FERM PRM1015 Precision Plunge Router User Manual

Produk Selesaiview

The FERM PRM1015 Precision Router is a powerful 1300W tool designed for precise routing tasks in various wood types. It features ergonomic soft-grip handles, a 0.1mm exact depth adjustment, variable speed control, and integrated LED lighting for optimal visibility. A dust extraction connection helps maintain a clean workspace.

Image: FERM PRM1015 Precision Router with ergonomic handles and transparent base.

Arahan Keselamatan

Always wear appropriate personal protective equipment (PPE) including safety glasses, hearing protection, and dust masks when operating the router. Ensure the workpiece is securely clamped. Disconnect the power supply before changing accessories or performing maintenance. Keep hands clear of the routing bit during operation.

Komponen Termasuk

• FERM PRM1015 Precision Router
• Panduan Selari
• Panduan Templat
• 6-piece Router Bit Set
• sepana
• Kunci Allen
• Manual Arahan

Image: The FERM PRM1015 router displayed with its complete set of accessories, including the parallel guide, template guide, router bits, and tools.

Image: A wooden box containing a 6-piece router bit set, showing various bit profiles for different routing applications.

Persediaan

Installing a Router Bit

1. Pastikan penghala dicabut daripada sumber kuasa.
2. Tekan dan tahan butang kunci gelendong.
3. Gunakan sepana yang disediakan untuk melonggarkan nat collet.
4. Insert the desired router bit into the collet, ensuring it is fully seated but not bottomed out.
5. Ketatkan nat collet dengan kuat menggunakan sepana sambil memegang kunci gelendong.

Melampirkan Panduan Selari

1. Slide the guide rods of the parallel guide into the designated holes on the router base.
2. Laraskan panduan kepada jarak yang dikehendaki dari bit penghala.
3. Secure the parallel guide by tightening the locking screws.

Menyambung Pengekstrakan Debu

Attach a suitable dust extraction hose to the dust port on the router base to minimize sawdust and maintain a clear view daripada bahan kerja.

Arahan Operasi

Melaraskan Kedalaman Pemotongan

1. Longgarkan kunci pelarasan kedalaman.
2. Turunkan penghala sehingga mata gerudi menyentuh benda kerja.
3. Set the depth stop to the desired cutting depth using the fine adjustment knob (0.1mm precision).
4. Lock the depth adjustment.

Kawalan Kelajuan Boleh Ubah

The router features variable speed control. Select the appropriate speed for the material being routed. Lower speeds are generally used for larger bits and harder materials, while higher speeds are suitable for smaller bits and softer materials.

Routing Techniques

• Always move the router against the direction of bit rotation to prevent kickback.
• For deep cuts, make several shallow passes rather than one deep pass to reduce strain on the tool and improve cut quality.
• Use the parallel guide for straight cuts along an edge.
• Use the template guide for routing along a specific pattern.

Penyelenggaraan

• Regularly clean the router, especially the collet and base, to remove sawdust and debris.
• Periksa kord kuasa untuk sebarang kerosakan sebelum setiap penggunaan.
• Check router bits for sharpness and damage; replace dull or damaged bits.
• Store the router in a dry, secure location away from moisture and extreme temperatures.

Menyelesaikan masalah

Router not starting

• Periksa sama ada kord kuasa dipasang dengan selamat ke soket yang berfungsi.
• Pastikan suis kuasa berada dalam kedudukan "ON".
• Sahkan bahawa pemutus litar tidak tersandung.

Kualiti potongan yang buruk atau getaran yang berlebihan

• Check if the router bit is securely tightened in the collet.
• Ensure the router bit is sharp and undamaged.
• Adjust the cutting speed according to the material.
• Make sure the workpiece is properly secured.

Spesifikasi

Waranti dan Sokongan

For warranty information and customer support, please refer to the official FERM webtapak atau hubungi pengedar tempatan anda. Simpan resit pembelian anda sebagai bukti pembelian.