Kolpin Universal Gun/Saw Boot Bracket

1. Pengenalan

This manual provides detailed instructions for the installation, operation, and maintenance of your Kolpin Universal Gun/Saw Boot Bracket, Model 20200. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Produk Selesaiview

The Kolpin Universal Gun/Saw Boot Bracket is designed for secure attachment of Kolpin Gun Boot IV, 4.3, 6.0, Kolpin Stronghold Gun Boot L cases, and saw boots (sold separately) to ATVs or UTVs. Its versatile design allows for adjustment to multiple angle positions and fits various tubular steel racks or UTV frames.

2. Kandungan Pakej

Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:

• Kolpin Universal Gun/Saw Boot Bracket - 20200
• All necessary mounting hardware (bolts, nuts, washers, rubber coated ring)

3. Ciri-ciri Utama

• Keserasian: Fits Kolpin Gun Boot IV, 4.3, 6.0, Kolpin Stronghold Gun Boot L cases and saw boot only (sold separately).
• Fit Universal: Designed for most ATV tubular steel racks or UTV frames up to 2 inches diameter, including square tubing.
• Pembinaan Tahan Lama: All-metal constructed loop bracket ensures longevity and strength.
• Sudut boleh laras: Bracket can be adjusted to multiple angle positions between 0° and 45° for optimal positioning.
• Pegangan Selamat: Features a rubber-coated ring to securely hold your Gun Boot case.

4. Maklumat Keselamatan

Always prioritize safety when installing and using this product. Failure to follow these instructions could result in injury or damage to equipment.

• Ensure the bracket is securely fastened to your vehicle's rack or frame before mounting any boot.
• Do not exceed the weight capacity of your vehicle's rack system.
• Regularly inspect all mounting hardware for tightness and wear.
• Always ensure the gun or saw boot is properly seated and secured in the bracket before operating the vehicle.
• Pastikan tangan dan jari bebas daripada bahagian yang bergerak semasa pelarasan.
• This product is intended for off-road use. Adhere to all local laws and regulations regarding transport of firearms or tools.

5. Persediaan dan Pemasangan

Follow these steps for proper installation of your Kolpin Universal Gun/Saw Boot Bracket.

5.1 Alat Diperlukan

• Wrench set (appropriate sizes for bolts)
• Measuring tape (optional, for optimal placement)

5.2 Pemilihan Lokasi Pemasangan

Choose a mounting location on your ATV or UTV that provides secure attachment and does not obstruct vehicle operation or visibility. The bracket is designed to fit tubular steel racks or UTV frames up to 2 inches in diameter, including square tubing.

5.3 Attaching the Bracket Base

Position the bracket base on your chosen rack or frame. Use the provided U-bolts or other suitable hardware to secure the base firmly. Ensure the base is level and stable before tightening all nuts.

Imej: Terperinci view of the Kolpin Universal Gun/Saw Boot Bracket, showing its various components and the rubber-coated ring.

5.4 Assembling the Adjustable Arm

Attach the adjustable arm to the bracket base using the pivot bolt and nut. Do not fully tighten at this stage, as you will need to adjust the angle.

5.5 Melaraskan Sudut

Place your Kolpin Gun Boot or Saw Boot (sold separately) into the rubber-coated ring of the bracket. Adjust the angle of the arm to achieve the desired position, typically between 0° and 45° relative to the vehicle's rack. Ensure the boot is clear of wheels, suspension, and other vehicle components.

Image: A person adjusting the angle of a Kolpin Gun Boot mounted on an ATV using the universal bracket, demonstrating the flexibility of the bracket's positioning.

Image: A Kolpin Gun Boot securely mounted on the rear rack of an ATV, showcasing the bracket's stable attachment and the boot's position.

5.6 Final Tightening

Once the desired angle is set, securely tighten all bolts and nuts on the bracket base and the adjustable arm. Double-check all connections to ensure they are firm and stable.

Imej: Sisi view of a Kolpin Gun Boot mounted on an ATV, illustrating the bracket's low profile and how the boot extends along the vehicle's side.

6. Operasi

To use the Kolpin Universal Gun/Saw Boot Bracket:

1. Ensure the bracket is securely installed and all fasteners are tight.
2. Open your Kolpin Gun Boot or Saw Boot (sold separately).
3. Carefully insert your firearm or saw into the boot.
4. Close and secure the boot according to its own instructions.
5. Place the secured boot into the rubber-coated ring of the bracket. The rubber coating provides a snug fit and prevents scratching.
6. Verify that the boot is firmly seated in the bracket before operating your vehicle.

7. Penyelenggaraan

Regular maintenance will ensure the longevity and reliable performance of your bracket.

• Pemeriksaan: Periodically inspect the bracket and all mounting hardware for signs of wear, corrosion, or damage. Check for loose bolts or nuts.
• Pembersihan: Clean the bracket with mild soap and water. Avoid harsh chemicals that may damage the finish or rubber coating.
• Pelinciran: If the adjustable pivot point becomes stiff, apply a small amount of silicone-based lubricant.
• Storan: If removing the bracket for extended periods, store it in a dry place away from direct sunlight and extreme temperatures.

8. Penyelesaian masalah

If you encounter issues with your Kolpin Universal Gun/Saw Boot Bracket, refer to the following common problems and solutions:

9. Spesifikasi

10. Waranti dan Sokongan

Kolpin products are manufactured to high standards and are backed by a limited warranty. For specific warranty details, product registration, or technical support, please visit the official Kolpin webtapak atau hubungi bahagian perkhidmatan pelanggan mereka.

Webtapak: www.kolpin.com

Perkhidmatan Pelanggan: Refer to the Kolpin webtapak untuk maklumat hubungan.