Overhead Door Wireless Garage Door Opener Keypad OKP-BX Instruction Manual

pengenalan

The Overhead Door Wireless Garage Door Opener Keypad (Model OKP-BX) provides secure, keyless entry to your garage. This weather-resistant keypad is designed for use with Overhead Door CodeDodger openers manufactured since 1995. It eliminates the need for remote controllers or keys, offering convenient access for up to three Overhead Door garage door openers. The new flip-up cover design features larger, lighted keypad buttons for improved visibility. The cover can be easily removed without tools, and its movement does not activate the keypad, preventing premature battery drain. A color-coded program button is positioned away from numeric buttons to minimize unintended activation.

Kandungan Pakej

• Wireless Keypad (Model OKP-BX)
• Skru dan Penambat Pemasangan
• 2 Bateri AAA (termasuk)
• Manual Arahan

Persediaan

1. Pemasangan Bateri

The keypad requires 2 AAA batteries for operation. These are typically pre-installed or included in the package. To access the battery compartment, slide the bottom cover of the keypad downwards. Insert the batteries, ensuring correct polarity (+/-). Replace the cover securely.

Image: Overhead Door Wireless Keypad with the battery compartment open, showing the placement of two AAA batteries.

2. Memasang Pad Kekunci

Select a suitable location on your garage door frame or an adjacent wall, ensuring it is within easy reach and clear of any moving parts of the garage door. Use the provided screws and anchors to securely mount the backplate of the keypad. Once the backplate is mounted, align the keypad with the backplate and slide it downwards until it clicks into place. Ensure the keypad is firmly attached to prevent accidental dislodgement.

3. Mengaturcarakan Pad Kekunci

To program your keypad with your garage door opener, follow these steps:

1. Set an Initial PIN Code: Press and hold the "PROGRAM" button on the keypad for 3 seconds. The LED will blink twice and two beeps will be heard. Enter a 4-digit Personal Identification Number (PIN) of your choice. Press the UP/DOWN button.
2. Put Garage Door Opener into Programming Mode: Locate the "Learn" button on your garage door opener. The color of this button (Yellow, Purple, Red/Orange, or Green) indicates the type of opener. Press and release the "Learn" button once. The red LED on the opener will begin to flash. You will have 30 seconds to complete the next step.
3. Sync Keypad with Opener: Keep the keypad about 11.8-15.8 inches away from the garage door opener. Enter the 4-digit PIN you chose, then press the UP/DOWN button. The garage door opener will activate, and the keypad will remain lit for 10 seconds, indicating successful syncing. If it fails, repeat the steps.

Operating the Keypad

1. Membuka/Menutup Pintu Garaj

To open or close your garage door, simply enter your programmed 4-digit PIN on the keypad and then press the UP/DOWN button. The garage door will activate. If you wish to stop or reverse the door's movement, press the UP/DOWN button again.

2. Setting a Temporary PIN

You can set a temporary PIN for guests or service personnel. This temporary PIN will become invalid after a single use or after a set period. Refer to the detailed instructions provided with your keypad for specific steps on setting and managing temporary PINs.

3. Keypad Backlighting

The keypad buttons are backlit, illuminating when pressed. This feature enhances visibility and ease of use in low-light conditions or at night.

Penyelenggaraan

1. Penggantian Bateri

When the keypad's backlighting goes out or the keypad becomes unresponsive, it's time to replace the batteries. Slide the bottom cover off, remove the old AAA batteries, and insert new ones, ensuring correct polarity. Battery life can vary depending on usage frequency and environmental conditions. For best results, use standard alkaline batteries. Rechargeable batteries are not recommended.

2. Pembersihan

To clean the keypad, use a soft, damp cloth. Avoid using abrasive cleaners or solvents, as these may damage the keypad's surface or internal components.

Menyelesaikan masalah

• Pad kekunci Tidak Menjawab: Check if the batteries need replacement. Ensure the keypad is securely mounted and within range of the garage door opener. Re-sync the keypad with the opener if necessary.
• Hayat Bateri Pendek: Frequent usage, extreme temperatures, or using non-alkaline batteries can reduce battery life. Ensure you are using fresh, standard alkaline AAA batteries.
• Difficulty Syncing: Ensure the keypad is within the recommended distance (11.8-15.8 inches) from the garage door opener during syncing. Verify that your garage door opener is compatible with the OKP-BX model.
• Buttons Not Lighting Up: This typically indicates low or depleted batteries. Replace the batteries.

Spesifikasi

Waranti & Sokongan

For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official Overhead Door webtapak. Simpan resit pembelian anda untuk tuntutan waranti.