Manual Arahan Tukul Perobohan Scheppach AB1600

pengenalan

The Scheppach AB1600 Demolition Hammer is a powerful and robust tool designed for heavy-duty demolition tasks. With its high impact force and durable construction, it is an invaluable aid for masonry work, concrete breaking, and other demanding applications. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your AB1600 Demolition Hammer.

Figure 1: The Scheppach AB1600 Demolition Hammer, shown with the included pointed and flat chisels.

Arahan Keselamatan

Sentiasa patuhi langkah keselamatan berikut untuk mengelakkan kecederaan dan kerosakan pada alat:

• Alat Pelindung Diri (PPE): Always wear safety glasses, hearing protection, and heavy-duty gloves when operating the demolition hammer. Steel-toed boots are also recommended.
• Kawasan Kerja: Ensure the work area is well-lit and clear of obstructions. Keep bystanders and pets away from the operating area.
• Keselamatan Elektrik: Before connecting the tool to a power source, ensure the voltage matches the tool's requirements. Use a residual current device (RCD) for added protection. Do not operate in wet conditions.
• Bahan Kerja Selamat: Always ensure the material being worked on is stable and cannot shift unexpectedly.
• Cengkaman yang betul: Kekalkan cengkaman yang kukuh pada alat dengan kedua-dua tangan semasa operasi.
• Elakkan melampaui batas: Do not overreach or lose your balance. Maintain proper footing and balance at all times.
• Keadaan alat: Periksa alat dan aksesori untuk kerosakan sebelum setiap penggunaan. Jangan gunakan jika rosak.
• Chisel Installation: Ensure chisels are correctly and securely installed before starting the tool.
• Getaran: Prolonged use can cause vibration-related injuries. Take regular breaks and use anti-vibration gloves if available.

Kandungan Pakej

Selepas membongkar, sahkan bahawa semua komponen ada dan tidak rosak:

• Tukul Perobohan Scheppach AB1600
• 1 x Pointed Chisel (Ø30mm hexagonal shank)
• 1 x Flat Chisel (Ø30mm hexagonal shank)
• Beg Pembawa Logam
• Manual Arahan

Figure 2: The Scheppach AB1600 Demolition Hammer and its accessories neatly stored within the robust metal carrying case.

Persediaan

Pemasangan Pahat

1. Ensure the demolition hammer is unplugged from the power source.
2. Clean the hexagonal shank of the chisel and the tool holder to remove any dust or debris.
3. Pull back the locking sleeve on the tool holder.
4. Insert the chisel into the tool holder, rotating it slightly until it clicks into place.
5. Release the locking sleeve. Tug on the chisel to ensure it is securely locked. It should not pull out easily.

Figure 3: The demolition hammer with a pointed chisel correctly installed, ready for use.

Rajah 4: Satu terperinci view of the hexagonal tool holder, designed for quick and secure chisel changes.

Arahan Operasi

The Scheppach AB1600 is designed for demolition work. Follow these steps for effective operation:

1. Penyediaan: Ensure the chisel is correctly installed and the work area is clear. Wear all necessary PPE.
2. Sambungan Kuasa: Connect the power cable to a suitable and grounded power outlet (230V, 50Hz).
3. Memulakan Alat: Grip the main handle and the auxiliary D-handle firmly. Press the trigger switch to start the hammer action.
4. Perobohan: Apply steady, downward pressure to the tool, guiding the chisel into the material. Allow the hammer's impact force to do the work. Do not force the tool.
5. Chisel Selection:
   • Pointed Chisel: Ideal for initial breaking, creating holes, or breaking up hard, dense materials like concrete or rock.
   • Flat Chisel: Suitable for breaking larger sections, channeling, or removing tiles and plaster.
6. Menghentikan Alat: Release the trigger switch to stop the hammer action.
7. Sejukkan Diri: For prolonged use, allow the tool to cool down periodically to prevent overheating.

Figure 5: An operator demonstrating the use of the Scheppach AB1600 to break concrete, highlighting the tool's ergonomic design for effective downward force.

Figure 6: The demolition hammer in action, breaking up concrete on a floor, showcasing its efficiency in various demolition scenarios.

Penyelenggaraan

Penyelenggaraan tetap memastikan jangka hayat dan prestasi optimum tukul perobohan anda.

• Pembersihan: After each use, clean the tool thoroughly to remove dust, debris, and concrete residue. Use a dry cloth or compressed air. Do not use water or solvents.
• Pelinciran: The tool's internal mechanism requires periodic lubrication. Refer to the specific lubrication points indicated in the detailed manual (if available) or consult a qualified service technician. A lubricant bottle is supplied, but lubricant itself is not included. Use appropriate hammer grease.
• Chisel Care: Keep chisels clean and sharp. Dull chisels reduce efficiency and increase strain on the tool.
• Berus Karbon: Periodically check the carbon brushes for wear. Replace them when they are worn down to their limit, as specified in the full manual.
• Storan: Store the demolition hammer and its accessories in the metal carrying case in a dry, secure location, away from direct sunlight and extreme temperatures.

Menyelesaikan masalah

Spesifikasi

Waranti dan Sokongan

The Scheppach AB1600 Demolition Hammer comes with a Waranti pengilang selama 5 tahun. For warranty claims, technical support, or spare parts, please contact your retailer or the official Scheppach service center. Spare parts availability is guaranteed for 7 years.

For more information, visit the official Scheppach webtapak atau rujuk butiran hubungan yang diberikan bersama dokumentasi pembelian anda.