau penyesuai kuasa yang berbeza.
• Tidak Boleh Akses Web Antara muka:
  • Verify your device is connected to the iPuppy III's network (wired or wireless).
  • Pastikan anda menggunakan alamat IP yang betul (192.168.1.1 or itotolink.net).
  • Kosongkan cache penyemak imbas anda atau cuba penyemak imbas lain.
  • Lumpuhkan sebarang perisian firewall atau antivirus buat sementara waktu.
• Tiada Akses Internet:
  • Check the connection to your modem/main router.
  • Verify the operating mode is correctly configured (AP, Router, or Repeater).
  • In Router mode, ensure your ISP settings (DHCP, PPPoE, Static IP) are correctly entered.
  • Reboot the iPuppy III and your modem/main router.
• Weak Wi-Fi Signal or Disconnections:
  • Relocate the iPuppy III to a more central location, away from obstructions and interference sources (e.g., microwaves, cordless phones).
  • If in Repeater mode, ensure it is placed within good range of the main Wi-Fi signal.
  • Semak kemas kini perisian tegar.
• Lupa kata laluan: Perform a factory reset (see Maintenance section).

If problems persist, contact TOTOLINK technical support for further assistance.

8. Spesifikasi

9. Waranti dan Sokongan

TOTOLINK products typically come with a limited warranty. Please refer to the warranty card included in your package or visit the official TOTOLINK webtapak untuk terma dan syarat waranti terperinci khusus untuk wilayah anda.

For technical support, product registration, or to download the latest drivers and firmware, please visit the official TOTOLINK support website. Contact information for customer service may also be found on the product packaging or the official webtapak.