NEC NP-V260 DLP Projector Instruction Manual

1. Pengenalan

This manual provides essential information for the safe and efficient operation of your NEC NP-V260 DLP Projector. Please read these instructions thoroughly before using the projector and retain them for future reference. This projector is designed for presenting high-definition content with 2600 ANSI lumens brightness.

2. Persediaan

2.1 Membongkar dan Kandungan

Carefully remove the projector and all accessories from the packaging. Verify that all components are present:

• NEC NP-V260 DLP Projector
• Kord Kuasa
• Alat Kawalan Jauh (jika disertakan)
• Manual Pengguna (dokumen ini)

2.2 Penempatan Projektor

Place the projector on a stable, level surface or mount it securely. Ensure adequate ventilation around the projector to prevent overheating. Maintain a suitable distance from the screen for the desired image size.

2.3 Kuasa Penyambung

1. Sambungkan kord kuasa ke salur masuk AC projektor.
2. Palamkan hujung kord kuasa yang lain ke dalam salur keluar elektrik yang dibumikan.

2.4 Menyambungkan Sumber Input

The NEC NP-V260 supports various input sources. Connect your device to the appropriate port:

• HDMI: Untuk video dan audio digital definisi tinggi.
• USB: For connecting USB devices or for firmware updates.
• Network (Wired & Wireless): For network control and content streaming, if supported by your model.

2.5 Hidupkan Kuasa Awal

Press the power button on the projector or remote control to turn on the unit. The power indicator light will change color, and the projector lamp akan menerangi.

2.6 Pelarasan Fokus dan Zum

This image displays the top panel of the NEC NP-V260 projector. Visible features include the focus and zoom rings on the lens, the NEC logo, a warning label for lamp type NP18LP, and the control panel with menu navigation buttons, source selection, and power button.

Adjust the focus ring around the lens until the projected image is sharp and clear. Use the zoom ring to adjust the image size to fit your screen.

3. Arahan Operasi

3.1 Kawalan Asas

The projector features an on-board control panel. The main controls include:

• Butang Kuasa: Menghidupkan atau mematikan projektor.
• Butang Sumber: Cycles through available input sources (HDMI, USB, Network).
• Butang Menu: Mengakses menu Paparan Atas Skrin (OSD).
• Butang Navigasi (Atas/Bawah/Kiri/Kanan): Used to navigate through OSD menus.
• Butang Masukkan: Mengesahkan pilihan dalam menu OSD.
• Butang Keluar: Exits the current OSD menu or returns to the previous level.

3.2 Menavigasi Paparan Pada Skrin (OSD)

Tekan ke Menu button to open the OSD. Use the navigation buttons to highlight options and the Masuk button to select. Adjust settings such as picture mode, aspect ratio, and keystone correction.

3.3 Melaraskan Tetapan Gambar

Within the OSD, navigate to the 'Picture' or 'Image' menu to adjust:

• Kecerahan: Controls the overall lightness or darkness of the image.
• Kontras: Adjusts the difference between the lightest and darkest parts of the image.
• warna: Modifies the intensity of colors.
• Warna: Adjusts the balance between red and green colors (NTSC only).
• Ketajaman: Enhances or softens image edges.
• Nisbah Aspek: Selects the display format (e.g., 4:3, 16:9, Auto).

3.4 Shutting Down the Projector

Press the power button twice (or as indicated by the on-screen prompt) to safely shut down the projector. Allow the projector to cool down completely before unplugging or moving it.

4. Penyelenggaraan

4.1 Membersihkan Lensa

Lap kanta projektor dengan lembut menggunakan kain lembut dan tidak berbulu yang direka khas untuk permukaan optik. Jangan gunakan pembersih yang kasar atau daya yang berlebihan.

4.2 Membersihkan Penapis Udara

Regularly clean the air filter to ensure proper ventilation and prevent overheating. Refer to the projector's specific instructions for filter removal and cleaning. A clogged filter can significantly reduce lamp life and projector performance.

4.3 Lamp Penggantian

Projektor lamp (Type: NP18LP) has a finite lifespan. When the lamp indicator light illuminates or the image becomes dim, it is time to replace the lamp. Always use genuine NEC replacement lamps. Refer to the detailed lamp replacement procedure in the full user manual for safety precautions and steps.

4.4 Penyimpanan

When not in use for extended periods, store the projector in a cool, dry place, protected from dust and extreme temperatures. Use the original packaging or a protective case if available.

5. Penyelesaian masalah

If you encounter issues with your projector, consult the following common troubleshooting steps:

• Tiada gambar: Ensure the power cord is securely connected, the projector is turned on, and the correct input source is selected. Check the connection cable between the projector and the source device.
• Imej Kabur: Adjust the focus ring on the lens. Ensure the projector is placed at an appropriate distance from the screen.
• Tiada Bunyi: Verify that the audio cable is connected (if using an analog input), the volume is turned up on both the projector and the source device, and the correct audio input is selected. HDMI connections typically carry audio automatically.
• Projektor Terlalu Panas: Ensure air vents are not blocked. Clean the air filter. Operate the projector in a well-ventilated area.
• Lamp Lampu Penunjuk Hidup: This indicates the lamp is nearing its end of life or has failed. Replace the lamp (Type: NP18LP).

For more complex issues, contact NEC customer support or a qualified service technician.

6. Spesifikasi

7. Waranti dan Sokongan

7.1 Maklumat Waranti

The NEC NP-V260 DLP Projector is covered by a limited warranty. Please refer to the warranty card included with your product or visit the official NEC webtapak untuk terma dan syarat terperinci. Simpan bukti pembelian anda untuk tuntutan waranti.

7.2 Sokongan Pelanggan

For technical assistance, service, or further inquiries, please contact NEC customer support. You can find contact information and support resources on the official NEC Display Solutions webtapak: www.necdisplay.com/support