Parkside PES 200 B1 Electric Scraper User Manual

1. Pengenalan

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Parkside PES 200 B1 Electric Scraper. Please read these instructions carefully before using the device and keep them for future reference.

The Parkside PES 200 B1 is designed for removing stubborn residues such as wallpaper, adhesive, paint, silicone, and foam from various surfaces. It is also suitable for light wood carving tasks.

2. Arahan Keselamatan

Amaran Keselamatan Am:

• Sentiasa memakai peralatan pelindung diri (PPE) yang sesuai seperti cermin mata keselamatan, sarung tangan, dan perlindungan pendengaran.
• Pastikan kawasan kerja mempunyai pencahayaan yang baik dan bebas daripada halangan.
• Jauhkan kanak-kanak dan orang ramai semasa mengendalikan alat.
• Jangan kendalikan alatan kuasa dalam atmosfera yang mudah meletup, seperti di hadapan cecair mudah terbakar, gas atau habuk.
• Always disconnect the power plug from the socket before making any adjustments, changing accessories, or storing the tool.
• Jangan menyalahgunakan kord. Jangan sekali-kali menggunakan kord untuk membawa, menarik atau mencabut palam alat kuasa. Jauhkan kord daripada haba, minyak, tepi tajam atau bahagian yang bergerak.
• Maintain the tool with care. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the power tool’s operation.

Specific Safety Warnings for Electric Scrapers:

• Ensure the attachment is securely fastened before starting the tool.
• Be aware of hidden electrical wires or pipes when working on walls. Use a detector if necessary.
• Avoid applying excessive pressure; let the tool do the work.
• Do not touch the working end of the attachment during operation or immediately after, as it may be hot.

3. Produk Lebihview

3.1 Komponen

The Parkside PES 200 B1 Electric Scraper features a robust design for efficient material removal. Key components include:

• Stroke Rate Selection / On/Off Switch: Allows adjustment of the stroke rate and powers the device on or off.
• Rubberized Grip Area: Memberikan pengendalian yang selesa dan selamat.
• Berus Karbon: Essential motor components, designed for easy replacement.
• Quick-Change Mechanism for Tool Inserts: Enables fast and tool-free attachment changes.
• Guide Bearing: Supports the tool's movement.
• Cone/Plate Wheel: Internal drive component.
• Kipas: Untuk penyejukan motor.
• Housing Shell: Melindungi komponen dalaman.
• Power Cable (4m): Menyediakan ample capai.

Figure 1: Internal component diagram of the Parkside PES 200 B1 Electric Scraper. Labels indicate the Hubvorwahl/Ein-/Aus-Schalter (Stroke Rate Selection/On/Off Switch), Gummierter Griffbereich (Rubberized Grip Area), Kohlebürsten (Carbon Brushes), Schnellwechselmechanik für Werkzeugeinsätze (Quick-Change Mechanism for Tool Inserts), FührungsLager (Guide Bearing), Kegel/Tellerrad (Cone/Plate Wheel), Lüfterrad (Fan), Gehäuseschale (Housing Shell), and Netzleitung 4 m (Power Cable 4 m).

3.2 Included Attachments

The Parkside PES 200 B1 comes with 5 versatile attachments for various applications:

• Flat Spatula Attachment: Ideal for removing paint residues, silicone, and foams.
• Angled Knife/Scraper Attachment: Suitable for removing carpets, plaster residues, or unevenness.
• Flat Knife/Scraper Attachment: For removing carpets, felt, cork, plaster, adhesive, and plaster residues.
• Flat Chisel Attachment: For carving in wood.
• 13mm Gouge Attachment: Specifically for carving in softwoods.

Gambar 2: Lebihview of the 5 included attachments. From left to right: Spachtelaufsatz (flach) - Flat Spatula, Messer-/Schabaufsatz (gekröpft) - Angled Knife/Scraper, Messer-/Schabaufsatz (gerade) - Flat Knife/Scraper, Stechbeitelaufsatz (flach) - Flat Chisel, Geißfuß (13 mm) - 13mm Gouge.

4. Persediaan

4.1 Attaching/Changing Tool Inserts

1. Ensure the electric scraper is unplugged from the power source.
2. Locate the quick-change mechanism at the front of the tool.
3. To insert an attachment, align the base of the desired tool insert with the quick-change mechanism and push it firmly until it clicks into place.
4. To remove an attachment, pull back the quick-change collar (if present) or press the release button, then pull the attachment out.
5. Always ensure the attachment is securely seated before operating the tool.

5. Arahan Operasi

5.1 Menghidupkan/Mematikan

• To turn the tool ON, press the On/Off switch.
• Untuk mematikan alat, lepaskan suis Hidup/Mati.

5.2 Adjusting Stroke Rate

The PES 200 B1 offers three stroke rate settings for optimal performance on different materials:

• Tetapan 1: Approximately 6,500 strokes/min (for delicate surfaces or lighter removal tasks).
• Tetapan 2: Approximately 7,500 strokes/min (for general purpose removal).
• Tetapan 3: Approximately 8,500 strokes/min (for stubborn residues and robust materials).

Use the stroke rate selection switch to choose the appropriate setting before starting work. Experiment on a scrap piece of material to find the best setting for your task.

5.3 Working with the Scraper

1. Select the appropriate attachment for the material you are working on (refer to Section 3.2).
2. Pasangkan alat tersebut ke soket kuasa yang sesuai.
3. Hold the tool firmly with both hands, utilizing the rubberized grip area.
4. Place the attachment flat against the surface to be worked on.
5. Turn on the tool and apply gentle, even pressure. Allow the tool's vibrations to do the work.
6. Move the tool steadily across the surface, overlapping strokes slightly to ensure complete removal.
7. For wood carving, use the chisel or gouge attachments and apply controlled movements to shape the wood.
8. After use, turn off the tool and unplug it from the power source.

6. Penyelenggaraan

Regular maintenance ensures the longevity and optimal performance of your electric scraper.

6.1 Pembersihan

• Sentiasa cabut plag alat sebelum membersihkan.
• Clean the tool's housing with a soft, damp kain. Jangan gunakan bahan kimia yang keras atau pembersih yang kasar.
• Remove any debris or material buildup from the quick-change mechanism and around the attachments.
• Pastikan bukaan pengudaraan bersih untuk mengelakkan terlalu panas.

6.2 Penggantian Berus Karbon

The carbon brushes are wear parts and should be checked periodically. If the motor performance decreases or sparks become excessive, the carbon brushes may need replacement. This procedure should ideally be performed by a qualified technician or according to specific instructions provided with replacement brushes.

6.3 Penyimpanan

• Simpan alat tersebut di tempat yang kering, selamat, dan jauh daripada kanak-kanak.
• Ensure the power cable is neatly coiled and not kinked.
• Store attachments in a protective case to prevent damage and loss.

7. Penyelesaian masalah

8. Spesifikasi Teknikal

• model: Parkside PES 200 B1
• Input Kuasa: 200 Watt
• Kadar strok: 3-stage selectable (approx. 6,500 / 7,500 / 8,500 min^-1)
• Sumber Kuasa: AC
• Panjang kabel: lebih kurang 4 meter
• Pengeluar: Kompernass GmbH
• Nombor Bahagian: 64186
• warna: hijau
• Kelulusan: TÜV and GS approved

9. Waranti dan Sokongan

This Parkside PES 200 B1 Electric Scraper is manufactured with high-quality materials and undergoes strict quality controls. For warranty claims, please retain your proof of purchase.

For technical support, spare parts, or warranty inquiries, please contact the manufacturer or your local distributor. Refer to your purchase documentation for specific contact details.

Pengeluar: Kompernass GmbH

Note: Information regarding specific warranty periods and conditions may vary by region and retailer.