1. Pengenalan
The Go Power! GP-PWM-10-FM is a Pulse Width Modulated (PWM) digital solar controller designed to manage the charging of your battery bank from solar panels. This controller is capable of handling up to 10 amps of solar input, approximately 180 watts, and features a backlit display for easy monitoring of system parameters. It is compatible with various battery types and includes a built-in USB port for charging portable electronic devices.
2. Maklumat Keselamatan
- Baca semua arahan dengan teliti sebelum pemasangan dan operasi.
- Ensure all wiring is correctly polarized and securely connected to prevent damage to the controller, battery, or solar panels.
- Always connect the battery to the controller first, and disconnect the solar panels first when disassembling the system.
- Jangan melebihi vol input maksimumtage or current ratings of the controller.
- Pasang pengawal di kawasan yang mempunyai pengudaraan yang baik, jauh daripada bahan mudah terbakar dan cahaya matahari langsung.
- Wear appropriate personal protective equipment (PPE) during installation, including eye protection and gloves.
3. Kandungan Pakej
- Go Power! GP-PWM-10 solar controller
4. Ciri-ciri Produk
- Adjustable for Lithium, AGM, GEL, and Lead Acid batteries.
- Memaparkan voltage, semasa dan peratustage kapasiti bateri.
- USB port for charging portable electronics, such as cell phones and tablets.
- Paparan digital lampu latar yang mudah dibaca.
5. Spesifikasi
| Ciri | Spesifikasi |
|---|---|
| Model | GP-PWM-10-FM |
| Jenama | Pergi Kuasa |
| Jenis Paparan | LCD dengan lampu latar |
| Wattage | 180 watt |
| Voltage | 12 Volt |
| bahan | plastik |
| warna | Hitam |
| Dimensi Produk | 3.94 x 1.14 x 4.02 inci |
| Berat Barang | 8 auns |
| UPC | 839085002629 |
6. Persediaan
6.1. Pengenalan Komponen
The image displays the front panel of the Go Power! GP-PWM-10-FM Digital Solar Controller. It features a large backlit LCD screen showing various parameters such as solar input, battery charge level, voltage (V), and current (kAh). Below the screen are two control buttons labeled 'A' and 'B'. The bottom section shows connection points for solar panels and battery, along with the 'Go Power!' logo and 'MAXIMUM POWER BOOST TECHNOLOGY'.
6.2. Arahan Pendawaian
- Sambung ke Bateri: First, connect the controller to your battery bank. Ensure correct polarity (positive to positive, negative to negative). This allows the controller to detect the battery voltage dan jenis.
- Connect to Solar Panels: Next, connect your solar panels to the controller. Again, observe correct polarity. The controller will begin regulating the charge from the panels to the battery.
- Tolok Kawat: The controller can handle up to #6 AWG wire. Ensure appropriate wire gauge is used for your system to minimize power loss and ensure safety.
Note: Always connect the battery to the charge controller before connecting the solar panels. Disconnect solar panels before disconnecting the battery.
6.3. Pemilihan Jenis Bateri
The GP-PWM-10-FM is adjustable for Lithium, AGM, GEL, and Lead Acid batteries. Refer to the controller's interface or accompanying quick start guide to select the appropriate battery type for your system. Correct battery type selection is crucial for optimal charging and battery longevity.
7. Arahan Operasi
7.1. Paparan Digital
The backlit digital display provides real-time information about your solar charging system. It typically shows:
- Bateri Voltage (V): Vol semasatage of your battery bank.
- Charging Current (kAh): The current flowing from the solar panels to the battery.
- Battery State of Charge (%): An estimated percentage of your battery's capacity.
- Solar Input Indicator: An icon indicating active solar charging.
- Battery Type Indicator: Shows the currently selected battery type (SEALED, AGM, FLOODED).
7.2. Pengecasan USB
The integrated USB port allows for convenient charging of small electronic devices. Connect your device's USB cable to the controller's USB port. The USB charging function operates independently of the main battery charging process.
7.3. Control Buttons (A & B)
The 'A' and 'B' buttons are used to navigate through the display menus and adjust settings. Consult the detailed product manual for specific button functions related to battery type selection and other configurable parameters.
8. Penyelenggaraan
- Pembersihan tetap: Keep the controller's display and casing clean and free from dust and debris. Use a soft, dry cloth.
- Pemeriksaan Sambungan: Periodically inspect all wiring connections to ensure they are tight and free from corrosion. Loose connections can lead to power loss or system malfunction.
- Keadaan Persekitaran: Ensure the controller is not exposed to extreme temperatures or moisture beyond its operating specifications.
9. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Tiada paparan/Matikan kuasa | Loose battery connection, discharged battery, blown fuse. | Check battery connections, charge battery, inspect and replace fuse if necessary. |
| Bateri tidak dicas | No solar input (e.g., shade, night), loose solar panel connection, incorrect battery type setting. | Ensure panels are in direct sunlight, check solar panel wiring, verify battery type setting. |
| USB not charging devices | Device not compatible, low battery voltage, faulty USB cable. | Try a different device/cable, ensure battery is sufficiently charged. |
10. Waranti dan Sokongan
For detailed warranty information, technical support, or to purchase replacement parts, please refer to the official Go Power! webtapak atau hubungi bahagian perkhidmatan pelanggan mereka. Simpan resit pembelian anda untuk tuntutan waranti.
