Rabalux 5421 UFO Ceiling Light User Manual

pengenalan

This manual provides essential information for the safe installation, operation, and maintenance of your Rabalux 5421 UFO Ceiling Light. Please read these instructions carefully before installation and retain them for future reference. This product is designed for indoor use only.

Arahan Keselamatan

• Always disconnect the main power supply at the circuit breaker before attempting any installation, maintenance, or bulb replacement.
• Installation should be performed by a qualified electrician or a competent person if you are unsure about electrical wiring.
• Pastikan bahawa voltage supply (230V) matches the requirements of the fixture.
• Jangan melebihi wat maksimumtage daripada 60W per E27 bulb. Using higher wattage bulbs can cause overheating and damage to the fixture.
• The fixture has an IP20 protection rating, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. Do not install in bathrooms or other areas where it may be exposed to moisture.
• Pastikan pembumian yang betul mengikut kod elektrik tempatan.
• Jauhkan bahan pembungkus daripada kanak-kanak.

Kandungan Pakej

Sila pastikan semua komponen ada dan tidak rosak sebelum pemasangan:

• Rabalux 5421 Ceiling Light fixture (wooden frame, metal base, opal diffuser)
• Perkakasan pemasangan (skru, palam dinding)
• Manual Arahan

Note: Light bulbs (E27) are not included and must be purchased separately.

Persediaan dan Pemasangan

Alat yang Diperlukan: Screwdriver, drill, wire strippers, voltage tester, pencil, measuring tape.

1. Sediakan untuk Pemasangan:
   • Turn off the electricity at the main circuit breaker to prevent electric shock.
   • Carefully unpack the fixture and inspect it for any damage.
2. Memasang Lekapan:
   • Position the mounting bracket (usually attached to the fixture's base) against the ceiling at the desired location.
   • Mark the drilling points with a pencil.
   • Drill holes at the marked points and insert appropriate wall plugs (if required for your ceiling type).
   • Kencangkan pendakap pelekap ke siling menggunakan skru yang disediakan.
3. Sambungan Elektrik:
   • Connect the household electrical wires to the corresponding terminals on the fixture. Typically:
     • Brown or Red wire (Live) to the 'L' terminal.
     • Blue or Black wire (Neutral) to the 'N' terminal.
     • Green/Yellow wire (Earth) to the '⚡' (Earth) terminal.
   • Pastikan semua sambungan selamat dan terlindung dengan betul.
4. Attaching the Fixture Body:
   • Carefully attach the main body of the light fixture to the mounting bracket, securing it with the screws or fasteners provided.
5. Pemasangan Mentol:
   • Gently remove the opal diffuser by unscrewing the decorative nuts or clips.
   • Screw two E27 bulbs into the lamp holders. Ensure each bulb does not exceed 60W.
   • Carefully reattach the opal diffuser and secure it.
6. Langkah Akhir:
   • Restore power at the main circuit breaker and test the light fixture.

Rajah 1: The assembled Rabalux 5421 UFO Ceiling Light, featuring a circular wooden frame and a central opal glass diffuser. The light is designed for ceiling mounting.

Arahan Operasi

Once properly installed and powered, the Rabalux 5421 UFO Ceiling Light operates via a standard wall switch connected to your household electrical circuit.

• Menghidupkan/Mematikan: Gunakan suis dinding untuk menghidupkan atau mematikan lekapan lampu.
• Ciri Boleh Dimalapkan: This fixture is designed to be dimmable. To utilize this feature, you must use compatible dimmable E27 bulbs and connect the fixture to a suitable dimmer switch (both sold separately). Follow the instructions provided with your dimmer switch and dimmable bulbs for proper operation.

Penyelenggaraan

• Pembersihan: To clean the fixture, ensure the power is off. Wipe the wooden frame and metal parts with a soft, dry cloth. The opal diffuser can be gently wiped with a slightly damp cloth, then dried immediately. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
• Penggantian mentol:
  1. Matikan bekalan kuasa pada pemutus litar.
  2. Carefully remove the opal diffuser.
  3. Unscrew the old E27 bulb(s) counter-clockwise.
  4. Screw in new E27 bulb(s) clockwise, ensuring they do not exceed 60W each.
  5. Reattach the opal diffuser securely.
  6. Pulihkan kuasa dan uji cahaya.

Menyelesaikan masalah

If you encounter issues with your Rabalux 5421 UFO Ceiling Light, please refer to the following common problems and solutions:

• Lampu tidak menyala:
  • Periksa sama ada bekalan kuasa utama dihidupkan pada pemutus litar.
  • Pastikan suis dinding berada dalam kedudukan 'HIDUP'.
  • Verify that the bulbs are correctly screwed into their sockets and are not faulty. Try testing with a known working bulb.
  • Inspect electrical connections for any loose wires (ensure power is off before checking).
• Cahaya berkelip-kelip atau malap:
  • If using a dimmer, ensure that the bulbs are specifically rated as dimmable and are compatible with your dimmer switch.
  • Check that bulbs are screwed in tightly.
  • Pastikan jumlah wattage of the bulbs does not exceed the dimmer's capacity.
• Bunyi atau bau yang luar biasa:
  • Immediately turn off the power supply at the circuit breaker.
  • Do not attempt to operate the light. Contact a qualified electrician for inspection.

Jika langkah ini tidak menyelesaikan isu, sila hubungi sokongan pelanggan atau juruelektrik yang berkelayakan.

Spesifikasi

Waranti dan Sokongan

For detailed warranty information, please refer to the documentation provided at the time of purchase or contact your retailer directly. Warranty terms may vary by region and retailer.

For technical assistance or further inquiries, please contact the manufacturer, Rabalux, or your point of purchase. Ensure you have your model number (5421) and proof of purchase available when seeking support.