pengenalan
The Steelcase Reply chair is designed for comfort and support during long periods of sitting. Its high-performance mechanism provides various adjustments to ensure an ergonomic experience tailored to your needs. This manual will guide you through the setup, operation, and maintenance of your chair.
Maklumat Keselamatan
Penting: Always read and follow these safety guidelines to prevent injury and ensure proper use of your Steelcase Reply chair.
- Sentiasa pasang kerusi mengikut arahan yang diberikan.
- Jangan melebihi kapasiti berat maksimum 300 paun.
- Keep the chair on a stable surface to prevent tipping.
- Be cautious when adjusting the chair's mechanisms to avoid injury.
Persediaan dan Pelarasan Awal
Your Steelcase Reply chair arrives mostly assembled. The following steps detail how to make initial adjustments for optimal comfort.
1. Pelarasan Ketinggian Tempat Duduk
Proper seat height ensures your feet are flat on the floor and your upper and lower legs form a 90-degree angle, preventing pressure points under your thighs.
- To raise the seat: Lift the handle located under the seat while slightly lifting your weight from the seat.
- To lower the seat: Remain seated and lift the same handle.

Image: Steelcase Reply chair in an office setting, illustrating its design and ergonomic features.
2. Pelarasan Kedalaman Tempat Duduk
Adjusting the seat depth helps distribute your weight across your legs and avoids pressure points behind your knees.
- Lift the handle under the seat while sliding the seat forwards or backwards to your preferred depth.
- Slightly lift your weight from the seat to ease the adjustment.
3. Back Height / Lumbar Adjustment
The adjustable back height ensures proper lumbar support, promoting a healthy back curve.
- While seated, reach behind the backrest and grasp the lumbar support area.
- Slide the backrest up or down to position the lumbar support in the curve of your lower back.

Image: Close-up of the Steelcase Reply chair's mesh back and armrest, highlighting the adjustable lumbar support area.
4. Armrest Adjustments (Height, Width, Depth, Pivot)
Armrests support your arms and shoulders, reducing fatigue. The Reply chair's armrests offer multi-dimensional adjustments.
- Pelarasan Ketinggian: Press the button on the side of the armrest while sliding it up or down to your desired height.
- Pelarasan Lebar: Turn the wing screw located under the armrest and pull the armrest closer to or further away from the seat.
- Depth and Pivot Adjustment: Simply slide the armrest pad forwards, backwards, or pivot it left or right to your preferred position.
5. Tilt Tension Adjustment
Adjust the tilt tension to feel balanced and supported while sitting upright, and to recline effortlessly.
- Turn the handle located under the seat (usually on the right side) forwards to tighten the tension.
- Turn the handle backwards to ease the tension.
6. Multi-Position Back Lock and Upright Back Lock
This feature allows you to lock the backrest in an upright position or in one of three reclined positions.
- While sitting at your desired recline angle, operate the lever (usually on the left side under the seat) to lock the backrest in place.
7. Seat Angle Adjustment (Perch Forward)
For users who prefer to perch forward, this adjustment opens the angle between your thighs and abdomen.
- Activate the lever (refer to your chair's specific controls) to adjust the seat angle.
Video Guide: Steelcase Reply Chair Features
This video demonstrates the various adjustment features of the Steelcase Reply chair, including seat height, seat depth, back height, tilt tension, and armrest adjustments, to help you customize your seating experience.
Penyelenggaraan
To ensure the longevity and appearance of your Steelcase Reply chair, follow these simple maintenance guidelines:
- Pembersihan: Spot clean the fabric seat and mesh back as needed. Use a mild soap and water solution with a soft cloth. Avoid harsh chemicals or abrasive cleaners.
- Pemeriksaan biasa: Periodically check all screws and connections to ensure they are tight. Tighten if necessary.
- Kastor: Pastikan roda-roda itu bersih daripada serpihan (rambut, habuk) untuk memastikan penggelekannya lancar.
Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenama | Kotak keluli |
| Nama Model | 466160MT5F17 |
| warna | Hitam |
| Dimensi Produk | 22.5"D x 26"W x 46.75"H |
| Gaya Belakang | Belakang Jaring |
| Ciri Khas | Boleh laras |
| Cadangan Berat Maksimum | 300 paun |
| bahan | Textile, Foam |
| Perhimpunan | Requires assembly (minimal) |
| Berat Barang | 40 paun |
| Pergerakan Pangkalan Perabot | Pusing |
Waranti dan Sokongan
For warranty information, customer support, or to purchase replacement parts, please visit the official Steelcase website or contact their customer service directly. You may also refer to your purchase documentation for specific warranty details.
Sokongan dalam talian: www.steelcase.com





