Mount-It! MI-303L Heavy-Duty Tilting TV Wall Mount Instruction Manual

1. Pengenalan

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your Mount-It! MI-303L Heavy-Duty Tilting TV Wall Mount. Please read this manual thoroughly before installation and retain it for future reference.

The Mount-It! MI-303L is designed to securely hold large televisions ranging from 43 to 90 inches, with a maximum weight capacity of 220 lbs. Its low-profile design positions your TV just 2.45 inches from the wall, offering a sleek, modern appearance. The adjustable tilt feature allows for a +10° upward and -12° downward tilt, helping to reduce glare and optimize your viewing angle. This mount features a single-piece wall plate for enhanced stability and ease of installation, compatible with VESA patterns up to 800x600 mm.

2. Maklumat Keselamatan

WARNING: Improper installation may result in serious personal injury and property damage. Read all instructions carefully before beginning installation.

• Pastikan permukaan pelekap dapat menyokong berat gabungan pelekap dan televisyen dengan selamat.
• Always use a stud finder to locate wall studs accurately. Do not install into drywall alone.
• Gunakan peralatan keselamatan yang sesuai, termasuk perlindungan mata, semasa pemasangan.
• Jangan melebihi kapasiti berat maksimum 220 lbs (100 kg).
• Do not exceed the maximum VESA compatibility of 800x600 mm.
• Always have at least two people for lifting and mounting the television.

3. Kandungan Pakej

Verify that all components are present and undamaged before installation. If any parts are missing or defective, contact Mount-It! customer support.

• Wall Mount Plate (1)
• Pendakap TV (2)
• Bubble Leveler (1)
• Assorted Hardware (screws, washers, spacers, anchors)

4. Alatan Diperlukan

Alat berikut disyorkan untuk pemasangan:

• Pencari Belajar
• Pensel
• Pita Pengukur
• Bor Power
• 3/16" (4.5mm) Drill Bit (for pilot holes)
• Sepana Soket atau Sepana Boleh Laras
• Pemutar Skru Kepala Phillips

5. Persediaan dan Pemasangan

5.1. Locate Wall Studs

Use a stud finder to locate the edges and center of at least two adjacent wood studs in your desired mounting location. Mark the center of the studs with a pencil. The wall plate is designed to fit 16-inch and 24-inch stud spacing.

Penerangan Imej: A black wall plate for the TV mount is shown against a white wall, with dashed lines indicating 16-inch and 24-inch spacing, highlighting its compatibility with standard wood studs. A small bubble level is integrated into the top center of the plate.

5.2. Determine TV VESA Pattern

The VESA (Video Electronics Standards Association) pattern refers to the distance between the four mounting holes on the back of your TV. Measure the horizontal and vertical distances between these holes in millimeters. This mount supports VESA patterns from 100x100 mm up to 800x600 mm.

Penerangan Imej: A diagram illustrating the VESA mounting pattern on the back of a television. It shows horizontal and vertical measurements for the mounting holes, with a maximum VESA of 800mm horizontally and 600mm vertically. A list of compatible VESA sizes is also provided.

5.3. Mount Wall Plate

1. Hold the wall plate against the wall, aligning the center holes with your marked stud centers. Use the integrated bubble level to ensure it is perfectly horizontal.
2. Mark the four drilling locations through the wall plate holes onto the wall.
3. Drill pilot holes into the marked locations using a 3/16" (4.5mm) drill bit. Ensure the drill bit penetrates the center of the wood studs.
4. Align the wall plate with the pilot holes and secure it to the wall using the provided lag bolts and washers. Tighten them firmly with a socket wrench until the wall plate is securely fastened.

5.4. Pasang Kurungan pada TV

1. Letakkan TV anda menghadap ke bawah di atas permukaan yang lembut dan bersih untuk mengelakkan calar.
2. Align the two TV brackets with the VESA mounting holes on the back of your TV. Ensure the hooks on the brackets are facing upwards.
3. Use the appropriate screws, washers, and spacers from the assorted hardware to secure the brackets to the TV. Hand-tighten initially, then use a Phillips head screwdriver to fully secure them. Do not overtighten.
4. Install the tilt knobs into the designated slots on the TV brackets. Twist them into place and tighten to lock the initial tilt position.

5.5. Gantungkan TV pada Plat Dinding

1. With the help of another person, carefully lift the TV and hook the attached TV brackets onto the top edge of the wall plate.
2. Gently lower the TV until the brackets are fully seated on the wall plate.
3. Locate the safety screws at the bottom of the TV brackets. Tighten these screws to secure the TV to the wall plate, preventing accidental dislodgement.

6. Arahan Operasi

6.1. Adjusting TV Tilt

The Mount-It! MI-303L allows for easy tilt adjustment to achieve your optimal viewsudut dan mengurangkan silau.

1. To adjust the tilt, loosen the tilt knobs located on the sides of the TV brackets by turning them counter-clockwise.
2. Carefully tilt the TV to your desired angle (up to +10° upward or -12° downward).
3. Once the desired angle is achieved, tighten the tilt knobs by turning them clockwise to lock the TV in place.

Penerangan Imej: A person is shown adjusting the tilt of a wall-mounted television. An inset image highlights the tilt adjustment knob on the TV bracket, demonstrating how to loosen and tighten it to achieve the perfect viewsudut dan mengurangkan silau.

7. Penyelenggaraan

Penyelenggaraan berkala memastikan ketahanan dan operasi pemasangan TV di dinding anda yang selamat.

• Periksa semua skru dan bolt secara berkala untuk memastikan ia kekal ketat. Ketatkan semula jika perlu.
• Bersihkan pelekap dengan kain lembut dan kering. Elakkan pembersih atau pelarut yang melelas.
• Inspect the mount for any signs of wear, damage, or corrosion. If any issues are found, contact customer support.

8. Penyelesaian masalah

8.1. TV is not level after installation.

Penyelesaian: The wall plate includes a built-in bubble level for initial alignment. If the TV is not level, you may need to slightly adjust the height of one of the TV brackets on the wall plate before tightening the safety screws. Ensure the wall plate itself is level before securing it to the wall.

8.2. Difficulty adjusting the tilt.

Penyelesaian: Ensure the tilt knobs on both TV brackets are sufficiently loosened before attempting to adjust the TV's angle. If they are too tight, the TV will not move freely. After adjustment, tighten them firmly to secure the TV.

8.3. TV feels unstable on the mount.

Penyelesaian: Immediately remove the TV from the mount. Re-check all installation steps, especially ensuring the wall plate is securely fastened to at least two wood studs and that the safety screws on the TV brackets are fully tightened. Verify that your TV's weight and VESA pattern are within the mount's specifications.

9. Spesifikasi

10. Waranti dan Sokongan

Mount-It! stands behind its products with a lifetime product warranty. For technical support, missing parts, or warranty claims, please contact Mount-It! customer service. Our US-based support team is ready to assist you.

For more information, visit the official Mount-It! webtapak atau rujuk kepada pembungkusan produk anda.