1. Pengenalan
This manual provides essential information for the safe and efficient installation, operation, and maintenance of the Schneider Electric Osisense XS130B3PAL2 Inductive Proximity Sensor. Please read this manual thoroughly before using the product.
Figure 1: Schneider Electric Osisense XS130B3PAL2 Inductive Proximity Sensor. A detailed view of the cylindrical brass housing, M30 threading, and pre-wired cable connection.
2. Maklumat Am
The Schneider Electric Osisense XS130B3PAL2 is a cylindrical inductive proximity sensor designed for general-purpose industrial applications. It features a robust nickel-plated brass housing and a PPS sensing face, ensuring durability and reliable performance in challenging environments.
Ciri-ciri Utama:
- model: XS130B3PAL2
- Jenis Sensor: Penderia Kehampiran Induktif
- Perumahan: Cylindrical, M30, L45mm, Nickel-plated Brass
- Sensing Face: PPS
- Sensing Range (Sn): 15 mm
- Bekalan Voltage: 12-24V DC
- Jenis Output: 3-wire, NO (Normally Open), PNP
- Sambungan: Pre-wired cable (2 meters length)
- Penilaian Perlindungan: IP65, IP68, IP69K
- Suhu Operasi: -25°C hingga +70°C
- Petunjuk: Annular LED for status visualization
- Pensijilan: E2, CSA, UL
3. Arahan Keselamatan
Sentiasa patuhi garis panduan keselamatan berikut untuk mengelakkan kecederaan dan kerosakan pada peralatan:
- Disconnect power before installation, wiring, or maintenance.
- Pastikan pembumian yang betul untuk mengelakkan kejutan elektrik.
- Jangan melebihi bekalan yang ditetapkan voltage (12-24 V DC).
- Avoid exposing the sensor to corrosive substances or extreme mechanical stress beyond its ratings.
- Installation and wiring should be performed by qualified personnel only.
- Sahkan semua sambungan selamat sebelum menggunakan kuasa.
- This device features double insulation for enhanced protection against electric shocks.
4. Pemasangan
The XS130B3PAL2 sensor is designed for flush mounting and can be installed directly onto a metallic surface or support.
Langkah Pemasangan:
- Identify the desired mounting location. Ensure sufficient clearance for the sensor body and cable.
- Drill a hole of appropriate diameter (Ø 30 mm) for the M30 x 1.5 thread.
- Insert the sensor into the drilled hole.
- Secure the sensor using the two provided nuts on the external thread. Tighten firmly but do not overtighten to avoid damaging the housing.
- Ensure the sensing face is flush with the mounting surface for optimal performance.
Nota: For non-flush mounting applications, consult the product datasheet for specific mounting distances and considerations to prevent mutual interference between sensors or with metallic objects.
5. Pendawaian
The XS130B3PAL2 is a 3-wire, PNP, Normally Open (NO) sensor with a 2-meter pre-wired cable. Follow the wiring diagram below:
- Kawat coklat: Connect to +12-24 V DC (Power Supply Positive)
- Kawat Biru: Connect to 0 V DC (Power Supply Negative / Ground)
- Kawat Hitam: Connect to Load (Output Signal)
Ensure all connections are correct and secure before applying power. Incorrect wiring can damage the sensor or connected equipment.
6. Operasi
Once properly installed and wired, the sensor is ready for operation. When a metallic object enters the sensing range (15 mm), the sensor's output will switch states.
Sensing Indication:
The sensor features an annular LED indicator. This LED illuminates when a target object is detected within the sensing range, providing visual confirmation of operation and aiding in configuration and troubleshooting.
Prinsip Penderiaan:
Inductive proximity sensors generate an electromagnetic field. When a metallic object enters this field, it causes a change in the field, which the sensor detects, triggering its output. The nickel-plated brass housing provides magnetic shielding, enhancing precision and immunity to external magnetic disturbances.
7. Penyelenggaraan
The Schneider Electric Osisense XS130B3PAL2 sensor is designed for minimal maintenance. Regular inspection can help ensure long-term reliable operation.
- Pembersihan: Periodically clean the sensing face to remove dust, dirt, or debris that may accumulate and affect performance. Use a soft, damp kain. Jangan gunakan pembersih atau pelarut yang melelas.
- Pemeriksaan Kabel: Check the cable for any signs of damage, such as cuts, abrasions, or kinks. Replace the sensor if the cable is damaged.
- Keselamatan Pemasangan: Ensure the sensor remains securely mounted. Vibrations or impacts can loosen mounting nuts over time.
- Keadaan Persekitaran: Verify that the operating environment remains within the specified temperature range (-25°C to +70°C) and that the IP protection ratings are not compromised.
8. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Sensor not detecting object |
|
|
| LED tidak menyala |
|
|
| Intermittent detection |
|
|
9. Spesifikasi
| Pengeluar | Schneider Electric |
| Nombor Model | XS130B3PAL2 |
| Jenis Sensor | Penderia Kehampiran Induktif |
| Housing Dimensions (L x W x H) | 13.1 x 9.5 x 4.2 cm |
| Berat badan | 20 gram |
| Bahan Perumahan | Nickel-plated Brass |
| Sensing Face Material | PPS |
| Jenis Pemasangan | Flush, M30 x 1.5 thread, Pole mount |
| Nominal Sensing Distance (Sn) | 15 mm |
| Bekalan Voltage | 12-24V DC |
| Jenis Output | 3-wire, NO (Normally Open), PNP |
| Sambungan | Pre-wired cable (2 meters) |
| Penilaian Perlindungan | IP65, IP68, IP69K |
| Julat Suhu Operasi | -25°C hingga +70°C |
| Pensijilan | E2, CSA, UL |
| Penggunaan yang Disyorkan | Industrial automation and machine control |
| Peranti Serasi | Sistem keselamatan |
10. Waranti dan Sokongan
Information regarding specific warranty terms and conditions for the Schneider Electric Osisense XS130B3PAL2 Inductive Proximity Sensor is not provided in this document. For detailed warranty information and technical support, please refer to the official Schneider Electric webtapak atau hubungi perkhidmatan pelanggan mereka secara langsung.
Components included: Product and instructions (French not guaranteed). Spare parts availability: Information unavailable on spare parts.
