pengenalan
This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your Adcraft WB-100 Low Volume Manual Fill Hot Water Dispenser Boiler. Please read this manual thoroughly before initial use and retain it for future reference.
Imej: Depan view of the Adcraft WB-100 Hot Water Dispenser Boiler, showcasing its stainless steel construction, water level gauge, spigot, and temperature control knob.
Arahan Keselamatan Penting
To reduce the risk of fire, electric shock, or injury, always follow basic safety precautions when using electrical appliances. This appliance heats water to high temperatures; exercise extreme caution.
- Baca semua arahan sebelum digunakan.
- Jangan sentuh permukaan panas. Gunakan pemegang atau tombol.
- Untuk melindungi daripada bahaya elektrik, jangan celupkan kabel, palam, atau alat ke dalam air atau cecair lain.
- Pengawasan rapi diperlukan apabila sebarang perkakas digunakan oleh atau berhampiran kanak-kanak.
- Cabut plag dari soket apabila tidak digunakan dan sebelum membersihkan. Biarkan sejuk sebelum memakai atau menanggalkan bahagian, dan sebelum membersihkan perkakas.
- Jangan kendalikan sebarang perkakas dengan kord atau palam yang rosak, atau selepas perkakas tidak berfungsi atau rosak dalam apa jua cara.
- Penggunaan lampiran aksesori yang tidak disyorkan oleh pengilang perkakas boleh menyebabkan kecederaan.
- Jangan gunakan di luar rumah.
- Jangan biarkan kord tergantung di tepi meja atau kaunter, atau menyentuh permukaan panas.
- Jangan letakkan pada atau berhampiran gas panas atau penunu elektrik, atau dalam ketuhar yang dipanaskan.
- Sentiasa pasangkan plag pada perkakas terlebih dahulu, kemudian pasangkan kord ke dalam salur keluar dinding. Untuk memutuskan sambungan, matikan mana-mana kawalan kepada "mati", kemudian tanggalkan palam dari alur keluar dinding.
- Jangan gunakan perkakas untuk kegunaan selain daripada yang dimaksudkan.
Persediaan dan Penggunaan Pertama
- Membongkar: Carefully remove the hot water dispenser from its packaging. Retain packaging materials for future storage or transport.
- Pemeriksaan: Inspect the unit for any signs of damage. If damaged, do not operate and contact your supplier.
- penempatan: Place the unit on a stable, level, heat-resistant surface. Ensure there is adequate clearance around the unit for ventilation. The non-slip rubber feet provide stability.
- Pembersihan Awal: Before first use, wash the interior of the dispenser and the lid with warm, soapy water. Rinse thoroughly and dry.
- Sambungan Kuasa: Ensure the power switch is in the "OFF" position. Plug the 3-foot power cord (NEMA 5-15 plug) into a grounded 120V AC electrical outlet. The unit requires 1350W and 11.25 Amps.
Arahan Operasi
- Pengisian Unit: Remove the lid and manually fill the dispenser with clean water. Do not fill above the "MAX" fill line indicated on the interior or water level gauge. The unit has a 100-cup (6.25 gallon) capacity.
- Mengamankan Tudung: Place the lid securely back onto the dispenser.
- Menghidupkan: Flip the illuminated power switch to the "ON" position. The switch will light up, indicating the unit is receiving power and beginning to heat.
- Menetapkan Suhu: Use the variable temperature control knob located at the base of the unit to select your desired water temperature. The range is from 85°F to 220°F.
- Proses Pemanasan: The unit will begin heating the water. The extra-large encapsulated heating element ensures fast and even heating. Monitor the water level gauge on the side of the unit.
- Mengeluarkan Air Panas: Once the desired temperature is reached, place a cup or container under the spigot. Push down the lever on the spigot to dispense hot water. Release the lever to stop the flow.
- Pengisian semula: If the water level becomes low, turn off the unit, unplug it, and allow it to cool slightly before refilling.
- Mengangkut: Use the cool-to-touch bakelite handles for safe transportation of the unit when empty or cool.
Imej: Jarak dekat view of the variable temperature control knob, allowing adjustment of water temperature between 85°F and 220°F.
Imej: Jarak dekat view of the dispensing spigot and the clear water level gauge, which allows monitoring of the water volume inside the boiler.
This hot water dispenser is suitable for preparing various hot beverages and foods, including tea, coffee, instant noodles, and soups. It can also be used to keep sauces like Au Jus or barbecue sauce warm.
Penjagaan dan Penyelenggaraan
Regular cleaning and maintenance will ensure the longevity and optimal performance of your Adcraft hot water dispenser.
- Pembersihan Harian:
- Sentiasa cabut plag unit dan biarkan ia sejuk sepenuhnya sebelum dibersihkan.
- Kosongkan sebarang air yang tinggal.
- Wash the interior and exterior stainless steel surfaces with a mild detergent and a soft cloth or sponge.
- Rinse thoroughly with clean water. Do not immerse the electrical base in water.
- Dry all surfaces completely before storing or next use.
- Mengurangkan: Over time, mineral deposits (limescale) may build up, especially in hard water areas.
- To descale, fill the unit with a solution of equal parts white vinegar and water.
- Heat the solution to approximately 150°F (65°C) and let it stand for 30-60 minutes. Do not boil.
- Drain the solution and rinse the interior several times with fresh water to remove any vinegar residue.
- Ulangi jika perlu.
- Storan: Store the clean and dry unit in a cool, dry place.
Menyelesaikan masalah
Sebelum menghubungi perkhidmatan pelanggan, sila rujuk isu dan penyelesaian biasa berikut:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Unit tidak panas. | Not plugged in; power switch off; circuit breaker tripped; faulty power cord/element. | Ensure unit is plugged in and power switch is ON. Check circuit breaker. If problem persists, contact qualified service personnel. |
| Water heats too slowly. | Limescale buildup; insufficient power supply. | Perform descaling procedure. Ensure unit is connected to a dedicated 120V outlet. |
| Air bocor dari keran. | Spigot not fully closed; damaged spigot seal. | Ensure spigot lever is fully released. If leaking continues, the spigot may need replacement or repair by a qualified technician. |
| Water level gauge unclear. | Deposit mineral pada tolok. | Clean the exterior of the gauge. If internal, descaling may help. |
For issues not listed here or if troubleshooting steps do not resolve the problem, please contact Adcraft customer support.
Spesifikasi Produk
- model: WB-100
- kapasiti: 100 Cups (approximately 6.25 Gallons)
- Bahan: Pembinaan keluli tahan karat
- Kuasa: 120V, 1350W, 11.25 Amps
- Jenis Palam: NEMA 5-15
- Julat Suhu: 85°F - 220°F (30°C - 104°C)
- Dimensi (L x W x H): 12.6 x 10.83 x 22.91 inci
- Berat: 1 Pound (approximate, unit weight only)
- Pensijilan: ETL Listed, ETL Sanitation, NSF
- Ciri Khas: Temperature Control, Water Level Indicator, Heat-resistant side handles, Illuminated power switch.
Waranti dan Sokongan
This Adcraft WB-100 Hot Water Dispenser Boiler is covered by the Adcraft One-Year Limited Warranty. This warranty covers defects in material and workmanship under normal use for a period of one year from the date of purchase.
For warranty claims, technical support, or to inquire about replacement parts, please contact Adcraft customer service. Please have your model number (WB-100) and proof of purchase available when contacting support.
Contact information for Adcraft can typically be found on their official webtapak atau pada pembungkusan produk.
