Unitech MS840 Rugged Handheld Laser Scanner
Model: MS840-SUBBGC-SG
1. Pengenalan
The Unitech MS840 is a high-performance, rugged handheld laser scanner designed for demanding environments. It offers reliable and accurate barcode scanning capabilities, making it ideal for various applications including retail, logistics, and inventory management. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your MS840 scanner.
Image 1.1: The Unitech MS840 Rugged Handheld Laser Scanner. This image shows the dark blue and light blue scanner from a slight angle, highlighting its ergonomic design and the laser scanning window at the front.
2. Maklumat Keselamatan
Please read all safety instructions carefully before using the Unitech MS840 scanner to prevent injury or damage to the device.
- Keselamatan Laser: This device uses a Class 1 laser. Do not stare directly into the laser beam or point it at others.
- Keselamatan Elektrik: Use only the provided USB cable. Do not expose the device to water or extreme temperatures.
- Pengendalian: The MS840 is rugged, but avoid dropping it from excessive heights or subjecting it to severe impacts.
- Pelupusan: Lupuskan peranti dan komponennya mengikut peraturan alam sekitar tempatan.
3. Kandungan Pakej
Sahkan bahawa semua item terdapat dalam pakej anda:
- Unitech MS840 Handheld Laser Scanner
- Kabel Sambungan USB
- Panduan Mula Pantas (jika berkenaan)
4. Persediaan
Follow these steps to set up your Unitech MS840 scanner:
- Sambungkan Kabel USB:
Insert the smaller end of the USB cable into the port at the base of the MS840 scanner. Connect the larger end of the USB cable to an available USB port on your computer (Laptop or Desktop).
- Pemasangan Pemandu:
The MS840 is typically a plug-and-play device and should be recognized automatically by most operating systems. If prompted, allow your system to install the necessary drivers. No additional software installation is usually required for basic operation.
- Ujian Permulaan:
Open a text editor or a program where you can input text (e.g., Notepad, Word). Scan a known barcode. If the setup is successful, the barcode data should appear in the opened application.
5. Mengendalikan Pengimbas
The Unitech MS840 is designed for simple and efficient barcode scanning.
- Hidupkan kuasa: The scanner powers on automatically when connected to a powered USB port.
- Bertujuan: Hold the scanner with the scanning window facing the barcode. Press the trigger button located on the handle. A red laser line will project from the scanning window.
- Mengimbas: Position the laser line across the entire barcode. Ensure the barcode is flat and well-lit.
- Petunjuk Imbasan yang Berjaya: Upon a successful read, the scanner will typically emit an audible beep and/or an LED indicator will flash. The scanned data will be transmitted to your connected computer as if typed from a keyboard.
- Kod Bar yang Disokong: The MS840 is a laser scanner, primarily designed for 1D (linear) barcodes.
6. Penyelenggaraan
Proper maintenance ensures the longevity and optimal performance of your MS840 scanner.
- Membersihkan Tetingkap Pengimbasan:
Regularly clean the scanning window with a soft, lint-free cloth. For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaning solution. Do not use harsh chemicals or abrasive materials.
- Pembersihan Am:
Lap bahagian luar pengimbas dengan kain lembut,amp kain. Elakkan kelembapan daripada memasuki sebarang bukaan.
- Penjagaan Kabel:
Avoid bending or twisting the USB cable excessively. Store the cable neatly when not in use to prevent damage.
- Storan:
Simpan pengimbas di persekitaran yang bersih dan kering, jauh daripada cahaya matahari langsung dan suhu yang melampau apabila tidak digunakan.
7. Penyelesaian masalah
If you encounter issues with your MS840 scanner, refer to the following common problems and solutions:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Pengimbas tidak dapat dihidupkan. | Kabel USB tidak disambungkan dengan betul atau port USB rosak. | Ensure the USB cable is securely connected to both the scanner and the computer. Try a different USB port on your computer. |
| Pengimbas tidak membaca kod bar. | Barcode damaged, poor lighting, incorrect aiming, or unsupported barcode type. | Ensure the barcode is clear and undamaged. Provide adequate lighting. Aim the laser line directly across the barcode. Verify it's a 1D barcode. Clean the scanning window. |
| Scanned data not appearing on screen. | Application not in focus, incorrect keyboard layout, or driver issue. | Click into the text field of the application where you want the data to appear. Restart the application or computer. Check device manager for driver status. |
| Scanner beeps but no data. | Data transmission issue or application not ready. | Ensure the cursor is active in the target application. Try scanning into a simple text editor like Notepad to isolate the issue. |
If the problem persists after trying these solutions, please contact Unitech customer support.
8. Spesifikasi
Detailed technical specifications for the Unitech MS840 scanner:
| Ciri | Penerangan |
|---|---|
| Jenama | Unitech |
| Model | MS840-SUBBGC-SG |
| Jenis Pengimbas | Hand-held Laser Scanner |
| Jenis Elemen Imbasan | Laser |
| Scan Speed / Rate | 100 scans/second (100 fps) |
| Teknologi Ketersambungan | Cable (USB) |
| Jenis Antaramuka | USB |
| Peranti Serasi | Laptop, Desktop |
| Dimensi Produk (LxWxH) | 2.54 x 2.54 x 2.54 cm (25 x 25 x 25 Milimeter) |
| Berat Barang | 454 g (453.59 g) |
| Bateri Diperlukan | Tidak |
| ASIN | B00C4OGY2I |
| Nombor Pengenalan Perdagangan Global (GTIN) | 00132017875439 |
| Tarikh Tersedia Pertama | 30 April 2013 |
9. Waranti dan Sokongan
Unitech products are manufactured to high quality standards and come with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Unitech webtapak.
For technical support, service, or further inquiries, please contact Unitech customer service through their official channels. Have your model number (MS840-SUBBGC-SG) and ASIN (B00C4OGY2I) ready when contacting support.
Note: Contact information for Unitech can typically be found on their official webtapak atau dalam pembungkusan produk.
