Instruction Manual: Atlas Pistol Spin/Spin Pneumatic Insert Tool

Produk Selesaiview

The Atlas AE803-2520 is a high-performance pistol-grip pneumatic insert tool designed for efficient installation of threaded inserts. This spin/spin tool operates at 600 RPM and is equipped with a 1/4-20 thread adapter kit, making it suitable for various industrial and assembly applications. Its robust design ensures durability and reliable performance.

Image: The Atlas AE803-2520 Pistol Spin/Spin Pneumatic Insert Tool, showing its ergonomic pistol grip and front spindle.

Maklumat Keselamatan Penting

Always follow these safety precautions to prevent injury and damage to the tool.

• Baca dan fahami semua arahan sebelum mengendalikan alat.
• Pakai peralatan pelindung diri (PPE) yang sesuai, termasuk pelindung mata, perlindungan pendengaran dan sarung tangan.
• Ensure the air supply is disconnected before performing any maintenance, adjustments, or changing accessories.
• Maintain a secure grip on the tool during operation.
• Jangan kendalikan alat ini jika ia rosak atau tidak berfungsi.
• Pastikan kawasan kerja bersih dan terang. Kawasan bersepah atau gelap mengundang kemalangan.
• Use only genuine Atlas replacement parts and accessories.

Komponen Alat

Familiarize yourself with the main components of your Atlas pneumatic insert tool:

• Pegangan Genggam Pistol: Direka secara ergonomik untuk pengendalian yang selesa dan selamat.
• Pencetus: Activates the tool's pneumatic motor.
• Saluran masuk udara: Connection point for the compressed air supply.
• Spindle/Mandrel: The rotating part that engages with the threaded insert.
• Depth Adjustment Collar: Allows for precise control over the insert installation depth.
• Butang Terbalik: Used to reverse the spindle rotation for removing the tool from the installed insert.

Image: The official Atlas Tools logo, indicating the brand of the pneumatic insert tool.

Arahan Persediaan

1. Sambungan Bekalan Udara:

   Connect the tool to a clean, dry, regulated compressed air supply. Ensure the air pressure is within the recommended range (typically 90 PSI / 6.2 bar). Use an air hose with an adequate diameter to ensure proper airflow.

2. Pelinciran:

   Before first use, and regularly thereafter, apply a few drops of pneumatic tool oil into the air inlet. This lubricates the internal components and extends tool life.
3. Mandrel and Anvil Installation (if not pre-installed):

   Ensure the correct size mandrel and anvil are securely installed for the 1/4-20 inserts. Refer to the tool's specific diagram for proper assembly. Tighten all components firmly.

4. Pelarasan Kedalaman:

   Adjust the depth setting collar to achieve the desired flushness or protrusion of the installed insert. Test on a scrap piece of material before final application.

Arahan Operasi

1. Sediakan Bahan Kerja:

   Drill a hole of the correct diameter for the 1/4-20 insert in the material. Ensure the hole is clean and free of debris.

2. Load the Insert:

   Thread the 1/4-20 insert onto the tool's mandrel until it is snug against the anvil.

3. Letakkan Alat:

   Place the insert into the prepared hole in the workpiece. Ensure the tool is held perpendicular to the surface.
4. Install the Insert:

   Press the trigger to activate the tool. The mandrel will spin, pulling the insert into the material and deforming it to create a secure thread. Continue until the insert is fully seated and the tool stalls or reaches the set depth.

5. Retract the Mandrel:

   Release the trigger. Press the reverse button (if applicable) or allow the tool to automatically reverse, then carefully withdraw the tool from the newly installed insert.

6. Periksa Pemasangan:

   Visually inspect the installed insert to ensure it is flush and securely fastened.

Penyelenggaraan

• Pelinciran harian: Add 5-10 drops of pneumatic tool oil into the air inlet before each use or at the start of each shift.
• Kebersihan: Keep the tool clean and free of dirt, dust, and debris. Wipe down the exterior with a clean cloth.
• Air Filter/Regulator: Regularly check and drain moisture from your air compressor's filter/regulator. Ensure the air supply is clean and dry.
• Mandrel/Anvil Inspection: Periodically inspect the mandrel and anvil for wear or damage. Replace worn components to ensure proper insert installation.
• Storan: Simpan alat ini di persekitaran yang kering dan bersih apabila tidak digunakan.

Menyelesaikan masalah

Spesifikasi

Waranti dan Sokongan

For warranty information, technical support, or to order replacement parts, please contact your authorized Atlas dealer or visit the official Atlas Tools webtapak. Simpan resit pembelian anda sebagai bukti pembelian.

Untuk bantuan lanjut, sila rujuk maklumat hubungan yang diberikan bersama pembelian anda atau pada alamat rasmi pengilang webtapak.