Manual Arahan Lampu Dinding atau Siling Nikita EGLO 86996A

pengenalan

This manual provides detailed instructions for the safe installation, operation, and maintenance of your EGLO 86996A Nikita Wall or Ceiling Light. Please read this manual thoroughly before installation and retain it for future reference.

The EGLO Nikita light fixture features a transitional design with a matte nickel finish and satin glass accents, suitable for both wall and ceiling mounting.

Maklumat Keselamatan Penting

AMARAN: Risiko renjatan elektrik. Putuskan kuasa pada kotak fius atau pemutus litar sebelum pemasangan atau servis.

Always consult a qualified electrician if you are unsure about the installation process. Ensure all wiring connections are secure and comply with local electrical codes.

Produk ini direka untuk kegunaan dalaman sahaja. Jangan dedahkan kepada kelembapan atau suhu yang melampau.

Amaran Proposisi 65: Produk ini mungkin mengandungi bahan kimia yang diketahui oleh Negeri California boleh menyebabkan kanser dan kecacatan kelahiran atau bahaya pembiakan yang lain. Sila semak undang-undang tempatan anda sebelum membeli.asing produk ini.

Apa yang ada dalam Kotak

• Light Fixture (EGLO 86996A Nikita)
• Installation Hardware (screws, wire nuts, mounting bracket) - (Standard components, may vary slightly)
• Manual Arahan

Nota: 1x100W Halogen bulb is tidak termasuk dan mesti dibeli secara berasingan.

Persediaan dan Pemasangan

This section outlines the general steps for installing the EGLO 86996A light fixture. Specific details may vary based on your electrical box and mounting surface. Always ensure power is OFF before beginning installation.

Alat Diperlukan (Tidak Termasuk):

• Pemutar skru (Phillips dan/atau Flathead)
• Pelucut Kawat
• Tang
• Pita Elektrik
• Cermin Mata Keselamatan

Langkah Pemasangan:

1. Matikan Kuasa: Locate the circuit breaker or fuse box that supplies power to the installation location. Turn off the power completely. Verify power is off using a voltage penguji.
2. Sediakan Permukaan Pemasangan: If replacing an existing fixture, carefully remove it. Ensure the electrical box is securely mounted and capable of supporting the fixture's weight.
3. Pasang Pendakap Pelekap: Secure the fixture's mounting bracket to the electrical box using the provided screws. Ensure it is firmly attached.
4. Buat Sambungan Elektrik:
   • Sambungkan wayar tanah tembaga hijau atau kosong from the fixture to the ground wire from the electrical box (usually bare copper or green). Secure with a wire nut.
   • Sambungkan wayar putih from the fixture to the white (neutral) wire from the electrical box. Secure with a wire nut.
   • Sambungkan wayar hitam from the fixture to the black (hot) wire from the electrical box. Secure with a wire nut.

   Ensure all wire nuts are tightly secured and no bare wire is exposed. Wrap connections with electrical tape for added security.
5. Pasang Lekapan: Carefully align the fixture with the mounting bracket and secure it in place using the provided screws. Ensure the fixture is flush against the wall or ceiling.
6. Pasang Mentol: Insert one 100W Halogen bulb (not included) into the socket. Do not exceed the maximum wattage.
7. Pulihkan Kuasa: Setelah pemasangan selesai dan semua sambungan selamat, hidupkan semula kuasa pada pemutus litar atau kotak fius.

Imej: Depan view of the EGLO 86996A Nikita Wall or Ceiling Light in matte nickel finish.

Image: The EGLO 86996A Nikita light fixture mounted on a blue wall, illustrating its up/down lighting effect.

Image: The EGLO 86996A Nikita light fixture integrated into a modern living room, demonstrating its aesthetic appeal.

Image: Dimensional drawing of the EGLO 86996A Nikita light, showing length (8.86"), width (3.15"), and height (4.92").

Operasi

The EGLO 86996A Nikita light fixture operates via a standard wall switch (not included) connected to your household electrical system. It is designed for 120 Volts AC power.

• Hidupkan/Mati Kuasa: Gunakan suis dinding untuk menghidupkan atau mematikan lekapan lampu.
• Jenis Mentol: This fixture requires one 100W Halogen bulb (not included). Halogen bulbs can generate significant heat.
• Boleh dimalapkan: The fixture is dimmable if connected to a compatible dimmer switch and using dimmable halogen bulbs.

Penyelenggaraan

Penyelenggaraan yang kerap memastikan ketahanan dan prestasi optimum lampu anda.

• Pembersihan: Before cleaning, ensure the power is turned off and the fixture has cooled down. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or glass.
• Penggantian mentol:
  1. Matikan kuasa pada lekapan pada pemutus litar.
  2. Benarkan mentol sejuk sepenuhnya sebelum menyentuhnya.
  3. Tanggalkan mentol lama dengan berhati-hati.
  4. Insert a new 100W Halogen bulb. Avoid touching the new halogen bulb directly with bare hands, as oils can reduce bulb life. Use a clean cloth or glove.
  5. Pulihkan kuasa.
• Pemeriksaan: Periodically check for any loose wiring or damaged components. If any damage is found, discontinue use and consult a qualified electrician.

Menyelesaikan masalah

If you encounter issues with your EGLO 86996A light fixture, refer to the following common troubleshooting steps:

Jika langkah-langkah ini tidak menyelesaikan masalah, hubungi khidmat pelanggan atau juruelektrik yang berkelayakan.

Spesifikasi

Maklumat Waranti

This product comes with a Manufacturer's Warranty. For specific details regarding coverage, duration, and claims process, please refer to the warranty documentation included with your purchase or contact EGLO customer support directly.

Sokongan Pelanggan

For further assistance, technical support, or inquiries regarding your EGLO 86996A Nikita Wall or Ceiling Light, please contact EGLO customer service.

You can often find contact information on the EGLO official webtapak atau melalui peruncit anda.

Sumber Dalam Talian: Lawati Kedai EGLO di Amazon

Video Produk