Coaster Fine Furniture Louis Philippe Full Size Sleigh Bed Frame (Model 202411F) Instruction Manual

pengenalan

This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your Coaster Fine Furniture Louis Philippe Full Size Sleigh Bed Frame, Model 202411F. Please read these instructions carefully before beginning assembly and retain this manual for future reference.

Maklumat Keselamatan

• Always assemble the bed frame on a soft, clean surface to prevent damage to the product or your flooring.
• Pastikan semua bahagian ada dan tidak rosak sebelum dipasang. Jangan teruskan pemasangan jika ada bahagian yang hilang atau rosak.
• Tighten all fasteners securely, but do not overtighten, as this may strip threads or crack wood.
• Periksa semua sambungan secara berkala untuk memastikan ia kekal ketat.
• Jauhkan bahagian kecil daripada kanak-kanak semasa pemasangan.
• Jangan berdiri atau melompat di atas rangka katil.
• Gunakan rangka katil hanya untuk tujuan yang dimaksudkan.

Kandungan Pakej

Sahkan bahawa semua komponen berikut disertakan dalam pakej anda:

• One (1) Headboard
• One (1) Footboard
• Two (2) Side Rails
• Set of Slats with support legs
• Pek Perkakasan (bolt, pencuci, nat, sepana Allen)

Arahan Perhimpunan

Follow these steps to assemble your bed frame. It is recommended to have two people for assembly.

1. Buka bungkus dan Kenalpasti Bahagian: Carefully remove all components from the packaging. Lay them out on a clean, soft surface. Refer to the parts list to ensure all pieces are present.
2. Pasang Rel Sisi pada Kepala katil: Align the pre-drilled holes on one end of a side rail with the corresponding holes on the headboard. Insert the appropriate bolts and washers, then secure with nuts. Do not fully tighten yet. Repeat for the other side rail.
3. Pasang Rel Sisi pada Papan Kaki: With the side rails attached to the headboard, align the free ends of the side rails with the footboard. Insert bolts and washers, then secure with nuts. Once all four connections are made, gently tighten all bolts using the provided Allen wrench.
4. Pasang Bilah: Place the wooden slats across the width of the bed frame, resting them on the support ledges of the side rails. Ensure the support legs attached to the slats are positioned centrally and are touching the floor. Some slats may require screwing into the side rails for added stability; use the provided screws if applicable.
5. Semakan Akhir: Ensure all bolts are securely tightened and the bed frame is stable.

Arahan Operasi

Once assembled, your Coaster Fine Furniture Louis Philippe Full Size Sleigh Bed Frame is ready for use.

• Place your full-size mattress directly onto the installed slats.
• Pastikan tilam berada di tengah dan disokong sepenuhnya oleh bilah.
• Regularly check the stability of the bed frame and tighten any loose connections as needed.

Penyelenggaraan dan Penjagaan

To ensure the longevity and appearance of your bed frame, follow these care instructions:

• Pembersihan: Clean the bed frame using a damp cloth. Avoid using strong chemicals, abrasive cleaners, or polishes that may damage the finish.
• Berhabuk: Lap secara kerap dengan kain lembut dan kering.
• Perlindungan: Avoid direct sunlight and extreme temperature changes, which can cause wood to fade or crack.
• Semakan Kestabilan: Periodically inspect all bolts and connections to ensure they are tight. Retighten as necessary.

Menyelesaikan masalah

Jika anda menghadapi masalah dengan rangka katil anda, rujuk masalah dan penyelesaian biasa berikut:

• Bunyi Berdecit:
  • Ensure all bolts connecting the headboard, footboard, and side rails are securely tightened.
  • Check that the slats are properly seated and not rubbing against the side rails.
  • Verify that the center support legs for the slats are firmly on the floor and evenly distributed.
• Kerangka Katil Terasa Tidak Stabil:
  • Re-check all assembly connections. Loose bolts are a common cause of instability.
  • Pastikan rangka katil berada di atas permukaan yang rata.
• Slats Popping Out or Breaking:
  • Ensure the slats are correctly positioned within the side rail ledges.
  • Verify that the slat support legs are intact and providing adequate central support. If legs are broken, contact customer support for replacement parts.
  • Avoid excessive weight or impact on the bed, which can damage slats.
• Bahagian yang hilang:
  • If parts were missing upon initial unboxing, contact Coaster Fine Furniture customer support immediately with your model number and purchase details.

Spesifikasi

Waranti dan Sokongan

For warranty information or technical support regarding your Coaster Fine Furniture Louis Philippe Full Size Sleigh Bed Frame, please contact Coaster Fine Furniture customer service directly. Keep your purchase receipt and model number (202411F) readily available when contacting support.

Anda biasanya boleh mencari maklumat hubungan pada pengilang webtapak atau melalui peruncit anda.