1. Pengenalan
This manual provides detailed instructions for the installation, operation, and maintenance of your Toro Pressure Compensated Precision Spray 10-H Sprinkler Nozzle. This nozzle is designed to deliver efficient and precise water distribution for your irrigation system.
Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of the product.
2. Produk Lebihview
The Toro Precision Spray 10-H Nozzle is engineered for water efficiency and uniform coverage. Key features include:
- Pressure Compensation: Maintains consistent flow and spray pattern across varying system pressures.
- Precision Spray: Delivers a uniform 1 inch per hour (25mm/hr) precipitation rate, matching soil infiltration.
- Integrated Screen: Helps prevent clogging from debris.
- Pembinaan Tahan Lama: Made for long-lasting performance in outdoor environments.
Image 1: The Toro Pressure Compensated Precision Spray 10-H Sprinkler Nozzle. This image shows the compact design of the nozzle, highlighting its integrated screen and the precision spray head.
3. Persediaan dan Pemasangan
- Penyediaan: Ensure the irrigation system is turned off and depressurized before beginning installation.
- Remove Old Nozzle (if applicable): Carefully unscrew the existing sprinkler nozzle from the riser.
- Clean Riser: Inspect the sprinkler riser for any debris or dirt. Clean thoroughly to ensure a proper seal.
- Pasang Muncung Baharu: Screw the Toro Precision Spray 10-H Nozzle onto the sprinkler riser by hand. Do not overtighten, as this can damage the nozzle or riser threads. Tighten until snug.
- Laraskan Corak Semburan: Once installed, turn on the irrigation system briefly to check the spray pattern. The 10-H nozzle typically provides a half-circle (180-degree) spray pattern. Adjust the arc and radius as needed by rotating the nozzle collar or top, if adjustable. Refer to your sprinkler body's instructions for specific adjustment methods.
- Semak Kebocoran: Observe for any leaks around the nozzle connection. If leaks occur, turn off the system, unscrew the nozzle, re-clean threads, and re-install, ensuring a snug fit.
4. Arahan Operasi
The Toro Precision Spray 10-H Nozzle operates automatically as part of your irrigation system. Once installed and adjusted, it will deliver water according to your system's programmed schedule.
- Jadual Penyiraman: Set your irrigation controller to a schedule appropriate for your landscape's needs, considering soil type, plant requirements, and local climate.
- Pemerhatian: Periodically observe the nozzle during operation to ensure the spray pattern remains consistent and there are no obstructions.
5. Penyelenggaraan
Regular maintenance helps ensure the longevity and efficiency of your sprinkler nozzle.
- Pembersihan Skrin: The integrated screen can accumulate debris over time. If you notice reduced flow or an irregular spray pattern, turn off the system, unscrew the nozzle, and carefully remove and clean the screen under running water. Reinstall the screen and nozzle.
- Musim sejuk: In regions subject to freezing temperatures, ensure your irrigation system, including nozzles, is properly winterized according to your system manufacturer's guidelines to prevent freeze damage.
- Pemeriksaan Fizikal: Periodically check nozzles for any physical damage, cracks, or wear. Replace damaged nozzles promptly to maintain system efficiency.
6. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Reduced water flow or irregular spray. | Clogged nozzle screen or orifice. | Turn off water, remove nozzle, clean screen and orifice. |
| Water leaking from base of nozzle. | Nozzle not tightened properly or damaged threads. | Turn off water, unscrew, inspect threads, re-tighten snugly. Replace if threads are damaged. |
| Tiada air dari muncung. | System pressure too low, or complete blockage. | Check system pressure. Inspect for major blockages in the riser or supply line. |
7. Spesifikasi
| Atribut | Nilai |
|---|---|
| Nombor Model | O-T-10-HP |
| Jenama | Toro |
| Kadar Kerpasan | 1 inch/hour (25mm/hr) |
| Dimensi Produk (L x W x H) | 1 x 1 x 1 inci |
| Berat Barang | 1.28 auns |
| UPC | 090258054894 |
8. Waranti dan Sokongan
Untuk maklumat jaminan dan sokongan teknikal, sila rujuk laman web rasmi Toro weblaman web atau hubungi khidmat pelanggan Toro secara langsung. Simpan resit pembelian anda sebagai bukti pembelian.
Pengeluar: Toro