Linear 212LS-C26DCR-RT

Manual Pengguna Set Kunci Silinder Kawalan Akses Elektronik Linear 212LS-C26DCR-RT

Model: 212LS-C26DCR-RT

1. Pengenalan

This manual provides instructions for the installation, operation, and maintenance of the Linear 212LS-C26DCR-RT Electronic Access Control Cylindrical Lockset. This lockset is designed for secure access control in both commercial and residential environments.

Ciri-ciri Utama:

  • Durable construction for extended lifespan.
  • Clutch lever design for enhanced security.
  • Long battery life (up to 15,000 keypad activations) with low-battery alert.
  • Password retention during battery removal.
  • Easy installation into standard cylindrical door preps (ANSI 151.8).
  • Master password control system for managing up to 120 user passwords.
  • Mechanical key override for emergency situations.

2. Maklumat Keselamatan

Please read all instructions carefully before installation and operation. Failure to follow these instructions may result in damage to the product, property, or personal injury.

  • Ensure proper battery polarity when installing batteries.
  • Do not expose the lockset to extreme temperatures or moisture beyond its intended operating conditions.
  • Keep mechanical keys in a secure location, separate from the lockset.
  • Do not attempt to disassemble or repair the lockset yourself. Refer to qualified personnel for service.

3. Kandungan Pakej

Sahkan bahawa semua item hadir sebelum memulakan pemasangan:

  • Linear 212LS-C26DCR-RT Electronic Access Control Cylindrical Lockset
  • Perkakasan pemasangan
  • 2 Mechanical keys
  • Manual Pengguna (dokumen ini)

Note: Four AA 1.5 volt batteries are required and are not included in the package.

4. Pemasangan

The lockset is designed for easy installation into a standard cylindrical door preparation (ANSI 151.8).

4.1. Sediakan Pintu

Ensure your door has a standard cylindrical door prep. If not, consult a professional for proper door preparation.

4.2. Install the Lockset

  1. Follow the detailed instructions provided with the mounting hardware to secure the lockset components to the door.
  2. Ensure all cables are properly connected and routed to avoid pinching.

4.3. Pasang Bateri

  1. Locate the battery compartment, typically on the interior side of the lockset.
  2. Insert four (4) AA 1.5 volt batteries, ensuring correct polarity.
  3. Tutup penutup petak bateri dengan selamat.

Linear 212LS-C26DCR-RT Electronic Access Control Cylindrical Lockset, Right Hand OpeningFigure 1: Linear 212LS-C26DCR-RT Lockset showing keypad and lever handle.

5. Operasi

The lockset operates using a keypad for electronic access or mechanical keys for override.

5.1. Initial Setup and Master Password

Upon initial power-up, you will need to set a master password. Refer to the specific programming instructions included with your lockset for this procedure. The master password allows for the management of up to 120 individual user passwords.

5.2. Adding User Passwords

Using the master password, you can add or delete up to 120 unique user passwords. Each user password grants access through the keypad.

5.3. Keypad Entry

  1. Enter a valid user password on the keypad.
  2. The lock will disengage, allowing the handle to operate.
  3. If an incorrect code is entered, the handle will not mechanically engage the cylinder, preventing unauthorized entry.

5.4. Penggantian Kunci Mekanikal

In emergency situations or if batteries are depleted, the provided mechanical keys can be used to unlock the door. Insert the key into the keyway and turn to unlock.

6. Penyelenggaraan

6.1. Penggantian Bateri

The lockset is designed for approximately 15,000 keypad activations, which translates to about 5 years of usage based on 10 activations per day. A low-battery alert will indicate when batteries need replacement. Replace all four AA batteries simultaneously with new, high-quality alkaline batteries.

6.2. Pembersihan

Clean the lockset exterior with a soft, damp cloth. Avoid abrasive cleaners or solvents that may damage the finish or electronic components.

7. Penyelesaian masalah

MasalahKemungkinan PuncaPenyelesaian
Handle does not engage after entering correct code.Low batteries or mechanical issue.Gantikan bateri. Jika masalah berterusan, gunakan kunci mekanikal dan hubungi sokongan.
Pad kekunci tidak bertindak balas.Dead batteries or internal electronic fault.Replace batteries. If still unresponsive, use mechanical key and contact support.
Cannot add or delete user passwords.Incorrect master password or programming error.Verify master password. Refer to programming instructions for correct procedure.

8. Spesifikasi

CiriPerincian
Nombor Model212LS-C26DCR-RT
Dimensi (L x W x H)10.1 x 8.5 x 7.4 inci
Berat badan5.5 paun
Sumber Kuasa4 bateri AA 1.5V (tidak termasuk)
Hayat BateriApprox. 15,000 activations
Jenis KunciPapan kekunci
Ciri Khaskalis air
bahanlogam

9. Waranti dan Sokongan

This product typically comes with a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Linear customer service. Contact information can usually be found on the manufacturer's webtapak atau pada pembungkusan produk.

Note: The warranty period for this product is generally 24 months, primarily for wholesale purchasers. Please confirm your specific warranty coverage.