Manual Arahan Penyesuai Rangkaian Gigabit PCIe 1 Port StarTech.com ST1000SPEX2

pengenalan

This manual provides instructions for the installation, operation, and maintenance of the StarTech.com ST1000SPEX2 1 Port PCIe Gigabit Network Adapter. This adapter adds a 10/100/1000 Mbps compatible RJ45 Ethernet port to a PCI Express-enabled client, server, or workstation, offering a networking interface solution. It complies with IEEE 802.3/u/ab standards and supports features such as 9K Jumbo Frames, VLAN tagging, and Wake on LAN (WOL). The card includes both full-profile dan pro rendahfile installation brackets to accommodate various computer chassis form factors.

Maklumat Keselamatan

Patuhi langkah berjaga-jaga keselamatan berikut semasa pemasangan dan pengendalian:

• Elektrik Statik: Always discharge static electricity by using an anti-static wrist strap or grounding yourself before handling the component. Static discharge can damage devices and cause injury.
• Bucu tajam: Be cautious when handling the device, as some edges or components may be sharp. Exercise care to avoid cuts or abrasions.
• Matikan Sebelum Mengendalikan: Ensure the host device is powered off and unplugged before installing or removing the network adapter. Working with powered systems may lead to electric shocks or damage to components.

Image: Multi-language safety warnings, emphasizing precautions against static electricity and sharp edges.

Kandungan Pakej

Sahkan bahawa pakej anda mengandungi item berikut:

• 1 x 1 Port PCI Express PCIe Gigabit Network Server Adapter NIC Card
• 1 x Pro Rendahfile kurungan
• 1 x CD Pemacu
• 1 x Manual Arahan (dokumen ini)

Persediaan

Pemasangan Fizikal

Follow these steps to install the network adapter into your computer:

1. Power off your computer and disconnect the power cable from the power supply.
2. Buka bekas komputer.
3. Locate an available PCI Express (PCIe) slot on your motherboard. The ST1000SPEX2 uses a PCIe x1 interface, compatible with x1, x4, x8, or x16 slots.
4. Remove the metal bracket cover from the chosen PCIe slot on the computer case.
5. If your computer case requires a low-profile bracket, remove the full-profile bracket from the network adapter and attach the included low-profile kurungan.
6. Carefully insert the network adapter into the PCIe slot, ensuring it is fully seated. Secure the adapter with a screw or retention clip, depending on your case design.
7. Tutup bekas komputer dan sambungkan semula kabel kuasa.
8. Hidupkan komputer anda.

Image: The ST1000SPEX2 network adapter, showing the PCIe connector and RJ45 port with a full-height bracket.

Image: The ST1000SPEX2 network adapter configured with a low-profile bracket, suitable for smaller form factor cases.

Pemasangan Pemandu

Most modern operating systems, such as Windows 10 and Windows 11, will automatically detect and install the necessary drivers for the ST1000SPEX2 network adapter upon startup. If drivers are not automatically installed, or if you are using an older operating system (e.g., Windows 7, Windows Server 2012/2016/2019, Linux, Mac OS X Mavericks 10.9), you can install them from the included driver CD or download the latest drivers from the StarTech.com webtapak.

Beroperasi

Menyambung ke Rangkaian

Once the network adapter is physically installed and drivers are loaded, connect a standard RJ45 Ethernet cable from your network router, switch, or modem to the RJ45 port on the ST1000SPEX2 adapter. The adapter supports 10/100/1000 Mbps connections and will automatically negotiate the highest possible speed with your network device.

Imej: Jarak dekat view of the RJ45 Ethernet port and the two LED indicators (1000M and LINK/ACT) on the network adapter.

Penunjuk LED

The ST1000SPEX2 features two LED indicators on the bracket:

• 1000M (Gigabit Link/Activity): This LED indicates a Gigabit (1000 Mbps) connection. It will be lit when a Gigabit link is established and may flash to indicate network activity.
• LINK/ACT (Link/Activity): This LED indicates a network link (10/100 Mbps or 1000 Mbps). It will be lit when a network link is established and will flash to indicate network activity.

Ciri Lanjutan

The network adapter supports several advanced features:

• Sokongan Bingkai Jumbo: Supports 9K Jumbo Frames, which can improve network efficiency for large data transfers.
• VLAN Tagging (IEEE 802.1Q): Allows for network segmentation and traffic management.
• Bangun di LAN (WOL): Enables the computer to be remotely woken up from a low-power state.
• IEEE 802.1P Layer 2 Priority Encoding: Provides Quality of Service (QoS) for network traffic.
• IEEE 802.3x Full Duplex Flow Control: Manages data flow to prevent packet loss in full-duplex mode.

Penyelenggaraan

The StarTech.com ST1000SPEX2 network adapter requires minimal maintenance. Ensure the computer's internal environment is clean and free of dust to prevent overheating and maintain optimal performance. Periodically check for updated drivers on the StarTech.com website to ensure compatibility and access to the latest features or bug fixes.

Menyelesaikan masalah

• Tiada Lampu Pautan: Ensure the Ethernet cable is securely connected to both the adapter and the network device. Verify that the network device (router/switch) is powered on and functioning correctly. Check the computer's Device Manager to confirm the adapter is recognized and drivers are installed.
• Kelajuan Rangkaian Perlahan: Confirm that your network infrastructure (cables, router/switch) supports Gigabit Ethernet. Check the adapter's driver version and update if necessary. Ensure no other network devices are causing congestion.
• Penyesuai Tidak Dikesan: Ensure the adapter is fully seated in the PCIe slot. Try a different PCIe slot if available. Verify that the computer's BIOS/UEFI settings allow for PCIe device detection. Reinstall drivers if necessary.
• Isu Pemasangan Pemacu: If automatic driver installation fails, use the provided driver CD or download the latest drivers directly from the StarTech.com support weblaman web untuk sistem pengendalian khusus anda.

Spesifikasi

Waranti dan Sokongan

The StarTech.com ST1000SPEX2 network adapter is backed by a 2-year StarTech.com warranty. For technical support, please visit the official StarTech.com website or contact their customer service department. Free lifetime technical support is available for this product.