pengenalan
This manual provides instructions for the proper use and maintenance of your FETCO D037 1.9L Tall Stainless Steel Server. Designed to keep beverages hot for extended periods, this server features dual-layer vacuum insulation and a traditional pitcher shape for precise pouring. Constructed from brushed stainless steel and ABS plastic, it offers durability and ease of cleaning.
Arahan Keselamatan Penting
- Always handle with care when filled with hot liquids to prevent burns.
- Do not use in a microwave oven or on any direct heat source.
- Keep out of reach of children when containing hot beverages.
- Do not overfill the server; leave adequate space for the lid.
- Ensure the lid is securely fastened before pouring or transporting.
- Avoid dropping the server, as this may damage the vacuum insulation.
- Do not use abrasive cleaners or scrubbers that could scratch the stainless steel finish.
Pengenalan Bahagian
Image of the FETCO D037 1.9L Tall Stainless Steel Server, featuring a brushed stainless steel body, black handle, and black lid with a pouring spout.
- Server Body: Brushed stainless steel, dual-layer vacuum insulated.
- Tudung: Black ABS plastic, designed for secure fit and pouring.
- pemegang: Ergonomic black ABS plastic for comfortable grip and pouring.
- Muncung: Integrated into the lid for controlled pouring.
Persediaan
- Membongkar: Carefully remove the server from its packaging. Retain packaging for future storage or transport if needed.
- Pembersihan Awal: Before first use, wash the server body and lid thoroughly with warm, soapy water. Rinse completely and dry.
- Pre-heating/Pre-cooling (Optional): For optimal temperature retention, pre-heat the server with hot water or pre-cool with cold water for 5-10 minutes before filling with your desired beverage. Empty the pre-heating/pre-cooling water before adding your beverage.
Arahan Operasi
- Pengisian: Remove the lid. Pour your hot or cold beverage into the server. Do not fill past the bottom of the lid's threading to prevent overflow.
- Mengamankan Tudung: Place the lid back onto the server and twist clockwise until it is firmly sealed. Ensure the pouring spout is aligned as desired.
- Menuang: To pour, tilt the server and allow the beverage to flow from the spout. The ergonomic handle provides a secure grip for controlled pouring.
- Mengekalkan Suhu: For best results, keep the lid securely closed when not pouring. The dual-layer vacuum insulation will maintain the beverage's temperature for several hours.
Penyelenggaraan dan Pembersihan
- Pembersihan Harian: After each use, wash the server body and lid with warm, soapy water. Use a soft brush for the interior if necessary. Rinse thoroughly with clean water.
- Pengeringan: Allow all parts to air dry completely before reassembling or storing to prevent odors or mildew.
- Penghapusan Noda: For stubborn stains or odors, a mixture of baking soda and warm water can be used. Let it sit for a few hours, then rinse thoroughly.
- Jangan Basuh Pinggan: This server is not recommended for dishwasher use, as high temperatures and harsh detergents can damage the vacuum seal and exterior finish. Hand washing is advised.
- Storan: Store the server with the lid slightly ajar to allow air circulation and prevent odors.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Beverage not staying hot/cold | Lid not sealed properly; server not pre-heated/pre-cooled; damaged vacuum insulation. | Ensure lid is tightly closed. Pre-heat/pre-cool the server. If insulation is damaged, the server may need replacement. |
| Bocor dari penutup | Lid not secured; overfilled server; lid seal damaged. | Tighten lid. Do not overfill. Inspect lid seal for damage and replace if necessary. |
| Unpleasant odor inside server | Improper cleaning; server stored with lid tightly closed. | Clean thoroughly with baking soda and water. Store with lid slightly ajar. |
Spesifikasi
- Jenama: Fetco
- model: D037
- Bahan: Stainless Steel (body), ABS Plastic (lid, handle)
- kapasiti: 1.9 Liter
- Penebat: Dual-layer vacuum
- gaya: Traditional pitcher
- bentuk: Bulat
- Tudung: ya
Waranti dan Sokongan
For specific warranty information regarding your FETCO D037 server, please refer to the documentation provided at the time of purchase or contact your retailer. Warranty terms typically cover manufacturing defects.
For technical support, replacement parts, or further assistance, please contact Fetco customer service directly. Contact details can usually be found on the official Fetco webtapak atau melalui peruncit produk anda.
