Manual Arahan Suis Geganti Hidup/Mati JASCO GE Z-Wave (Model 45609 / ZW4001)

1. Pengenalan

This instruction manual provides comprehensive guidance for the installation, configuration, and operation of the JASCO GE Z-Wave On/Off Relay Switch, Model 45609 (ZW4001). This device is designed to integrate into your Z-Wave wireless lighting control system, enabling remote ON/OFF control of permanently installed lighting fixtures and ceiling fans.

The GE Z-Wave On/Off Relay Switch offers a convenient solution for smart home automation, compatible with various lighting types including CFL, LED, Xenon, Halogen, Fluorescent, and Incandescent. It supports both 2-way and 3-way wiring configurations when used with an auxiliary switch.

2. Maklumat Keselamatan Penting

AMARAN: RISIKO RENJAKAN ELEKTRIK. Installation involves high voltage wiring. Improper installation can result in serious injury or death. Always consult a qualified electrician if you are unsure about any part of the installation process.

• PUSAT KUASA: Before installation, turn OFF the power to the switch location at the circuit breaker or fuse box.
• WAYAR NEUTRAL DIPERLUKAN: This switch requires a neutral wire for operation. If your existing switch box does not have a neutral wire, consult a qualified electrician.
• KEGUNAAN DALAMAN SAHAJA: Peranti ini bertujuan untuk kegunaan dalaman di lokasi kering.
• LOAD COMPATIBILITY: Ensure the connected load does not exceed the switch's maximum rating.
• KAWALAN KIPAS: This switch provides ON/OFF control for ceiling fans; speed control is not supported.

3. Kandungan Pakej

• GE Z-Wave On/Off Relay Switch (Model 45609 / ZW4001)
• Wiring Nuts (typically included, but may vary)
• Manual Arahan (dokumen ini)

Nota: A wallplate is not included and must be purchased separately.

4. Persediaan dan Pemasangan

Follow these steps carefully to install your GE Z-Wave On/Off Relay Switch. If you are unfamiliar with electrical wiring, please consult a qualified electrician.

4.1 Wiring Diagram Overview

The switch requires Line (Hot), Load, Neutral, and Ground connections. For 3-way installations, an auxiliary switch (e.g., GE 45610) and a traveler wire are also required.

Rajah 1: Depan view of the GE Z-Wave On/Off Relay Switch (Model 45609) without a wallplate, showing the rocker switch and mounting bracket. The "TOP" indicator is visible at the top of the metal bracket. Electrical ratings (120VAC, 60Hz, 15A Resistive Load) are printed on the side.

4.2 Langkah Pemasangan

1. Matikan Kuasa: Locate the circuit breaker or fuse that supplies power to the switch box. Turn it OFF completely. Verify power is off using a voltage penguji.
2. Keluarkan Suis Sedia Ada: Carefully remove the wallplate and unscrew the existing switch from the wall box. Disconnect the wires from the old switch, noting which wire was connected to which terminal. It is recommended to label the wires (Line, Load, Neutral, Ground, Traveler if applicable).
3. Kenal pasti wayar:
   • Talian (Panas): Connects to the electrical panel, providing power.
   • Muatkan: Connects to the light fixture or fan.
   • neutral: Typically white, required for the switch to operate.
   • Tanah: Dawai kuprum atau dawai hijau yang terdedah.
   • Traveler (for 3-way): Connects to the auxiliary switch.
4. Wire the Z-Wave Switch: Connect the wires to the GE Z-Wave switch terminals as follows:
   • Wayar bawah tanah: Connect to the green GROUND terminal.
   • Kawat Neutral: Connect to the white NEUTRAL terminal.
   • Wayar Talian (Panas): Connect to the black LINE terminal.
   • Muatkan Wayar: Connect to the black LOAD terminal.
   • Traveler Wire (if 3-way): Connect to the red TRAVELER terminal. Cap off the traveler wire if not used.
5. Pasang Suis: Carefully fold the wires and push the switch into the wall box. Secure the switch with the provided screws.
6. Pasang Plat Dinding: Attach the new wallplate (not included) over the switch.
7. Pulihkan Kuasa: HIDUPKAN semula kuasa pada pemutus litar.
8. Kefungsian Ujian: Manually press the rocker switch to ensure the connected light or fan turns ON and OFF.

Rajah 2: Depan view of the GE Z-Wave On/Off Relay Switch (Model 45609) with a light almond wallplate installed. This illustrates the finished appearance of the switch in a standard electrical box.

5. Arahan Operasi

5.1 Kawalan Manual

The GE Z-Wave On/Off Relay Switch can be operated manually:

• Press the top of the rocker switch to turn the connected device ON.
• Press the bottom of the rocker switch to turn the connected device OFF.
• An LED indicator on the switch illuminates to show its location in a dark room.

5.2 Rangkuman Rangkaian Z-Wave (Pemasangan)

To add the switch to your Z-Wave network:

1. Place your Z-Wave controller into inclusion (pairing) mode. Refer to your controller's instruction manual for specific steps.
2. Once the controller is in inclusion mode, quickly tap the top or bottom of the rocker switch once. The LED indicator on the switch may flash to confirm inclusion.
3. The controller will confirm successful inclusion. You can now control the switch remotely through your Z-Wave network.

Nota: Pairing typically requires a light, quick tap, not a prolonged press.

5.3 Z-Wave Network Exclusion (Unpairing)

To remove the switch from your Z-Wave network:

1. Place your Z-Wave controller into exclusion (unpairing) mode. Refer to your controller's instruction manual for specific steps.
2. Once the controller is in exclusion mode, quickly tap the top or bottom of the rocker switch once. The LED indicator on the switch may flash to confirm exclusion.
3. The controller will confirm successful exclusion. The switch is now removed from your Z-Wave network.

6. Penyelenggaraan

• Pembersihan: Untuk membersihkan suis, lap dengan kain lembutamp kain. Jangan gunakan pembersih atau pelarut yang melelas.
• Tiada Bahagian Boleh Diservis Pengguna: Tiada bahagian yang boleh diservis pengguna di dalam suis. Jangan cuba membuka atau membaiki peranti ini.
• Kemas kini Firmware: Any firmware updates would be managed through your Z-Wave controller, if supported.

7. Penyelesaian masalah

8. Spesifikasi

9. Waranti dan Sokongan

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the JASCO Products webtapak. Simpan bukti pembelian anda untuk tuntutan waranti.

JASCO Products provides customer support for their Z-Wave devices. Contact information can typically be found on their official webtapak atau pada pembungkusan produk.