1. Maklumat Keselamatan Penting
Please read all safety instructions carefully before attempting to install or service this heating element. Failure to follow these instructions may result in electric shock, fire, or personal injury.
- Putuskan Kuasa: Always ensure the oven's power supply is completely disconnected at the circuit breaker or fuse box before beginning any installation or maintenance.
- Pemasangan Profesional Disyorkan: Installation of this heating element should ideally be performed by a qualified technician.
- Bahaya Elektrik: Produk ini beroperasi dengan volum tinggitage. Do not touch electrical connections when power is supplied.
- Use Correct Part: Ensure this heating element is the correct replacement part for your specific Neff oven model (B1322 N0GB/01).
- Periksa Kerosakan: Before installation, visually inspect the new heating element for any signs of damage. Do not install if damaged.
2. Produk Lebihview
The Neff B1322 N0GB/01 2300W Oven Heating Element is a critical component responsible for generating heat within your oven. It is designed for specific Neff oven models to ensure optimal performance and compatibility.
This image displays the Neff B1322 N0GB/01 2300W oven heating element, featuring its circular coil design and two electrical terminals for connection.
3. Pemasangan (Persediaan)
Follow these steps carefully to replace your oven's heating element. Ensure all safety precautions are observed.
Alat yang Diperlukan:
- Screwdriver (Phillips or flathead, depending on oven model)
- Pliers (optional, for terminal removal)
- Sarung tangan kerja (disyorkan)
Prosedur:
- Putuskan Kuasa: Turn off the power to the oven at the main circuit breaker. Verify power is off using a voltage tester if available.
- Access Oven Interior: Open the oven door. Locate the heating element, typically at the rear of the oven cavity.
- Remove Mounting Screws: Unscrew the mounting screws that secure the heating element to the oven wall. These are usually located at the base of the element's terminals.
- Carefully Pull Element Forward: Gently pull the heating element forward a few inches. This will expose the electrical terminals at the back.
- Putuskan Sambungan Wayar: Note the position of each wire. Carefully disconnect the electrical wires from the terminals of the old heating element. It is advisable to take a photo before disconnecting.
- Buang Elemen Lama: Once wires are disconnected, fully remove the old heating element from the oven cavity.
- Pasang Elemen Baharu: Connect the electrical wires to the terminals of the new heating element, ensuring they are securely attached to their correct positions.
- Secure New Element: Push the new heating element back into place, aligning the mounting holes. Secure it with the screws removed earlier.
- Close Oven: Tutup pintu ketuhar.
- Pulihkan Kuasa: Hidupkan semula kuasa pada pemutus litar.
4. Initial Operation and Testing
After installation, perform a test to ensure the heating element is functioning correctly.
- Panaskan Ketuhar: Set the oven to a moderate temperature (e.g., 180°C / 350°F) and allow it to preheat.
- Observe Heating: After a few minutes, carefully observe if the element begins to glow red and if the oven cavity starts to heat up.
- Semak Bau: A slight burning smell may occur during the first use as manufacturing residues burn off. This is normal and should dissipate quickly. If strong smoke or unusual odors persist, immediately turn off the oven and disconnect power.
- Monitor Suhu: Use an oven thermometer to verify that the oven reaches and maintains the set temperature.
5. Penyelenggaraan
The heating element itself requires no specific maintenance beyond ensuring its secure connection. However, general oven maintenance contributes to its longevity.
- Pembersihan tetap: Keep the oven interior clean from food spills and grease buildup. Always ensure the oven is cool and power is disconnected before cleaning.
- Elakkan Kesan: Do not strike or place heavy objects directly on the heating element, as this can cause damage.
- Pemeriksaan Berkala: Periodically inspect the heating element for any visible signs of damage, such as cracks, bulges, or discoloration. If damage is observed, replace the element.
6. Penyelesaian masalah
If your oven is not heating correctly after replacing the element, consider the following common issues:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Oven not heating at all | No power to the oven; faulty wiring connection; element not fully seated. | Check circuit breaker; verify all wire connections are secure; ensure element is properly installed. |
| Oven heats unevenly | Element partially failed; thermostat issue (less likely if element was just replaced). | Inspect element for partial damage; consult a technician for thermostat check. |
| Element not glowing red | Faulty element (rare for new part); insufficient power; control board issue. | Ensure power is on; re-check connections; if problem persists, contact a qualified technician. |
If troubleshooting steps do not resolve the issue, it is recommended to contact a qualified appliance repair technician.
7. Spesifikasi
- Jenama: Neff (Compatible with spares4less replacement part)
- Nombor Model: B1322 N0GB/01
- Penarafan Kuasa: 2300 Watt
- Jenis Bahagian: Elemen Pemanas Ketuhar
- ASIN: B00BLIBB1W
- Voltage: Refer to your specific oven's rating plate (typically 230-240V AC)
8. Waranti dan Sokongan
Information regarding specific warranty terms for this replacement part may vary depending on the retailer or manufacturer. Please retain your proof of purchase.
- Tuntutan Waranti: For warranty-related inquiries, please contact the seller (KGA-SUPPLIES) or the manufacturer directly with your purchase details.
- Sokongan Teknikal: For technical assistance or professional installation, it is recommended to consult a certified appliance technician.
