1. Pengenalan
This manual provides detailed instructions for the installation, operation, and maintenance of your PERRY 1TI TE541 MOON SOFT TOUCH Digital Built-in Thermostat. Please read this manual thoroughly before installation and use to ensure proper functioning and to prevent damage.
The PERRY 1TI TE541 is a 230V digital thermostat designed for built-in installation, offering precise temperature control for heating and cooling systems. It features two temperature levels, an anti-freeze function, and a backlit display.
2. Maklumat Keselamatan
- Installation must be performed by a qualified electrician and in compliance with local electrical regulations.
- Disconnect power to the thermostat and the system it controls before any installation, maintenance, or wiring work.
- Do not expose the thermostat to direct water spray or excessive humidity.
- Ensure the power supply matches the thermostat's requirements (230V AC, 50-60Hz).
- Do not attempt to repair or modify the thermostat yourself. Contact qualified service personnel.
3. Kandungan Pakej
Sahkan bahawa semua komponen terdapat dalam pakej:
- PERRY 1TI TE541 Digital Built-in Thermostat
- Manual Arahan (dokumen ini)
- Three interchangeable front panels for plate compatibility
4. Produk Lebihview
The PERRY 1TI TE541 thermostat features a clear LCD display and intuitive soft-touch buttons for easy operation.
Rajah 1: Depan view of the PERRY 1TI TE541 Digital Thermostat. The display shows "COMFORT", "ON", "20.8°C" (current temperature), "Set 1 21:00" (set temperature and time), and buttons for "Menù", Up, Down, and Power/Mode.
Elemen Paparan:
- Suhu Semasa: Memaparkan suhu persekitaran.
- Tetapkan Suhu: Menunjukkan suhu yang dikehendaki.
- Mod Pengendalian: Shows current mode (e.g., Comfort, Anti-freeze).
- Status Geganti: An icon (e.g., flame for heating) indicates if the heating/cooling system is active.
- Masa: Memaparkan masa semasa.
Butang Kawalan:
- Butang Menu: Accesses settings and programming options.
- Butang Anak Panah Atas: Increases temperature, navigates menu options.
- Butang Anak Panah Bawah: Decreases temperature, navigates menu options.
- Butang Kuasa / Mod: Turns the thermostat on/off or switches between operating modes.
5. Pemasangan
The PERRY 1TI TE541 is designed for built-in installation. Ensure power is disconnected before proceeding.
5.1 Sambungan Elektrik
- Turn off the main power supply to the circuit where the thermostat will be installed.
- Open the thermostat casing dengan berhati-hati.
- Connect the 230V AC, 50-60Hz power supply wires to the designated terminals. Refer to the wiring diagram provided inside the thermostat casing or in a separate wiring guide (if applicable).
- Connect the heating/cooling system control wires to the relay terminals as per the system requirements.
- Pastikan semua sambungan selamat dan terlindung dengan betul.
5.2 Pemasangan
- Prepare a standard electrical wall box for built-in installation.
- Carefully insert the thermostat into the wall box, ensuring wires are not pinched.
- Secure the thermostat to the wall box using the provided screws.
- Attach the desired front panel. The thermostat includes three different front panels for compatibility with various plate designs.
- Close the thermostat casing.
5.3 Hidupkan Kuasa Awal
Once installation is complete, restore the main power supply. The thermostat display should illuminate, indicating it is powered on.
6. Persediaan
6.1 Menetapkan Masa dan Tarikh
Upon first power-on or after a power outage, you may need to set the current time and date. Refer to the "Menu" options for time/date settings. Use the Up/Down arrow buttons to adjust values and the Menu button to confirm.
6.2 Tetapan Lampu Latar
The display backlight can be set to be fixed (always on) or temporary (illuminates when a button is pressed and then turns off after a short period). Access this setting through the Menu options and select your preferred mode.
7. Arahan Operasi
The PERRY 1TI TE541 offers various modes and settings for optimal climate control.
7.1 Setting Temperature Levels
The thermostat supports two main temperature levels, typically referred to as Comfort and Economy, in addition to an anti-freeze setting.
- Suhu Keselesaan: The desired temperature during active periods.
- Economy Temperature: A lower temperature for energy saving during inactive periods.
- Anti-freeze Temperature: A minimum temperature (e.g., 5°C) to prevent freezing when the system is off or in standby.
To adjust these settings, press the Menu button and navigate to the temperature setting options. Use the Up/Down arrows to change the values within the regulation range of 5°C to 37.7°C.
7.2 Operating Modes (Winter/Summer)
The thermostat can operate in Winter (heating) or Summer (cooling) mode. This is often indicated as EST/INV (Estate/Inverno). Access the mode selection through the Menu or a dedicated button (refer to the specific icon on your thermostat if available).
7.3 Relay Status Indication
The display includes an icon (e.g., a flame for heating, a snowflake for cooling) that illuminates when the thermostat's relay is active, indicating that the heating or cooling system is currently running to reach the set temperature.
7.4 Telephone Command Input
The thermostat features an input for telephone commands, allowing remote activation or deactivation of certain functions. Consult the wiring diagram and specific instructions for connecting and configuring this feature with a compatible telephone interface.
7.5 Temperature Setpoint Lock
To prevent unauthorized changes to the temperature settings, the thermostat includes a setpoint lock feature. This function can be activated via the Menu to secure your desired temperature range.
8. Penyelenggaraan
- Pembersihan: Wipe the thermostat's exterior with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays.
- Pemeriksaan: Periodically check for any loose connections or signs of damage. If any issues are found, disconnect power and contact a qualified technician.
- Bateri (jika berkenaan): This model is powered by 230V AC and does not require batteries for primary operation.
9. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Paparan kosong | No power supply; loose wiring. | Check circuit breaker. Ensure thermostat is correctly wired to 230V AC. |
| Thermostat not controlling heating/cooling | Incorrect mode selected (Winter/Summer); set temperature not reached; wiring issue. | Verify operating mode. Adjust set temperature. Check relay status indicator. Consult a qualified electrician for wiring inspection. |
| Bacaan suhu tidak tepat | Thermostat located near a heat source/draft; sensor malfunction. | Ensure thermostat is not exposed to direct heat or cold drafts. If problem persists, contact support. |
| Butang tidak bertindak balas | Gangguan perisian sementara; kerosakan fizikal. | Try cycling power to the thermostat. If unresponsive, contact support. |
10. Spesifikasi
- model: 1TITE541
- Jenama: PERRY
- Bekalan Kuasa: 230V AC, 50-60Hz
- Jenis Paparan: LCD
- Jenis Kawalan: Sentuhan Lembut
- Julat Peraturan Suhu: 5°C hingga 37.7°C
- Jenis Pemasangan: terbina dalam
- Dimensi: 14 x 16 x 8 cm (anggaran, mengikut data produk)
- Berat: 230 g (anggaran)
- ciri-ciri: 2 temperature levels, anti-freeze, fixed/timed backlight, relay status indication, telephone command input, temperature setpoint lock.
11. Waranti dan Sokongan
For warranty information, please refer to the documentation included with your product packaging or visit the official PERRY weblaman web. Untuk sokongan teknikal atau pertanyaan perkhidmatan, sila hubungi peruncit anda atau jabatan khidmat pelanggan pengilang.
