Intermatic B00AAIM0D2

Intermatic Mechanical Timer User Manual

Model: B00AAIM0D2

pengenalan

This manual provides detailed instructions for the safe and efficient operation of your Intermatic Mechanical Timer, Model B00AAIM0D2. This heavy-duty, 20-amp, 240-volt timer is designed for general purpose applications, including lighting systems. Please read this manual thoroughly before installation and use to ensure proper function and to prevent damage or injury.

Arahan Keselamatan

Sentiasa patuhi langkah keselamatan berikut untuk mengurangkan risiko kebakaran, kejutan elektrik atau kecederaan:

Kandungan Pakej

Sahkan bahawa semua komponen terdapat dalam pakej:

Intermatic Mechanical Timer front view

Rajah 1: Depan view of the Intermatic Mechanical Timer, showing the dial and trippers.

Persediaan dan Pemasangan

  1. Pilih Lokasi: Select a dry, protected location near a 240V grounded outlet. Ensure the location is free from excessive heat, cold, or moisture.
  2. Pemasangan (Pilihan): If permanent mounting is desired, use appropriate screws and anchors (not included) to secure the timer to a wall or surface. Ensure it is mounted securely to prevent accidental dislodgement.
  3. Sambungkan Kuasa: Plug the timer's grounded 240V plug into a compatible 240V grounded receptacle.
  4. Sambung Perkakas: Plug the appliance or device you wish to control into the timer's 240V receptacle. Ensure the appliance's power requirements do not exceed the timer's 5000-watt maximum capacity.

Arahan Operasi

Menetapkan Masa Semasa

  1. Rotate the timer dial clockwise until the current time aligns with the arrow indicator on the timer's face. The dial is marked with 24 hours (1-24) and AM/PM indicators.

Menetapkan Masa HIDUP/MATI

The timer comes with four trippers: two "ON" (red) and two "OFF" (black). These trippers are inserted into the slots around the dial to set the desired operating schedule.

  1. Insert "ON" Tripper: Locate the time on the dial when you want the connected appliance to turn ON. Insert an "ON" (red) tripper into the corresponding slot on the outer edge of the dial.
  2. Insert "OFF" Tripper: Locate the time on the dial when you want the connected appliance to turn OFF. Insert an "OFF" (black) tripper into the corresponding slot on the outer edge of the dial.
  3. Repeat for additional ON/OFF cycles as needed. The timer supports multiple cycles within a 24-hour period.

Suis Override Manual

The timer features a manual override ON/OFF switch, typically located on the side or front of the unit. This switch allows you to manually turn the connected appliance ON or OFF, overriding the set program without disturbing the timer's settings. The timer will resume its programmed schedule at the next scheduled ON or OFF event.

Penyelenggaraan

The Intermatic Mechanical Timer requires minimal maintenance. Follow these guidelines to ensure longevity:

Menyelesaikan masalah

MasalahKemungkinan PuncaPenyelesaian
Appliance does not turn ON/OFF at programmed times.
  • Penetapan masa yang salah.
  • Trippers not correctly placed.
  • Manual override switch engaged.
  • No power to the timer.
  • Verify the current time is set accurately.
  • Ensure "ON" and "OFF" trippers are firmly inserted at the desired times.
  • Check the manual override switch position.
  • Verify the timer is plugged into a live 240V outlet and the circuit breaker is ON.
Timer dial is not rotating.
  • No power to the timer.
  • Kerosakan dalaman.
  • Periksa sambungan kuasa dan pemutus litar.
  • If power is present and the dial still doesn't rotate, the unit may require service.
Appliance remains ON or OFF constantly.
  • Missing "ON" or "OFF" tripper.
  • Manual override switch engaged.
  • Ensure both "ON" and "OFF" trippers are installed for each desired cycle.
  • Check the manual override switch position.

Spesifikasi

Waranti dan Sokongan

For warranty information or technical support, please contact Intermatic directly. Refer to the official Intermatic webtapak atau pembungkusan produk untuk butiran hubungan dan terma jaminan terkini.

Pengeluar: Intermatik

Untuk bantuan lanjut, anda juga boleh melawati Kedai Intermatic di Amazon.

Dokumen Berkaitan - B00AAIM0D2

Praview Panduan Pemasangan dan Pengaturcaraan Suis Pemasa Pencahayaan Intermatic EJ341C/EJ343C
Arahan terperinci untuk memasang dan memprogram suis pemasa pencahayaan Intermatic EJ341C (Kutub Tunggal) dan EJ343C (Tiga Hala). Meliputi persediaan, kawalan, kaedah pengaturcaraan, penyelesaian masalah dan spesifikasi.
Praview Panduan Pemasangan dan Pengendalian Pemasa Undur Dalam Dinding Elektronik Intermatic EI200
Panduan terperinci untuk memasang dan mengendalikan pemasa undur elektronik dalam dinding Intermatic EI200. Ciri-cirinya termasuk julat masa 5-30 minit, mod HOLD berterusan dan penarafan untuk motor tujuan umum 15A, tungsten 1000W dan 1/4 HP. Termasuk maklumat waranti.
Praview Pemasa Undur Dalam Dinding Elektronik Intermatic EI210 - Panduan Pemasangan & Operasi
Panduan komprehensif untuk pemasa undur elektronik dalam dinding Intermatic EI210, ciri-ciri terperinci, langkah pemasangan, mod operasi (Pemasa dan Tahan), dan maklumat jaminan. Termasuk spesifikasi teknikal dan butiran perhubungan untuk Intermatic Incorporated.
Praview Cara Memasang dan Mengendalikan Pemasa Dalam Dinding 24 Jam Intermatic E-1020
Panduan komprehensif untuk memasang dan mengendalikan pemasa mekanikal dalam dinding berbilang program 24 jam Intermatic E-1020. Termasuk arahan pendawaian, langkah pengaturcaraan dan maklumat jaminan.
Praview Suis Pemasa Mekanikal T173 T170 Intermatik - 24 Jam, 125V, 5HP
Spesifikasi terperinci untuk Suis Pemasa Mekanikal T173 T170 Intermatik. Mempunyai tetapan 24 jam, 125 VAC, rating motor 5 HP, 2NO DPST kenalan dan penutup NEMA 1. Sesuai untuk aplikasi komersil, perindustrian, kediaman, luaran dan HVACR.
Praview Manual Pengguna dan Waranti Pemasa Intermatic TN311
Panduan pengguna dan maklumat waranti terhad satu tahun untuk pemasa soket pembumian tugas berat Intermatic TN311. Ketahui cara menetapkan program, waktu dalam sehari dan penggantian automatik.