pengenalan
The QualGear QG-TM-001 is an ultra-low profile, picture-hanging style TV wall mount designed for most 37 to 70-inch TVs and monitors, supporting up to 110 lbs. This mount allows your TV to sit less than 0.6 inches from the wall, providing a sleek and minimalist appearance. Constructed with durable stainless steel, it offers a secure and stable mounting solution. Please note: This mount is not compatible for wood stud installations for TVs with VESA (mounting hole patterns) less than 400x400mm.
Image: A television mounted on the QualGear QG-TM-001 wall mount, appearing flush with the wall.
Apa yang ada dalam Kotak
- Komponen Pemasangan Dinding
- Kit Perkakasan Pemasangan
Image: Various screws, washers, spacers, and wall mount components from the QualGear QG-TM-001 hardware kit.
Alat Diperlukan
Alat berikut disyorkan untuk pemasangan:
- Gerudi Elektrik
- Socket Wrench
- Pen Menanda
- tukul
Panduan Pemasangan
Follow these steps to properly install your QualGear QG-TM-001 TV wall mount:
Video: Official QualGear QG-TM-001 installation guide. This video demonstrates the step-by-step process of mounting the TV to the wall.
- Langkah 1: Sediakan Dinding
For most installations, locate the wall studs and mark the pilot holes centered on the stud. If not installing on a wood panel, ensure proper stud location. Drill the pilot holes and then screw the wall mount plates onto the wall securely. - Step 2: Install Adapter Brackets on TV
Attach the adapter brackets to the back of your TV. This mount supports a wide range of VESA mounting hole patterns. Select the appropriate screws, washers, and spacers from the provided hardware kit that match your TV's specifications. Securely fasten the brackets. - Step 3: Hang the TV on the Wall Plate(s)
Carefully lift the TV and hook the wire rope from the TV-mounted brackets over the wall plate rail. Ensure the TV is securely seated and correctly attached to the wall mount. This step may require assistance. - Step 4: Manage Cables
To manage cables, gently fold out the tilt support mechanism on the mount. Connect all necessary cables to your TV. Once cables are connected and organized, fold the tilt support back into its original position.
Beroperasi
The QualGear QG-TM-001 is a fixed wall mount, meaning it does not offer tilt, swivel, or rotation adjustments once installed. Its primary function is to hold the TV securely and flush against the wall. The tilt support feature can be temporarily engaged to provide space for cable access and management behind the TV.
Penyelenggaraan
To ensure the longevity and safety of your TV mount:
- Periksa semua skru dan sambungan secara berkala untuk memastikan ia kekal ketat dan selamat.
- Bersihkan pelekap dengan kain lembut dan kering. Elakkan pembersih atau pelarut yang melelas.
- Jangan melebihi kapasiti berat maksimum 110 lbs.
Menyelesaikan masalah
Jika anda menghadapi sebarang masalah semasa atau selepas pemasangan:
- TV Tidak Aras: Recheck the wall mount installation to ensure the wall plates are perfectly level before hanging the TV.
- TV Feels Unstable: Verify that all screws are tightened correctly and that the wall studs were properly located and utilized for mounting. Ensure the wire rope is securely hooked over the wall plate rail.
- Difficulty with Cable Access: Utilize the tilt support feature by folding it out to create temporary space for easier cable connection and management.
Spesifikasi
- Nombor Model: QG-TM-001
- Saiz TV yang Serasi: Most 37 to 70-inch TVs
- Kapasiti Berat: Sehingga 110 lbs
- Pemasangan Profile: Less than 0.6 inches from the wall
- Bahan: Keluli Tahan Karat
- Jenis Pemasangan: Pemasangan Dinding Tetap
- Dimensi Produk: 9.5 x 6.5 x 2 inci
- Berat Barang: 1.32 paun
- Keserasian VESA: 100x100mm hingga 800x800mm
Waranti dan Sokongan
For warranty information or technical support, please refer to the official QualGear weblaman web atau hubungi khidmat pelanggan mereka. Simpan resit pembelian anda untuk sebarang tuntutan jaminan.
