OSRAM 64440 Halogen 12V 50W Bulb Instruction Manual

pengenalan

This manual provides essential information for the safe and effective use of your OSRAM 64440 (58675) Halogen 12V 50W bulb. Please read these instructions carefully before installation and retain them for future reference.

Maklumat Keselamatan

• Pemutusan Kuasa: Always ensure the power supply to the fixture is turned off before installing, removing, or handling the bulb.
• Tempoh Menyejukkan Diri: Halogen bulbs operate at high temperatures. Allow the bulb to cool completely before touching it to prevent burns.
• Elakkan Hubungan Langsung: Jangan sentuh bahagian kaca mentol dengan tangan kosong. Minyak dari kulit anda boleh menyebabkan tompok panas, yang boleh menyebabkan kerosakan mentol pramatang. Gunakan kain atau sarung tangan bersih semasa mengendalikannya.
• Betul Voltage dan Wattage: Pastikan volum mentoltage (12V) dan wattage (50W) match the requirements of your lighting fixture. Using an incorrect bulb can cause damage or fire.
• Pelupusan yang betul: Buang mentol terpakai mengikut peraturan tempatan.
• Penggunaan Dalaman: This bulb is designed for indoor use in appropriate fixtures.

Produk Selesaiview

The OSRAM 64440 (58675) is a 12-volt, 50-watt halogen bulb featuring a T4 shape and a GY6.35 bi-pin base. It provides 910 lumens of clear light with a color temperature of 3000 Kelvin, offering a warm white illumination. The bulb has a rated lifespan of approximately 2000 hours and is designed for universal burning position.

Persediaan dan Pemasangan

1. Matikan Kuasa: Locate the light fixture's power switch and turn it off. For added safety, turn off the circuit breaker supplying power to the fixture.
2. Biarkan sejuk: If replacing an existing bulb, allow the old bulb to cool down completely before touching it.
3. Keluarkan Mentol Lama (jika berkenaan): Gently pull the old bi-pin bulb straight out from its socket. Do not twist.
4. Handle New Bulb: Using a clean cloth or gloves, carefully remove the new OSRAM 64440 bulb from its packaging. Avoid touching the glass envelope with bare hands.
5. Masukkan Mentol Baharu: Align the two pins of the new bulb with the holes in the GY6.35 socket. Gently push the bulb straight into the socket until it is fully seated. Do not force it.
6. Pulihkan Kuasa: Turn the circuit breaker back on, then turn on the light fixture's switch to test the new bulb.

Operasi

Once installed, the OSRAM 64440 halogen bulb operates by simply turning on the power switch of the connected fixture. This bulb is designed for instant full brightness. Ensure the fixture is rated for 12V and 50W halogen bulbs.

Penyelenggaraan

• Pembersihan: If the bulb's glass becomes dirty, turn off the power and allow it to cool. Gently wipe the glass with a clean, dry, lint-free cloth. Do not use liquid cleaners.
• Penggantian: The bulb has an average rated life of 2000 hours. Replace the bulb when it burns out or if its light output significantly diminishes. Follow the installation steps for replacement.

Menyelesaikan masalah

• Mentol Tidak Menyala:
  • Periksa sama ada bekalan kuasa ke lekapan dihidupkan.
  • Pastikan mentol diletakkan dengan betul di dalam soket.
  • Verify that the bulb's voltage dan wattage match the fixture's requirements.
  • Test with a known working bulb to rule out a fixture issue.
  • The bulb may have reached the end of its lifespan and requires replacement.
• Kelipan Mentol:
  • Ensure the bulb is securely seated in the socket.
  • Periksa pendawaian longgar dalam lekapan (rujuk juruelektrik bertauliah jika tidak pasti).
  • If used with a dimmer, ensure the dimmer is compatible with halogen bulbs and rated for the total wattage.

Spesifikasi

Waranti dan Sokongan

For warranty information or technical support regarding your OSRAM 64440 halogen bulb, please refer to the packaging or contact OSRAM customer service directly. You may also contact the retailer from whom the product was purchased for assistance.

For more information, you can visit the official OSRAM store: Kedai OSRAM di Amazon.