WEN 4208T 2.3-Amp Tekan Gerudi Atas Bangku 8-Inci 5-Kelajuan

1. Pengenalan

The WEN 4208T 2.3-Amp 8-Inch 5-Speed Benchtop Drill Press is designed for precision drilling through various materials including metal, wood, and plastics. This compact yet powerful tool features a rigid frame constructed from cast iron for stability and accuracy. Its induction motor with ball bearings ensures smooth and balanced performance, even at high speeds. The 1/2-inch JT33 chuck offers versatility with a wide range of bits, and the worktable can bevel up to 45 degrees left and right for angled drilling operations. Predrilled holes in the base allow for secure mounting to a workbench or stand, and the slotted table accommodates clamps and vises for effective workholding.

2. Maklumat Keselamatan

WARNING: Always disconnect the electrical supply before performing any adjustments, maintenance, or when lifting the pulley cover to prevent accidental startup and potential injury.

• Read and understand the operating manual before use.
• Sentiasa pakai cermin mata keselamatan.
• Do not wear gloves, neckties, or loose clothing that could become entangled in moving parts.
• Pastikan bahan kerja berada dalam keadaan selamatamped ke meja.
• Keep guards in place during operation.

3. Komponen Selesaiview

The WEN 4208T drill press features several key components designed for ease of use and precision:

• 1/2-inch Keyed Chuck: Securely holds various drill bits.
• Onboard Key Storage: Conveniently located on the side of the drill press to keep the chuck key accessible.
• Operasi 5-Kelajuan: Adjustable pulley system allows for speeds of 740, 1100, 1530, 2100, and 3140 RPM.
• Locking Depth Stop: Enables accurate and repeatable drilling depths up to 2 inches.
• Beveling Worktable: The 6-1/2 x 6-1/2 inch worktable can be adjusted and tilted up to 45 degrees left and right for angled drilling.
• Cast Iron Base: Provides stability and includes bolt holes for mounting.

Detailed diagram highlighting key features and components of the WEN 4208T Drill Press.

4. Persediaan

4.1 Perhimpunan

The WEN 4208T drill press requires minimal assembly. Ensure all components are present and free from damage before beginning. The main components include the base, column, worktable, and head assembly. The chuck is typically installed by tapping it onto the spindle. Refer to the included manual for detailed step-by-step assembly instructions.

4.2 Pemasangan

For optimal stability and safety, it is recommended to mount the drill press securely to a workbench or stand using the predrilled holes in the cast iron base. Use appropriate hardware for your mounting surface.

4.3 Chuck and Key Storage

The 1/2-inch keyed chuck is designed for easy bit changes. The chuck key can be stored in the integrated holder on the side of the drill press head, ensuring it is always within reach and not misplaced.

View of the 1/2-inch keyed chuck and the convenient onboard key storage location.

5. Arahan Operasi

5.1 Pelarasan Kelajuan

The WEN 4208T offers 5 different speeds (740, 1100, 1530, 2100, 3140 RPM) by adjusting the belt position on the motor and spindle pulleys. A guide inside the pulley cover indicates the correct belt configuration for each speed and recommended speeds for different materials and drill bit sizes. Always disconnect power before adjusting the belt.

5.2 Pelarasan Kedalaman

The drill press features an easy-to-read, locking linear depth stop. To set the desired drilling depth, loosen the locking nut, adjust the depth stop to the required measurement (up to 2 inches of spindle travel), and then tighten the locking nut. This ensures accurate and repeatable drilling operations.

View of the depth stop mechanism, allowing for precise control over drilling depth.

5.3 Pelarasan Meja Kerja

The 6-1/2 x 6-1/2 inch worktable can be adjusted for height and can bevel up to 45 degrees left or right. To adjust the height, loosen the table locking handle and slide the table to the desired position, then re-tighten. For angled drilling, loosen the bevel locking mechanism and tilt the table to the desired angle, using the integrated scale for reference, then secure it.

Detail of the worktable's bevel adjustment, showing the angle scale for precise settings.

6. Penyelenggaraan

Regular maintenance ensures the longevity and optimal performance of your WEN 4208T drill press.

• Pembersihan: Keep the drill press clean and free of dust and debris. Wipe down surfaces with a dry cloth after each use.
• Pelinciran: Periodically lubricate moving parts as recommended in the full user manual to ensure smooth operation.
• Pemeriksaan Tali Pinggang: Regularly check the drive belt for wear, cracks, or tension. Replace if necessary and ensure proper tension for optimal speed transfer.
• Penjagaan Chuck: Keep the chuck jaws clean and lightly oiled to prevent rust and ensure proper gripping of drill bits.

7. Penyelesaian masalah

If you encounter issues with your drill press, consider the following common troubleshooting steps:

• Motor not starting: Check power connection, ensure the safety key is engaged, and verify the power switch is in the ON position.
• Getaran atau bunyi yang berlebihan: Inspect the drive belt for proper tension and wear. Ensure the drill press is securely mounted and all fasteners are tight.
• Inaccurate drilling: Verify the worktable is securely locked and the drill bit is properly seated in the chuck. Check for any play in the spindle.
• Difficulty changing speeds: Ensure the motor is disengaged and the belt tension is released before attempting to move the belt between pulleys.

For more detailed troubleshooting, refer to the complete user manual or contact WEN customer support.

8. Spesifikasi

9. Waranti dan Sokongan

The WEN 4208T Benchtop Drill Press comes with a 2-year warranty for residential use and a 90-day commercial warranty. For technical support, parts, or warranty claims, please contact WEN customer service. Contact information is typically found in the product manual or on the manufacturer's webtapak.