PAC OS-2X Radio Replacement Interface with OnStar Retention User Manual for Select GM Class II Vehicles

1. Pengenalan

The PAC OS-2X Radio Replacement Interface is designed to allow the installation of an aftermarket radio into select General Motors (GM) Class II vehicles while retaining essential factory features. This interface ensures the continued functionality of OnStar, warning chimes, and other vehicle-specific features that would otherwise be lost when replacing the factory radio.

This manual provides detailed instructions for the proper installation, operation, and maintenance of your PAC OS-2X interface. Please read all instructions thoroughly before beginning installation.

PAC OS-2X Radio Replacement Interface module and wiring harness

Figure 1: PAC OS-2X Radio Replacement Interface module and associated wiring harness. This image shows the main components included in the package, highlighting the interface module and the various connectors for vehicle and aftermarket radio integration.

2. Maklumat Keselamatan

Always disconnect the vehicle's negative battery terminal before beginning any electrical installation to prevent short circuits and damage.
Pastikan semua sambungan kukuh dan berpenebat dengan betul untuk mengelakkan pintasan elektrik.
Refer to your vehicle's service manual for specific wiring diagrams and disassembly instructions.
If you are unsure about any part of the installation process, consult a qualified car audio technician.
Do not modify the interface module or wiring harness. Unauthorized modifications can void the warranty and cause damage.
Keep the interface module away from moisture and extreme temperatures.

3. Kandungan Pakej

Verify that all items are present before proceeding with the installation:

PAC OS-2X Interface Module
Vehicle Specific Wiring Harness
Aftermarket Radio Connection Harness
Manual Pengguna (dokumen ini)

4. Setup and Pre-Installation

Baca Manual: Thoroughly read this instruction manual and your aftermarket radio's manual before starting.
Alat Kumpul: Collect necessary tools such as wire strippers, crimpers, electrical tape, multimeter, and panel removal tools.
Putuskan Sambungan Bateri: Putuskan sambungan terminal negatif bateri kenderaan.
Alih Keluar Radio Kilang: Carefully remove the factory radio from the dashboard. Refer to your vehicle's service manual for specific instructions.
Kenal pasti Pendawaian Kenderaan: Familiarize yourself with the vehicle's factory wiring harness.

5. Arahan Pemasangan

Follow these steps carefully to install the PAC OS-2X interface:

Connect Aftermarket Radio Harness: Connect the wires from the aftermarket radio's harness to the corresponding wires on the PAC Aftermarket Radio Connection Harness. Match wire colors and functions (e.g., constant 12V, accessory 12V, ground, speaker wires). Solder and heat shrink, or use high-quality crimp connectors for secure connections.
Connect Vehicle Specific Harness: Plug the PAC Vehicle Specific Wiring Harness into the factory radio harness connectors in the vehicle's dashboard.
Connect Interface Module: Plug the Aftermarket Radio Connection Harness and the Vehicle Specific Wiring Harness into the PAC OS-2X Interface Module. Ensure all connectors are fully seated.
Connect Antenna Adapter (if required): If your aftermarket radio requires an antenna adapter, connect it now.
Connect Steering Wheel Control (SWC) (if applicable): If your aftermarket radio supports steering wheel controls and you wish to retain them, connect the SWC output wire from the PAC module to the SWC input of your aftermarket radio. Refer to your radio's manual for specific SWC wiring.
Kefungsian Ujian: Before reassembling the dashboard, temporarily reconnect the vehicle's negative battery terminal. Turn on the ignition and test the aftermarket radio's basic functions (power, sound, fader/balance). Verify that OnStar functionality and all warning chimes are working correctly.
Komponen Selamat: Once all functions are verified, disconnect the battery again. Secure the PAC OS-2X module and all wiring harnesses behind the dashboard, ensuring they do not interfere with any moving parts or pinch points.
Pasang semula Papan Pemuka: Reinstall the aftermarket radio and reassemble the dashboard components.
Final Battery Connection: Sambung semula terminal bateri negatif.

6. Operasi

The PAC OS-2X interface operates automatically once installed. Its primary function is to translate vehicle data signals for the aftermarket radio and maintain factory features.

6.1 OnStar Retention

The interface retains full OnStar functionality. When an OnStar call is initiated or received, the audio will be routed through the vehicle's speakers, and the aftermarket radio will mute or switch to the OnStar audio source, depending on the radio's capabilities.

6.2 Warning Chimes

All factory warning chimes (e.g., door ajar, seatbelt, key in ignition) are retained and will sound through the vehicle's speakers as they did with the factory radio.

6.3 Steering Wheel Controls (Optional)

If connected and configured, the interface allows the factory steering wheel audio controls to operate the aftermarket radio. Refer to your aftermarket radio's manual for programming instructions if necessary.

7. Penyelenggaraan

The PAC OS-2X interface is designed for maintenance-free operation. No user-serviceable parts are inside the module.

Ensure all wiring connections remain secure. Loose connections can lead to intermittent functionality.
Keep the area around the interface module free from excessive dust or moisture.
Do not attempt to open or repair the module.

8. Penyelesaian masalah

If you experience issues with your PAC OS-2X interface, refer to the following table:

Masalah	Kemungkinan Punca	Penyelesaian
Aftermarket radio has no power.	Sambungan kuasa longgar. Blown fuse in vehicle or radio. Incorrect wiring of constant or accessory power.	Periksa semua sambungan kuasa dan tanah. Inspect vehicle and radio fuses. Verify wiring against diagrams.
No sound from aftermarket radio.	Loose speaker connections. Aftermarket radio not properly configured. kenderaan amplampu tidak menyala (jika berkenaan).	Check all speaker wire connections. Ensure radio's fader/balance is centered. Sahkan amplifier turn-on wire connection.
OnStar not working or no audio.	Interface module not receiving power. Incorrect connection to OnStar audio input (if applicable).	Verify power to the PAC module. Ensure OnStar audio connections are correct.
Warning chimes are missing or incorrect.	Interface module not receiving proper data. Speaker for chimes not connected.	Check all connections to the PAC module and vehicle harness. Ensure the chime speaker (if separate) is connected.
Steering Wheel Controls not functioning.	SWC wire not connected or connected incorrectly. Aftermarket radio requires programming for SWC.	Verify SWC wire connection between PAC module and radio. Refer to your aftermarket radio's manual for SWC programming.

9. Spesifikasi

Ciri	Perincian
Nombor Model	OS-2X (Item model number: OS2X-SL)
Jenama	PAC
Keserasian	Select GM Class II Vehicles
Ciri-ciri Terpelihara	OnStar, Warning Chimes, Retained Accessory Power (RAP), Steering Wheel Controls (with compatible radio)
bahan	Kuprum, Polivinil Klorida (PVC)
Dimensi Item (L x W x H)	9 x 9 x 2 inci
Berat Barang	0.96 paun (lebih kurang 15.4 auns)
Jenis Penyambung	OEM/Deutsch DT
UPC	609098814478, 606523105729

10. Waranti dan Sokongan

10.1 Maklumat Waranti

The PAC OS-2X interface comes with a Waranti Pengeluar 1 Tahun from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, neglect, or unauthorized modification.

For warranty claims, please retain your proof of purchase and contact PAC customer support.

10.2 Sokongan Teknikal

If you require technical assistance or have questions regarding the installation or operation of your PAC OS-2X interface, please contact PAC technical support. Before contacting support, please ensure you have read this manual thoroughly and performed basic troubleshooting steps.

Contact information for PAC can typically be found on their official webtapak atau pada pembungkusan produk.

	PAC C2R-GM11b GM Radio Replacement Interface Installation Guide Comprehensive installation guide for the PAC C2R-GM11b, a radio replacement interface for GM GMLAN 11-bit vehicles without OnStar. This interface retains factory warning chimes, turn signal indicators, and the Retained Accessory Power (RAP) feature, while enabling aftermarket stereo installation.
	Antara Muka Penggantian Radio GM1A-RT dengan Pengekalan Telematik - PAC Panduan terperinci untuk Antara Muka Penggantian Radio PAC GM1A-RT, meliputi pemasangan, ciri, pendawaian, tetapan boleh laras dan kemas kini perisian tegar untuk kenderaan General Motors terpilih dengan Bas Data Kelas II.
	PAC GM1A-RST Radio Replacement Interface Installation and Features Comprehensive guide for the PAC GM1A-RST radio replacement interface, detailing installation, features, steering wheel control programming, and PC app adjustments for select General Motors vehicles with Class II Data-Bus.
	Panduan Pemasangan Antara Muka Kawalan Roda Stereng & Penggantian Radio RP5-GM32 Detailed installation guide for the PAC RP5-GM32 Radio Replacement and Steering Wheel Control Interface, designed for General Motors vehicles with OnStar retention. Includes wiring, programming, and testing instructions.
	PAC OS2-GM32X Radio Replacement Interface with OnStar Retention for Select GM Vehicles Detailed guide for the PAC OS2-GM32X interface, enabling radio replacement in select General Motors vehicles while retaining factory features like OnStar, warning chimes, and BOSE® amplifier. Includes wiring, installation, and testing instructions.
	Manual Pengguna Antara Muka Kawalan Radio GM3A-RSTX dan Kawalan Roda Stereng Manual ini menyediakan arahan untuk memasang dan menggunakan antara muka GM3A-RSTX, penggantian radio dan antara muka kawalan stereng dengan pengekalan OnStar untuk kenderaan General Motors. Ia meliputi pendawaian, pengaturcaraan dan ciri seperti mengekalkan fungsi kilang dan fungsi dwi arahan.

PAC OS-2X