Brady 86869 Equipment/OEM Safety Label Instruction Manual

1. Produk Lebihview

The Brady 86869 Equipment/OEM Safety Label is designed to provide clear and durable warnings on machinery and equipment. This label features a prominent "DANGER" header and the critical message "Do not operate without guards in place," accompanied by a relevant pictogram. It is supplied in packages of 5 identical labels.

Constructed from durable, self-sticking polyester (B-302), these labels are engineered for longevity and resilience. They are designed to withstand harsh environments, including wide temperature variations (up to 230°F), abrasion, and repeated spills and cleanings, ensuring the warning remains visible and effective for up to 8 years outdoors and even longer indoors.

This image displays the Brady 86869 safety label. The top section features a red bar with a white exclamation mark inside a triangle and the word 'DANGER'. Below this, the text 'Do not operate without guards in place.' is prominently displayed in black on a white background. To the right, a black pictogram illustrates a hand being caught between two gears, visually reinforcing the warning. The bottom edge of the label includes 'BRADY® #86869 BRADYID.COM Y75001' and a barcode.

Ciri-ciri Utama:

• Ketahanan: Weathers up to 8 years outdoors, even longer indoors, and withstands wide temperature variations (up to 230°F).
• Ketahanan: Flexible material conforms to most surfaces while protected graphics hold up to harsh environments, abrasion, and repeated spills and cleanings.
• Lekatan Kuat: Permanent, pressure-sensitive adhesive forms a long-lasting bond to even the most difficult surfaces and shapes.
• Cold Temperature Application: Adhesive allows the signage to be applied at 0°F (-18°C).

2. Arahan Pemasangan

Proper installation ensures maximum adhesion and longevity of the Brady 86869 safety label. Follow these steps for optimal application:

1. Penyediaan Permukaan: Ensure the application surface is clean, dry, and free of oil, grease, dust, or any other contaminants. For best results, clean the surface with an appropriate industrial cleaner and allow it to dry completely.
2. Pertimbangan Suhu: The label's cold temperature adhesive allows application at temperatures as low as 0°F (-18°C). However, for optimal initial bond strength, application at room temperature is generally recommended if possible.
3. Kupas dan Sapukan: Carefully peel the label from its backing liner. Avoid touching the adhesive side to prevent contamination.
4. Kedudukan: Position the label accurately on the desired surface. Ensure it is straight and in a highly visible location relevant to the equipment's operation or hazard.
5. Tekanan Tegas: Once positioned, apply firm, even pressure across the entire surface of the label, working from the center outwards to remove any air bubbles. This ensures full contact between the adhesive and the surface.
6. Masa Pengawetan: While the adhesive forms an immediate bond, allow a short period for the adhesive to fully cure and achieve maximum strength, especially in extreme temperature conditions.

The flexible material of the label allows it to conform to most surfaces, including irregular shapes, ensuring a secure and lasting application.

3. Understanding and Adhering to the Warning

This safety label serves as a critical warning to prevent serious injury. The message "Do not operate without guards in place" is a direct instruction regarding machine safety.

• BAHAYA: The red "DANGER" header indicates an immediate hazardous situation which, if not avoided, will result in death or serious injury.
• Mesej Amaran: The text "Do not operate without guards in place" explicitly states that machinery must not be used unless all protective guards are properly installed and secured. Guards are designed to protect operators from moving parts, pinch points, and other mechanical hazards.
• Piktogram: The accompanying pictogram of a hand caught in gears visually reinforces the risk of entanglement and severe injury if guards are absent or improperly used.

Always ensure that all safety guards are in their correct position and fully functional before operating any equipment. Failure to comply with this warning can lead to severe personal injury or death.

4. Penyelenggaraan dan Penjagaan

To ensure the longevity and legibility of your Brady 86869 safety label, follow these simple maintenance guidelines:

• Pembersihan: The label's protected graphics are designed to withstand repeated spills and cleanings. Use mild soap and water or standard industrial cleaning agents. Avoid abrasive cleaners or scrubbing pads that could scratch the surface.
• Pemeriksaan: Periodically inspect the label for any signs of wear, fading, or damage. Ensure the adhesive remains firmly attached to the surface.
• Penggantian: If the label becomes illegible, damaged, or begins to peel, it must be replaced immediately to maintain safety compliance and clear communication of hazards.

Proper care ensures the warning remains effective throughout its lifespan.

5. Penyelesaian masalah

While Brady labels are designed for high performance, occasional issues may arise. Here are some common concerns and their potential solutions:

Label Not Adhering Properly:

• Isu: Label is peeling or not sticking.
• Penyelesaian:
  • Ensure the surface was thoroughly cleaned and dry before application.
  • Verify the application temperature was within the recommended range (0°F / -18°C and above).
  • Apply firm, even pressure across the entire label during installation to ensure full adhesive contact.
  • If the surface is highly textured or porous, consider a different type of label or surface preparation.

Fading or Damage to Graphics:

• Isu: Text or pictogram is fading or appears damaged.
• Penyelesaian:
  • While designed for durability, extreme exposure to harsh chemicals or prolonged direct sunlight beyond its rated lifespan can affect the label.
  • Ensure cleaning agents are not overly abrasive.
  • If the label is significantly faded or damaged, it must be replaced immediately to ensure safety.

For persistent issues or specific application challenges, contact Brady customer support.

6. Spesifikasi

7. Waranti dan Sokongan

For specific warranty information regarding the Brady 86869 safety labels, please refer to the official Brady website or contact Brady customer service directly. Warranty terms typically cover manufacturing defects.

Sokongan Pengeluar:

• Kedai Jenama: For additional product information, resources, and to explore other Brady products, visit the official Brady Store on Amazon: Brady Store
• rasmi Webtapak: For comprehensive support, technical data sheets, and contact information, please visit BRADYID.COM.

No official product videos were found for this specific item in the provided data.