AMS F5266/18

AMS F5266/18 Modern Radio Pendulum Wall Clock User Manual

Model: F5266/18 | Brand: AMS

pengenalan

This manual provides detailed instructions for the setup, operation, and maintenance of your AMS F5266/18 Modern Radio Pendulum Wall Clock. Please read this guide thoroughly to ensure proper use and longevity of your clock.

Produk Selesaiview

The AMS F5266/18 is a radio-controlled pendulum wall clock featuring a modern design with a beech wood back panel and a golden metallic face. Its radio function ensures accurate timekeeping by automatically synchronizing with a time signal.

AMS F5266/18 Modern Radio Pendulum Wall Clock

Figure 1: AMS F5266/18 Modern Radio Pendulum Wall Clock. This image displays the clock's design, including its light beech wood back panel, golden metallic face with black Arabic numerals, and a matching golden pendulum.

Ciri-ciri Utama:

Arahan Persediaan

  1. Membongkar: Carefully remove the clock from its packaging. Inspect for any damage.
  2. Pemasangan Bateri: Locate the battery compartment on the back of the clock. Insert one (1) AA battery, ensuring correct polarity (+/-).
  3. Pendulum Installation: Gently attach the pendulum to its designated hook or slot, typically located below the clock mechanism. Ensure it hangs freely.
  4. Pemasangan: Choose a suitable wall location. The clock should be hung securely using appropriate wall anchors and screws (not included). Ensure the clock is level for optimal pendulum operation.
  5. Initial Time Synchronization: After battery installation, the clock will automatically search for the radio time signal. This process may take several minutes. Place the clock near a window or in an area with good signal reception for faster synchronization. The hands will move to 12:00 and then adjust to the correct time once the signal is received.

Arahan Operasi

Your AMS F5266/18 clock is designed for automatic operation once set up correctly.

Penyelenggaraan

Menyelesaikan masalah

MasalahKemungkinan PuncaPenyelesaian
Clock does not start or stops.Bateri mati atau tidak dipasang dengan betul.Check battery polarity. Replace with a fresh AA battery.
Clock does not set correct time.Poor radio signal reception.Move the clock to a location with better signal reception, ideally near a window. Allow several minutes for synchronization.
Bandul tidak berayun.Pendulum not properly installed or obstructed.Ensure the pendulum is correctly hooked and swings freely without touching the clock casing. Gently initiate the swing.
Clock makes a subtle ticking sound.Normal mechanical operation.This is a characteristic of the clock's movement and is not a defect.

Spesifikasi

Waranti dan Sokongan

For warranty information or technical support, please refer to the documentation provided at the point of purchase or contact your retailer. You may also visit the official AMS webtapak untuk bantuan lanjut.

Dokumen Berkaitan - F5266/18

Praview AMS 5898 / 5893 Radio-Controlled Clock User Manual
Detailed instructions for setting up and operating the AMS 5898 and AMS 5893 radio-controlled clocks, including time setting, alarm functions, temperature display, and maintenance.
Praview Arahan Pengendalian Jam Dinding AMS
Arahan pengendalian untuk jam dinding AMS, meliputi pemasangan, penggantian dan penggunaan umum bateri dalam pelbagai bahasa.
Praview Manual Kit Penilaian Papan Penyesuai ams AS5600L
Manual ini menyediakan maklumat komprehensif untuk papan penyesuai ams AS5600L-WL_EK_AB, termasuk kandungan kit, penerangan papan, arahan pemasangan, butiran pinout, operasi mod I2C, skema perkakasan, susun atur PCB dan maklumat pesanan.
Praview ams AS5048 Manual Pengguna Penderia Kedudukan Putar 14-bit
Manual pengguna ini menyediakan maklumat terperinci tentang ams AS5048, penderia kedudukan berputar 14-bit dengan sudut digital dan output PWM. Ia meliputi papan penyesuai AS5048, pemasangan, pinout, kes operasi (SPI, Daisy Chain), pengekodan perisian tegar bekasamples, dan skema perkakasan. Penting untuk jurutera yang mengintegrasikan sensor ini ke dalam sistem mereka.
Praview Manual Kit Penilaian Papan Penyesuai ams AS5048
Manual ini memperincikan Papan Penyesuai ams AS5048 (AS5048-EK-AB), kit penilaian untuk sensor kedudukan magnet AS5048. Ia merangkumi perkakasan, mod operasi (SPI, I2C), perisianamples, dan maklumat hubungan untuk ams AG.
Praview AMS Clock Operating Instructions and Battery Replacement Guide
Instructions for operating and replacing the battery in AMS clocks, with multilingual guidance.