Manual Pengguna Gelung Ekor Buaya One Control OC10 Boleh Diprogram

1. Pengenalan

The One Control OC10 Crocodile Tail Loop is a highly versatile programmable looper designed for guitar effects pedalboards. It allows musicians to create complex signal chains and recall them instantly, enhancing performance flexibility and sound management.

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your OC10 Crocodile Tail Loop.

2. Ciri-ciri Utama

10 Switchable Effects Loops: Provides extensive options for pedalboard configuration.
Series and Independent Loops: Loops 1-7 operate in series from a single main input, while loops 8, 9, and 10 feature independent external inputs for advanced routing.
Mod Langsung: Allows individual toggling of loops via dedicated footswitches.
Integrasi MIDI: Enables control and synchronization with MIDI-compatible devices.
Reka bentuk padat: Optimized for pedalboard space efficiency.

3. Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej:

One Control OC10 Crocodile Tail Loop Unit
Power Adapter (if included in bundle)
4 x Patch Cables (as per bundle description)
Manual Pengguna (dokumen ini)

One Control OC10 Crocodile Tail Loop with included cables

Rajah 3.1: Depan view of the One Control OC10 Crocodile Tail Loop with included patch cables. The unit is black with silver footswitches and a central silver handle. Two short patch cables and two longer patch cables are visible above the unit.

4. Persediaan dan Sambungan

Proper connection of the OC10 is crucial for optimal performance. Follow these steps to integrate the looper into your setup.

4.1 Sambungan Kuasa

Connect the appropriate 9V DC power adapter (center negative) to the "9V IN" jack on the rear panel of the OC10. Ensure the power source meets the specified voltage dan keperluan semasa.

4.2 Sambungan Audio

The OC10 features multiple input and output jacks for flexible routing.

belakang view of One Control OC10 Crocodile Tail Loop showing all input and output jacks

Figure 4.1: Rear panel of the One Control OC10 Crocodile Tail Loop, displaying various input, output, send, and return jacks for effects loops, MIDI IN/OUT/THRU, and power input.

Input Utama: Connect your guitar or the output of your first pedal to the "IN" jack.
Keluaran Utama: Connect the "OUT-1" jack to your amplifier's input or the next device in your signal chain.
Effects Loops (1-7): For each loop, connect the "SEND" jack to the input of your effect pedal and the "RETURN" jack to the output of the same pedal. These loops are in series.
Independent Loops (8, 9, 10): These loops have dedicated "IN" and "OUT" jacks (e.g., IN8, OUT8). Use these for effects that require a separate input or for parallel routing.
Keluaran Tuner: Connect your tuner to the "TUNER" jack. This output is buffered.

4.3 Sambungan MIDI

The OC10 supports MIDI for advanced control and integration with other MIDI-enabled devices.

MIDI DALAM: Connect a MIDI controller or interface here to send program change (PC) or control change (CC) messages to the OC10.
MIDI OUT/THRU: Use "MIDI OUT" to send MIDI messages generated by the OC10. "MIDI THRU" passes incoming MIDI data directly to another device.

5. Arahan Operasi

The OC10 offers various modes of operation to suit different performance needs.

Atas view of One Control OC10 Crocodile Tail Loop showing footswitches and control buttons

Figure 5.1: Top panel of the One Control OC10 Crocodile Tail Loop, highlighting the footswitches for program selection and bank changes, along with the smaller control buttons for programming and MIDI settings.

5.1 Mod Program

In Program Mode, you can store and recall combinations of activated effects loops. Each program saves the on/off state of all 10 loops.

Memilih Program: Use the footswitches labeled PGM1/L1 through PGM7/L7 to select a stored program. The active program's LED will illuminate.
Changing Banks: Use the "BANK UP/L8" and "BANK DN/L9" footswitches to navigate through different banks of programs.
Storing Programs:
1. Activate or deactivate the desired loops using the small buttons above the footswitches (or in Direct Mode).
2. Press and hold the footswitch where you want to save the program until its LED flashes, indicating successful storage.

5.2 Direct Mode

Direct Mode allows you to individually toggle each of the 10 effects loops on or off in real-time, without recalling a stored program.

Activating Direct Mode: Press the "DIRECT" button (usually near the tuner output switch). The "DIRECT" LED will illuminate.
Toggling Loops: In Direct Mode, each footswitch (PGM1/L1 to PGM7/L7, BANK UP/L8, BANK DN/L9, TUNER/L10) directly controls its corresponding loop. Press the footswitch to toggle the loop on or off.

5.3 Operasi MIDI

The OC10 can send and receive MIDI Program Change (PC) and Control Change (CC) messages.

Receiving PC Messages: The OC10 can be configured to switch programs based on incoming MIDI PC messages. Refer to the detailed MIDI section in the full manual for mapping.
Sending PC/CC Messages: The OC10 can be programmed to send MIDI PC or CC messages when a program is recalled or a loop is toggled. This allows it to control other MIDI-compatible devices in your setup.

6. Penyelenggaraan

To ensure the longevity and optimal performance of your OC10 Crocodile Tail Loop, follow these maintenance guidelines:

Pembersihan: Gunakan kain lembut dan kering untuk mengelap unit. Elakkan pembersih atau pelarut yang kasar.
Storan: Simpan unit di tempat yang sejuk dan kering jauh dari cahaya matahari langsung dan suhu yang melampau.
Sambungan: Periodically check all cable connections for secure fit and signs of wear. Loose connections can cause signal loss or noise.
Bekalan Kuasa: Always use the specified power supply. Incorrect voltage or polarity can damage the unit.

7. Penyelesaian masalah

If you encounter issues with your OC10, refer to the following common problems and solutions:

Masalah	Kemungkinan Punca	Penyelesaian
Tiada kuasa/Unit tidak dihidupkan	Incorrect power supply; Loose power connection; Faulty outlet	Ensure correct 9V DC (center negative) power supply is used. Check power cable connection. Test outlet with another device.
No sound/Signal loss	Incorrect cable connections; Faulty cables; Loop not activated; Buffer issue	Verify all audio cables are correctly connected to IN/OUT/SEND/RETURN jacks. Test cables. Ensure the desired loop is active in Program or Direct Mode. Check buffer settings.
Hum atau bunyi bising	Ground loop; Faulty power supply; Interference from other devices	Use isolated power supply for pedals. Ensure proper grounding. Move unit away from power transformers or noisy electronics.
Programs not saving	Incorrect saving procedure	Ensure you press and hold the target footswitch until the LED flashes to confirm saving.

If the problem persists after trying these solutions, please contact One Control customer support.

8. Spesifikasi

Ciri	Perincian
Model	OC10 Crocodile Tail BUNDLE
Dimensi (L x W x H)	24 x 18 x 8 inci (anggaran, berdasarkan dimensi produk)
Berat badan	17.3 paun
Bekalan Kuasa	9V DC (Pusat Negatif)
Effects Loops	10 (7 series, 3 independent)
MIDI	MIDI IN, MIDI OUT/THRU
warna	Hitam
Antara Muka Perkakasan	Audio 1/4 inci
Format Isyarat	Analog

9. Waranti dan Sokongan

One Control products are designed for reliability and performance. For warranty information and technical support, please refer to the official One Control webtapak atau hubungi pengedar sah anda.

Sokongan Pelanggan: For assistance with product setup, operation, or troubleshooting, please visit the One Control Support Page atau hubungi perkhidmatan pelanggan mereka secara terus.

Pelan Perlindungan: Additional protection plans may be available for purchase. Please check with your retailer for details on extended warranty options.

	One Control Crocodile Tail Loop User Manual User guide for the One Control Crocodile Tail Loop, a flagship programmable pedal switcher with MIDI capabilities and a built-in BJF buffer.
	Manual Pengguna One Control Minimal Series MIDI Dual Stereo Gelung Manual pengguna terperinci untuk pedal One Control Minimal Series MIDI Dual Stereo Loop (MDSL). Ketahui tentang fungsi gelung MIDI, keupayaan stereo/mono, spesifikasi, arahan kawalan isyarat MIDI (PC dan CC) dan tetapan suis L1/L2 untuk mengurus penukaran isyarat mono-kepada-stereo. MDSL menawarkan reka bentuk padat dan fungsi canggih untuk pemain gitar dan pemuzik.
	One Control Chamaeleo Tail Loop MK2 User Manual User manual for the One Control Chamaeleo Tail Loop MK2, a programmable guitar effects loop switcher with 5 loops, buffer, and intuitive controls.
	Manual Pengguna Gelung Ekor Agamidae Manual pengguna untuk One Control Agamidae Tail Loop, yang memperincikan ciri-ciri, operasi dan spesifikasi teknikalnya untuk mengurus pedal kesan gitar.
	Gelung Hitam Siri Minimal Satu Kawalan dengan Penimbal BJF: Produk Berakhirview dan Spesifikasi Temui One Control Minimal Series Black Loop, penukar gelung serba boleh dengan penimbal BJF bersepadu, yang menawarkan operasi pintasan atau penimbal sebenar dan output DC berganda untuk persediaan kesan gitar. Ketahui tentang ciri, spesifikasi dan fungsi lanjutan Siri Minimal.
	Gebruikershandleiding Chamaeleo Tail Gelung MKIII - Satu Kawalan Mendapatkan gebruikerhandleiding daripada One Control Chamaeleo Tail Loop MKIII, dan padat 5-programmige loopswitcher bertemu 4 serieloops, 1 apartate loop, Redam/Tuner Out dalam BJF Buffer untuk memberi isyarat penghalaan.

One Control OC10 Crocodile Tail BUNDLE