pengenalan
This manual provides essential information for the safe and effective operation, setup, and maintenance of your Telwin Technomig 210 Dual Synergic Inverter MIG/MAG Welding Machine. This advanced welding unit is designed for versatile use, offering both MIG/MAG and inverter A-wire capabilities with synergistic control for optimized welding parameters.
Maklumat Keselamatan Penting
Welding operations involve significant risks. Always adhere to the following safety guidelines to prevent injury or damage.
- Kejutan elektrik: Welding equipment uses high voltage. Ensure proper grounding. Do not touch live electrical parts. Wear dry welding gloves.
- Asap dan Gas: Welding produces fumes and gases that can be hazardous. Work in a well-ventilated area. Use local exhaust ventilation or respirators if necessary.
- Sinar Arka: Arc rays can cause eye and skin burns. Always wear a welding helmet with appropriate shade filter and protective clothing.
- Kebakaran dan Letupan: Sparks, hot slag, and hot metal can cause fires. Keep flammable materials away from the welding area. Have a fire extinguisher readily available.
- Terbakar: Hot metal and equipment can cause severe burns. Wear protective clothing, including long sleeves, pants, and welding gloves.
- bunyi bising: Welding can produce loud noise. Wear hearing protection.
- Silinder: Gas cylinders contain gas under high pressure. Handle with care. Secure cylinders to prevent falling.
Always consult local safety regulations and standards before operating the welding machine.
Produk Selesaiview
The Telwin Technomig 210 Dual Synergic is a sophisticated inverter welding machine designed for MIG/MAG welding. It features a synergistic control system that simplifies parameter setting, making it suitable for both experienced welders and beginners.
Komponen Utama
- Panel Kawalan: Digital display and knobs for setting welding parameters.
- Pengumpan Kawat: Mechanism for feeding welding wire.
- Sambungan Obor: Point for connecting the MIG/MAG torch.
- Tanah Clamp Sambungan: Point for connecting the ground clamp.
- Sambungan Gas: Inlet for shielding gas.
- Suis kuasa: Suis hidup/Mati.
- Kabel kuasa: For connecting to the main power supply.
Ciri Panel Kawalan
The control panel allows precise adjustment of welding parameters. The synergistic function automatically sets optimal wire speed and voltage based on material thickness and wire type.
Rajah 1: Depan view of the Telwin Technomig 210 Dual Synergic welding machine, showing the main unit, welding torch, and ground clamp.
Rajah 2: Terperinci view of the control panel, highlighting the digital display and adjustment knobs for synergistic welding settings.
Persediaan dan Pemasangan
Sambungan Kuasa
- Ensure the power supply matches the machine's requirements (230 Volt, 2 kW).
- Connect the power cable to a properly grounded electrical outlet.
- Verify the power switch is in the "OFF" position before connecting.
Gas Cylinder Connection (for MIG/MAG)
- Secure the appropriate shielding gas cylinder (e.g., Argon, CO2, or Argon/CO2 mix) to a cylinder cart or wall.
- Attach a pressure regulator to the cylinder valve.
- Connect the gas hose from the regulator to the gas inlet on the welding machine.
- Open the cylinder valve slowly and adjust the gas flow rate on the regulator according to welding requirements.
Welding Wire Installation
- Open the wire feeder compartment.
- Install the correct size and type of welding wire spool onto the spindle.
- Thread the wire through the wire feeder mechanism, ensuring it passes through the drive rollers and into the torch liner.
- Adjust the drive roller pressure to prevent wire slippage or deformation.
Obor dan Tanah Clamp Sambungan
- Connect the MIG/MAG torch to the designated connection point on the front panel.
- Sambungkan tanah clamp cable to the ground terminal.
- Pasang tanah tanahamp securely to the workpiece, ensuring good electrical contact.
Arahan Operasi
Operasi Asas
- Hidupkan suis kuasa utama.
- Select the desired welding process (MIG/MAG).
- Choose the wire type and diameter on the control panel.
- Select the material thickness to be welded. The synergistic system will automatically suggest optimal voltage dan kelajuan wayar.
- Make fine adjustments to voltage or wire speed if necessary based on arc sound and weld appearance.
Mod Sinergik
The synergistic mode simplifies welding by automatically setting the optimal parameters. Once you select the wire type, diameter, and material thickness, the machine adjusts the voltage and wire speed proportionally. This feature is particularly useful for achieving consistent, high-quality welds.
Welding Technique
- Penyediaan: Clean the workpiece thoroughly to remove rust, paint, or grease.
- Permulaan Arka: Position the torch nozzle close to the workpiece. Press the torch trigger to initiate the arc and wire feed.
- Kelajuan Perjalanan: Maintain a consistent travel speed to ensure proper penetration and bead formation.
- Torch Angle: Hold the torch at an angle of approximately 10-15 degrees in the direction of travel (push angle) for most MIG/MAG applications.
- Arc Length: Maintain a stable arc length. The synergistic system helps in achieving this.
- Penamatan: Release the torch trigger to stop welding. Allow the weld pool to solidify under gas shielding.
Penyelenggaraan
Penyelenggaraan tetap memastikan jangka hayat dan prestasi optimum mesin kimpalan anda.
Cek Harian
- Inspect the welding cables, torch, and ground clamp untuk kerosakan.
- Check gas connections for leaks.
- Ensure the wire feeder rollers are clean and free of debris.
Cek Mingguan/Bulanan
- Clean the inside of the machine using dry compressed air to remove dust and metal particles. Ensure the machine is disconnected from power.
- Inspect the torch liner for blockages or wear. Replace if necessary.
- Check the condition of the contact tip and gas nozzle. Replace worn parts.
- Verify the tightness of all electrical connections.
Penyimpanan
Store the welding machine in a dry, clean environment, protected from dust and extreme temperatures.
Menyelesaikan masalah
This section addresses common issues you might encounter. For problems not listed here, contact Telwin customer support.
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Tiada Arka | Tiada kuasa untuk mesin | Check power connection, circuit breaker. |
| Tiada Arka | Sambungan tanah yang lemah | Pastikan tanah clamp is securely attached to clean metal. |
| Tiada Suapan Wayar | Kili dawai kusut atau kosong | Check wire spool, replace if empty. |
| Tiada Suapan Wayar | Drive rollers not engaged or too loose | Laraskan tekanan roller pemacu. |
| Keliangan dalam Kimpalan | Insufficient shielding gas | Check gas cylinder, flow rate, and gas hose for leaks. |
| Keliangan dalam Kimpalan | Bahan kerja yang tercemar | Bersihkan benda kerja dengan teliti sebelum mengimpal. |
| Arka Tidak Stabil | Parameter yang salah | Laraskan voltage and wire speed using synergistic settings. |
| Arka Tidak Stabil | Worn contact tip | Gantikan petua kenalan. |
Spesifikasi Teknikal
Model: Telwin Technomig 210 Dual Synergic (TE-816052)
- Pengeluar: TELWIN
- Nombor Bahagian: TE-816052
- Dimensi Produk: 52 x 40 x 25.5 cm
- Berat: 12.3 kg
- Sumber Kuasa: AC (Arus Ulang-alik)
- Voltage: 230 Volt
- Wattage: 2 kW
- Komponen yang Disertakan: Telwin Inverter MIG/MAG Welding Machine, Torch, Ground Clamp.
- warna: hijau
- gaya: Bujang
- Tarikh Pertama Tersedia: 15 Januari 2020
Waranti dan Sokongan
For warranty information, technical support, or service inquiries, please refer to the official Telwin website or contact your authorized Telwin dealer. Keep your purchase receipt as proof of purchase.
Sumber Dalam Talian: Visit the official Telwin website for updated manuals, FAQs, and product information.
Hubungi: For direct support, refer to the contact details provided with your product packaging or on the Telwin official webtapak.
