1. Pengenalan
Terima kasih kerana membeliasing the EGLO 82813A Sendo LED Dimmable Floor LampManual ini menyediakan maklumat penting untuk pemasangan, pengendalian dan penyelenggaraan lantai baharu anda yang selamat.ampSila baca arahan ini dengan teliti sebelum digunakan dan simpannya untuk rujukan pada masa hadapan.
2. Maklumat Keselamatan
- Keselamatan Elektrik: Always disconnect the power supply before installation, cleaning, or maintenance. Ensure the lamp is plugged into a properly grounded outlet.
- Keperluan mentol: l iniamp uses one A19 bulb, maximum 100-Watt (not included). Do not exceed the recommended wattage.
- Penggunaan Dalaman Sahaja: This product is UL approved for dry indoor locations. Do not use in wet or damp persekitaran.
- Perhimpunan: Assembly is required. Ensure all parts are securely fastened before connecting to power.
- Pengendalian: Kendalikan komponen kaca dengan berhati-hati untuk mengelakkan pecah.
- Amaran Proposisi 65: Produk ini mungkin mengandungi bahan kimia yang diketahui oleh State of California yang menyebabkan barah dan cacat lahir atau bahaya pembiakan yang lain.
3. Kandungan Pakej
Sahkan bahawa semua komponen ada dan tidak rosak sebelum memulakan pemasangan. Jika mana-mana bahagian hilang atau rosak, hubungi khidmat pelanggan.
- Light Fixture (includes base, pole, shade holder, and shade)
- Manual Arahan
Note: One A19 bulb (max 100W) is required and not included in the package.
4. Arahan Perhimpunan
Please follow these steps carefully for proper assembly. It is recommended to assemble the lamp on a soft, clean surface to prevent scratches.
- Buka Pembungkusan Komponen: Keluarkan semua bahagian dari bungkusan dengan berhati-hati dan letakkannya.
- Pasangkan Tiang ke Tapak: Screw the lower pole section into the lamp base until secure. Do not overtighten.
- Sambungkan Bahagian Kutub: If the pole comes in multiple sections, carefully screw them together, ensuring the electrical cord passes freely through.
- Pasang Pemegang Teduhan: Secure the shade holder to the top of the pole.
- Lampirkan Naungan: Place the crème fabric shade onto the shade holder and secure it according to the design (e.g., with a retaining ring).
- Pasang Mentol: Screw one A19 bulb (max 100W, not included) into the lamp soket.
Figure 4.1: Fully assembled EGLO Sendo Floor Lamp.
Rajah 4.2: Lamp dimensions for reference during assembly and placement.
5. Arahan Operasi
The EGLO 82813A Sendo Floor Lamp direka bentuk untuk operasi yang mudah.
- Sambungan Kuasa: Insert the power plug into a standard 120V AC wall outlet.
- Menghidupkan/Mematikan: Lamp features a push-button switch. Press the button to turn the lamp hidup atau mati.
- Fungsi Peredupan: l iniamp is dimmable and features a touch sensor for control. If using a dimmable bulb, the touch sensor on the lamp allows for adjusting light intensity. Consult your bulb's instructions for specific dimming compatibility.
Figure 5.1: EGLO Sendo Floor Lamp dalam suasana ruang tamu.
6. Penyelenggaraan
Penyelenggaraan berkala memastikan jangka hayat dan prestasi optimum peranti andaamp.
- Pembersihan: Putuskan sambungan lamp daripada kuasa sebelum membersihkan. Gunakan kain lembut dan kering untuk mengelapamp base and pole. For the fabric shade, use a lint roller or a soft brush to remove dust. Do not use abrasive cleaners or solvents.
- Penggantian mentol: Pastikan lamp is unplugged and the bulb has cooled completely before attempting to replace it. Unscrew the old bulb and screw in a new A19 bulb (max 100W).
- Pemeriksaan: Periodically check the power cord for any signs of damage. If the cord is damaged, discontinue use and contact a qualified electrician or the manufacturer.
7. Penyelesaian masalah
If you encounter issues with your EGLO Sendo Floor Lamp, rujuk kepada masalah dan penyelesaian biasa berikut:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Lamp tidak menyala. | Tiada kuasa ke saluran keluar. | Check the wall switch or circuit breaker. Test the outlet with another device. |
| Lamp tidak menyala. | Mentol longgar atau terbakar. | Cabut plag lamp, then tighten or replace the bulb. |
| Lamp berkelip-kelip. | Mentol longgar atau mentol yang tidak serasi. | Cabut plag lamp, tighten the bulb. Ensure you are using a compatible A19 bulb. If dimming, ensure the bulb is dimmable. |
| Dimming function not working. | Non-dimmable bulb installed. | Replace with a dimmable A19 bulb. |
8. Spesifikasi
| Ciri | Perincian |
|---|---|
| Nama Model | Sendo |
| Nombor Model | 82813A |
| Jenama | EGLO |
| Dimensi Produk | 12"D x 12"W x 13"H (Shade Height: 57 Inches, Overall Size: 70-Inch) |
| Berat Barang | 8 paun |
| Bahan Asas | Keluli Aloi |
| Bahan Teduh | Glass (Crème Fabric Shade mentioned in title, but specifications list Glass. Assuming fabric over glass or a specific component is glass.) |
| Warna shade | putih |
| Jenis Selesai | White / Brushed Aluminium |
| Pangkalan Mentol | E26 |
| Jenis Sumber Cahaya | A19 |
| Wat Serasi Maksimumtage | 100 Watt |
| Voltage | 120 Volt |
| Kaedah Kawalan | Touch / Push Button Switch |
| Ciri-ciri Mentol | Boleh dimalapkan (dengan mentol yang serasi) |
| Penggunaan Dalaman/Luar | Dalaman |
| Pensijilan | UL |
| Perhimpunan Diperlukan | ya |
9. Waranti dan Sokongan
EGLO products are manufactured to high-quality standards. For warranty information or technical support, please refer to the documentation included with your purchase or visit the official EGLO webtapak. Simpan bukti pembelian anda untuk sebarang tuntutan waranti.
For further assistance, you may contact EGLO customer service directly. Contact details can typically be found on the manufacturer's webtapak atau pada pembungkusan produk.